should've checked the weight, should've checked the load centre of forklift, should've had the tilt back, should've lowered off when truck was tipping, should've stayed in the forklift, should've got a licence, should've stayed at home.
I have that same model forklit and can tell you that these idiots in the video were exceeding it's rated capacity by at least 3 times the way they had their set up.
i love when fucked up shit happens to idiots. he didn't tilt back AT ALL! it was tilted down as low as it could go, which is below horizontal, and then he tried to drive backwards!! hahahahaha. i can't believe people this stupid drive forklifts. i hope he gets the bus to work.
who showed this guy how to operate a forklift. He should have tilted the forks back. but noooo and no one was telling him he was wrong. great job guys real team work .
The law of physics are not known to this man (or should I say ape?). How come that such a guy operates a forklift? And you are wondering why the world is in such a mess?
you could die from an accident like this in an electric lift. the battery under the seat can pop out and crush you against the stearing wheel. the battery weighs around 4,000 lbs.
You should be able to feel the weight with your arse...if you got too much load the feeling completely changes. I think everything he did wrong have been mentioned already several times.
What a idiot. His boom is at least 6 foot long. Its a tiny 3-4,000 @ 24" warehouse forklift He should only be picking up 500-750 lbs at 6' from the mast. It looks like a sheet of granite he's lifting. There are smaller pieces of stone in foreground.
All of this could have been avoided by moving the lifting point 2-3' closer to the mast or even better the propper size lift.
wrong bailing causes death the truck will crush you if you bail and its tipping over he only got damn lucky it is so small and it didnt hit solid ground.
When you drive a forker daily you can feel the weight under you. You just know whats over limit and whats not as soon as its lifted. Hes not a everyday driver , Dumb lift..
it's easy to say when you watch it on the screen, the guy had like 2 seconds to make the decison. And on the other side - the forks don't drop with the light speed... it was already too late when the back end lifted.
Yes but when you are trained to operate a Forklift they instruct you to hold the steering wheel tight brace for impact and don't move until you are 100% sure there is no chance that the Forklift may tip when you try to get off.
mast must be tilted back when a jib attachment is used. tilting forward will decrease longatudinal stability and allow the truck to tip forward
oh wait you already found out! haha
dont know if ide have stood beside it afterwards like that it looks even less stable balencing on the front like that your lucky it feel no further or it might have taken your legs too!
This is way our insurance company requires us to have our forklift drivers attend a certified training course and be drug tested intermittently. It cut our insurance and property loss cost. Also gives me a reason to fire a fork lift operator for screwing since I know they should have known better.
the guy in the truck doesn't seem to know whats going on as hes falling forward he's looking somewhere else, what a penis, if he'd a just jacked it down as it started to pitch foward he would of saved it anyway, and was it not a hint to the guy by the right side that it was overweight for the truck when the fucking mast was BENTover like a muthafucka
I use to work at UTI in South Crolina and I am telling you that was not a safety video at all!! If that was a safety video, first off ocea(or how ever you spell it)would have been there. He would have had a seat belt on and he would have held on tight and kept his arm's and leg's inside the fork lift. it could have fell on top of him as he was getting out. It could have been realy bad for him.
Maybe the machine doesn't have any seatbelt, or it's broken.
You're always supposed to hang on to the steering wheel IF YOU CAN in cate of a tip over.
But yes, most injuries and deaths from tipping or sliding machinery is caused by people trying to jump off, who go under spinning wheels or have the machine roll over them on the ground. There's a reason why modern machines have rollcages...
before you call someone a MORON, you should learn how to spell it. don't assume ignorance is linked to people who "smoke something". there are plenty of drug free dumb asses in this world. there are also many intelligent and productive people out there who "smoke something" for a variety of reasons. college kids who become professionals, talented musicians, politicians and even presidents of the usa have all belonged to this group of people. don't spread lame assed stereotypes.
Ignorant - more people die in forklift accidents becuase they try to get out of the seat and run. You think you can jump out of a tiping lift and get out of the way... this guy was lucky it went forward and not sideways.
Well I work on a forklift and the company he worked for probably didn't have a better lift. That little thing sucks and it's probably so old it doesn't even come with a seatbelt so it's probably the companies fault.
It is dangerous enough as it is having that heavy load with the forks all the way to the top... but then to turn the wheels with that load on it? STUPID!
When you have very heavy loads, you should only go forward and back... no turns. That throws off the weight distribution and you're going down.
I may have said "studid" instead of stupid, but at least I can blame alcohol. The fact is the forklift wasn't designed for that extention BS item they put on the forks but it may have worked at the jackass not TURNED THE WHEELS.
Do you have experience with a forklift lifting VERY heavy things? I was in the military and trained in forklifts of all sizes.
