WE 1911 disassembly

[AuraSystem]

Hay do you need to disassemble the safty to remove the trigger I want to replace my triger with a new one, don't like the plain one.

[commandercody5724]

THANK YOU FOR SHOWING THE HAMMER MECHANISM!!!!!!!!! I have a SOCOM Gear MEU, and i took it apart recently, and thought i had put it back together, but had some issues. When I saw the hammer box I said, "Hey, THAT'S what I did wrong." I took it apart, fixed it, and now it works perfectly! Thank you so much for that!

[USNSarDiver]

U must have a real 1911

[CDMAirsoft]

i knw this we 1911 vids old but my gun locks bac cuxz of a broken o ring in the back of the slide under the rear sights. Do you know how i could fix that or where to get a new one thanks.

[mutelatedLEMON]

dissasembles almost like the real thing

[cuzzilcdmounts]

Can you or someone please please helt me! When i press the button to make the slide release come out, the slide release wont come out!

[jedimaster8758]

hey i just got mine and so far so good except now when i fire the slide doesnt complete the cycle it jams up every shot theres nothing blocking it and im out of luck any help?

[elliotjames12]

why would u need to disassemble completely, any cleaning or mods/upgrades can be done in a few steps

[gundamalex226]

hey x7CUSICK8x my trigger got messed up so I want to replace it can I change it out and with out having to take apart everything

[Striker51z]

for some reason my internals wont shimmy out and the screw is removed. its the MEU version.

[Devshat112]

Did yours have a threaded orange adapter, mine did and I can't get it off.

[aldoreino]

Nice vid. Could u show me where I could find a manual for this gun? Evike didn't give me one for some reason.

[techiscool1]

how did u remove the orange tip?

[MistroJoe]

is the we a tm clone therefore compatible tm parts? e.g. outter barrels

[NonDairyYogurt]

@MistroJoe Yes, the WE can use TM parts. Except magazines (so I hear)

[MistroJoe]

could u use tm hi capa outter barrels excuse my ignorance

[Dean1806]

I hate air soft guns

[nau2883]

you screwed up on some terms



[petchdude]

How did you remove your orange tip?

[akumashizon]

Damn awesome video dude, I been looking for a video that shows how to remove the trigger so I could put a possible replacement one in there and this video helped perfectly. Just one question... is it possible to remove the trigger without taking all the reciever apart?

[MP5rules]

Thanks man! This vid allowed me to fix my safety

[Busybeth63]

THNKA lot this is the most helpful video of all the others i've watched. helped me figure out an issue with my barrel! thanks again!

[luisRRR69]

My WE is scratched to hell :(

[c2730461]

@luisRRR69 than sand it down :) .It will look awesome just like in this vid.

[DESERTHAWKIN]

fn airsoft fuck

[vsr10guy]

Thanks so much this is fantastic. You did get slot of parts names wrong though haha. But u know what your doing and this is in my opinion the best we tech 1911 video series out there. Thanks.

[10Johnson10]

Is this video mirrored? As in the video is flipped liked it was in a mirror, because when you remove those screws you are turning it clockwise. Or are they counter-clockwise threads?

[x7CUSICK8x]

haha ya the vid is mirrored

[LinearEdge]

you can just tell by the way the shell edjection port and safety are facing.

[300Z31]

@10Johnson10 I was going to ask the same question because the slide release is on the wrong side lol.

[300Z31]

@300Z31 Still a nice video showing the full disassembly.

[GushChew]

@10Johnson10

you should be a detective, i didn't even notice that!

[x7CUSICK8x]

post a video of it ill take a look and get back to u asap

[slym444]

Whenever I shoot mine, on the first shot the slide gets locked, but not by the mechanism on the side of the gun. The barrel just gets stuck and the gas mechanism stops over the magazine? any ideas?

[Sckisourz]

My hammer won't lock back.  Do you know what went wrong?

[x7CUSICK8x]

check the sear (fuck spelling) or the hammer spring if its not that make sure nothing is chipped on the hammer

[ChocolateOfTheOrient]

ugh wtf my gas internals n what not wont "shimmy" out at all

[x7CUSICK8x]

check the screw where the firing pin would be on the real one that screw should be all the way out then it will fall out if it is check for debris

[joncman123]

This is a good video saved my 1911 from a pile of clay that i dropped it in while under suppression

[x7CUSICK8x]

hahahaha nah this ones easy

[SSJSasuke777]

this is probably the most complicated disassembly ive seen in a pistol

[wrafnelPAHC]

this rules, thanks!

[x7CUSICK8x]

the image is mirrored this is a right handed 1911 i dont know if they make a left handed one

[papershaker]

Is the video image is mirrored or did WE make a left handed 1911?

[Trogiss]

Haha, at first when I skipped to the end to see it fully disassembled first, I was thinking, 'have fun putting that back together'.

Wow, that has way more parts then the Cyma Glock (CM.030).

[usarmykid92]

unscrew this

...

fuck.

ha, nice vid

[Playerc0]

I suggest...with any real or airsoft gun. to take it appart as far as you can and still put it bavk together, and clean and lube everything. Even though in airsoft guns no powder gets jammed anywhere...airborn particles can get jammed in and that will decrease the preformance and lifetime of your gun.

[x7CUSICK8x]

propane and you should just field strip the gun and oil the barrel slide and recoil spring, also you should oil the lower internal part (green gas dosent lube the lower internals)

[AwesomeAlex95]

Hey sup. Im thinking about getting this gun and should i use propane or green gas and if i use propane wut do i lube. Just the barrel ??