When you have a large amount of wait on it, like they did, you can only move forward and back...no turns or you'll do exactly this.
he should have at least tilted the load back a bit, actually why anyone would want to carry a granite slab on such a small forklift is beyond me, the obvious chance of the center of gravity changing and causing an accident like that are too high
Chances are that old Clark didnt come equiped with seat belts. According to OSHA, if it never had seat belts it doesnt need them. If it came equiped with it then they need to be there and function correctly.
OMG you all are idiots, he wasnt trying to pick the fucking load up, he was trying to do a burnout with the forklift morons..... ITs apparent that nobody has ever had a factory job before.
how about... a wearing your seat belt b dropping your forks when about to tip c crowding your forks back d getting a jib that doesnt weigh a ton e checking the weight of load and capacity of machine and f is just for being a f**ckwit
dumazz
fastestrapperjbattle 1 year ago
forklift never die... some people just don't know how to use them.
AssassinKirk29 1 year ago
that marble slab is not cheep
dexter2433 1 year ago
tilt your jimmy boom back it was wanting to fall over as it was...
mudder01player 1 year ago
tiny frickin thing, get a real forklift
carpentercorn 1 year ago
epic fail
mercedesguy123 1 year ago
what a fucking dumbass. that would be your last day at this job.
ballrub 1 year ago
should've checked the weight, should've checked the load centre of forklift, should've had the tilt back, should've lowered off when truck was tipping, should've stayed in the forklift, should've got a licence, should've stayed at home.
chancergordy 1 year ago
ill bet he shit his pants
MIKEL0352 1 year ago
der..lol that fork might be good to lift a pallet of feathers but no anything remotely heavy.
jwinters73 1 year ago
That's what happens when u cut corners n use to small of a forklift
TheVegastrucker 1 year ago
GOOD REFLEX DONT JUMP OUT OF LIFT !
louisalcha 1 year ago
did he died?
mcgr0401 2 years ago
I had a warehouse job, it sucked arse
Lionheart1188 2 years ago
I have that same model forklit and can tell you that these idiots in the video were exceeding it's rated capacity by at least 3 times the way they had their set up.
J0Boa 2 years ago 6
you would think they would of lowered the center of gravity of the marble plate
GWR4079 1 year ago
no seat belt????
jossy311 2 years ago
@jossy311 FOR THAT YEAR OF LIFT I DONT THINK SO
louisalcha 1 year ago
This is arranged. They guys says" Answered your question, didn't it?"
Very nice movie clip btw
denergod 2 years ago
your stupid, obviously his question was, " i wonder if this is going to tip over if i pick it up?"
andrewjohnston90 2 years ago
this could of been prevented if the forks werent raised so high
tractorracerfreak 2 years ago
Not the best use of forklift. -35 cool points
killroy71 2 years ago
cam was there, probably to document safe transport/handling.
nice bail, *****
Wast3m 2 years ago
No seat belt ???
Smithy318i 2 years ago
You know, if you paid attention to the weight limits from the inner to the outer part of the actual fork , this wouldnt happen.
Lobos222 2 years ago 4
No hard hat, no seat belt and he jumped out of the truck as it was still falling - might have been crushed.
ALAJOHNSTONE 2 years ago
i think this might be staged why was the camra there to begin with
markljesse 2 years ago
should have lowered it as soon as he felt his ass end start to rise...woulda saved a little dignity but not the product.
jswshawker 2 years ago 2
i love when fucked up shit happens to idiots. he didn't tilt back AT ALL! it was tilted down as low as it could go, which is below horizontal, and then he tried to drive backwards!! hahahahaha. i can't believe people this stupid drive forklifts. i hope he gets the bus to work.
tnucdenots 2 years ago
who showed this guy how to operate a forklift. He should have tilted the forks back. but noooo and no one was telling him he was wrong. great job guys real team work .
aax479mm 2 years ago
The law of physics are not known to this man (or should I say ape?). How come that such a guy operates a forklift? And you are wondering why the world is in such a mess?
WolYou 2 years ago
They can make two smaller counter tops out of that slab. lol
nUaSvAy 2 years ago
AI QUE BURRO!!!!
DÁ ZERO PRA ELE!!!
dallkarlos 2 years ago
Ok. That was a DUMB idea.
MacJARedd 2 years ago
your FIRED!!!
bluegap81 2 years ago
Should have put on back tilt and lowered the forks. Still not worth risking your life for a piece of marble.
Twat..
V12Sengg 2 years ago
Too heavy and too late:) He should practise first:
pushmania . com/flash-game/forklift-frenzy
AO682849 2 years ago 2
He could of been crushed...WEAR YOUR SEATBELT!!! Its there for a reason.
adzam86 2 years ago 10
you could die from an accident like this in an electric lift. the battery under the seat can pop out and crush you against the stearing wheel. the battery weighs around 4,000 lbs.
oregonflatland 2 years ago
the man in the forklift seems to say "ooops..."
pilopiloCH 2 years ago
You should be able to feel the weight with your arse...if you got too much load the feeling completely changes. I think everything he did wrong have been mentioned already several times.
DarkZodiacZZ 2 years ago
GET A BIGGER FORK TRUCK. me thinks
thegreencomposter 2 years ago 3
Where is his brain you mean!!! At first sight that clear!!!To much weight at the other end !
charlesparenteau 2 years ago
have any of you drove or operate the forklift? I've drove one, I've used it to haul stuff to the cart barn. I can finally can drive cluch now.
sideslide23 2 years ago
well THAT could have been avoided...
lower it quickly until the slab touches down again most likely would have done it.
his brain got stuck on "oh shit"
lejink 2 years ago 3
first thing he should have done was get a bigger lift then tilt the forks back.
robby844 2 years ago
Nice work assholes
RayAir1 2 years ago
No seatbelt and he jump! where he got is license ?!
Borisslavosk 2 years ago 2
przed rokiem 2000 nie wymagano pasów bezpieczeństwa w urządzeniach transportu bliskiego...
AdmiBWN 2 years ago
yeah a seatbelt would have helped ALOT here?
robby844 2 years ago
You better go CHECK your underwear!!!
LittleSlim78 2 years ago
Tthat is y it is a good idea not to overload these things.
darkpanda008 2 years ago
Where was his seatbelt?
rciacc 2 years ago
He should not have jumped out so quick.
opferte 2 years ago
How much did that slab cost? Is that place located in Van Nuys? At least he lived to see another day.
fourbyfourblazer 2 years ago
get a brain get it of ebay
conprodman 2 years ago
TIT!!
lbbassace 2 years ago
What a idiot. His boom is at least 6 foot long. Its a tiny 3-4,000 @ 24" warehouse forklift He should only be picking up 500-750 lbs at 6' from the mast. It looks like a sheet of granite he's lifting. There are smaller pieces of stone in foreground.
All of this could have been avoided by moving the lifting point 2-3' closer to the mast or even better the propper size lift.
foxacoustics 2 years ago 10
@foxacoustics Are u on the safety team?
HeavenBeas 1 year ago
HOLY CRAP THIS GUY WAS LUCKY!
As a forklift operator myself there are sooo many things wrong I saw here!
I'll bet he won't try that again!
plord28 2 years ago
Calm and collected driver did a nice bail...
pacmantab 2 years ago
wrong bailing causes death the truck will crush you if you bail and its tipping over he only got damn lucky it is so small and it didnt hit solid ground.
mysubsbang 2 years ago 5
this green forklift is not too strong enough...
follow weight rule
bestamerica 2 years ago
It's amazing how lucky dumbasses can be.
jesse420hoss 3 years ago 3
When you drive a forker daily you can feel the weight under you. You just know whats over limit and whats not as soon as its lifted. Hes not a everyday driver , Dumb lift..
willberg1 3 years ago 3
Ironically, you call this video "forklift safety".
eatonss 3 years ago
ouch, no fun situation but the loose strap was too long! at least he looked alright
princeword 3 years ago
plate steal heavy as even the attactment looks to top heavy for the fork lift panic just drop the forks
perabrown 3 years ago
moron, all he had to do was drop the forks when the back end starting coming up...
roops22 3 years ago
it's easy to say when you watch it on the screen, the guy had like 2 seconds to make the decison. And on the other side - the forks don't drop with the light speed... it was already too late when the back end lifted.
nagiewont 3 years ago
Yes but when you are trained to operate a Forklift they instruct you to hold the steering wheel tight brace for impact and don't move until you are 100% sure there is no chance that the Forklift may tip when you try to get off.
CM1523 2 years ago
are sure this is answer to my comment?? Cause I haven't got a clue how what you are saying is corresponding with what I said...
nagiewont 2 years ago
Made in China.
IHateWarmPickles 3 years ago
mast must be tilted back when a jib attachment is used. tilting forward will decrease longatudinal stability and allow the truck to tip forward
oh wait you already found out! haha
dont know if ide have stood beside it afterwards like that it looks even less stable balencing on the front like that your lucky it feel no further or it might have taken your legs too!
kipp8 3 years ago
This is way our insurance company requires us to have our forklift drivers attend a certified training course and be drug tested intermittently. It cut our insurance and property loss cost. Also gives me a reason to fire a fork lift operator for screwing since I know they should have known better.
rh30135 3 years ago
the guy in the truck doesn't seem to know whats going on as hes falling forward he's looking somewhere else, what a penis, if he'd a just jacked it down as it started to pitch foward he would of saved it anyway, and was it not a hint to the guy by the right side that it was overweight for the truck when the fucking mast was BENTover like a muthafucka
jackobcooper 3 years ago
he got off of it like, oh well fuck it!
085tub 3 years ago
lmao - take it out of his pay packet.
yeogav 3 years ago
retard
Deathsight11 3 years ago
they should have used a bigger lifter, heavier
minion6500 3 years ago
that was no video.. that was a low budget business making there own saftey video..
OoBETTYPAGEoO 3 years ago 3
yep no seat belt guy is lucky very very lucky it didnt tip sideways
FrettiYeti 3 years ago
lol oups
milestailspowerx100 3 years ago
I use to work at UTI in South Crolina and I am telling you that was not a safety video at all!! If that was a safety video, first off ocea(or how ever you spell it)would have been there. He would have had a seat belt on and he would have held on tight and kept his arm's and leg's inside the fork lift. it could have fell on top of him as he was getting out. It could have been realy bad for him.
Mylove03282008 3 years ago 2
no seatbelt, asshole.
baginDVS1 3 years ago 3
Ha ha.. thats a nice scant down the pan!
max6674 3 years ago
Hahaha is the cameraman saying CUT! or what?? Hehe very funny video!
norpan80 3 years ago
weight of load, attachment,icreased load ctr,trucks capacity, dynmic force,seatbelt. added together = W.T.F ?? idiots
ammanidiot 3 years ago
Haha agree, the sum of idiocy!
MinutemanICBM 3 years ago
loser
stubbenmonkey 3 years ago
nice safety video, but you DID not wear ure seatbelt.
or wheter it's an old forklift, which didn't included one?.
rushcruiser 3 years ago
Doesn't matter if it included one, they're easy to install.
everettpf3 3 years ago
I have the same forklift this model is from around 77' and they do not come with seat belts
J0Boa 3 years ago
Didn't read his load charts.
Jesusisyhwh 3 years ago
lol
mittparadox 3 years ago
naab!
rafaeltrece 3 years ago
ops
mayueleco 3 years ago
Put it down rather than watch it fall.
Icepacalapse 3 years ago
FIRED!!!No seatbelt?What an idiot.
DrummerMan1966 3 years ago
If that table was not there, both his legs would have probably been crushed. I hope he learned a lesson to stay inside and wear a seat-belt.
flyrock45 3 years ago
No seatbelt, and you are supposed to stay -in- the forklift in the event of a tip. Lucky he wasn't injured or killed.
JCruts 3 years ago
Maybe the machine doesn't have any seatbelt, or it's broken.
You're always supposed to hang on to the steering wheel IF YOU CAN in cate of a tip over.
But yes, most injuries and deaths from tipping or sliding machinery is caused by people trying to jump off, who go under spinning wheels or have the machine roll over them on the ground. There's a reason why modern machines have rollcages...
Griffencph 3 years ago
Hey accidents happen, big deal.
ROBBO1978OVBLYTH 3 years ago
FAIL
OMFGL0LWTF 3 years ago
NO Seatbelt!!!
salado777 3 years ago
LOL there's actual diagram on the trucks how heavy you can carry and how high
obviously this idiot aint capable of understanding such a thing
stoner2live420 3 years ago
FIRED
NsOakland6 3 years ago
before you call someone a MORON, you should learn how to spell it. don't assume ignorance is linked to people who "smoke something". there are plenty of drug free dumb asses in this world. there are also many intelligent and productive people out there who "smoke something" for a variety of reasons. college kids who become professionals, talented musicians, politicians and even presidents of the usa have all belonged to this group of people. don't spread lame assed stereotypes.
normlsparky 3 years ago
Time for a smoke break and a larger forklift. Why didn't the guy standing there run and put his weight on the ass end of the forklift?
beachnative420 3 years ago
Perhaps cos he didn't wanna get killed!
budgie2056 3 years ago
He would have acted like a counter balance, that's not gonna get you killed!
beachnative420 3 years ago
im hungry ..lol
eastsidewilliams408 3 years ago
Well,time for lunch!
liveup5 3 years ago 5
dumbfuck. A+ video.
JTMarlin8 3 years ago 2
You know there is supposed to be a load limit plate on there read it and think, while you still can.
OscarLimaMike 3 years ago 2
this folk lift is too small for the job man
sunmarty 3 years ago
nice fred, nice. ur lucky u didnt seriously injure urself.
RANCIDLANC3R 3 years ago
Lucky bastard almost broke his leg.............
BETO1BETO2 3 years ago
You need a heavy duty forklift for that, it's fairly obvious just looking at the load. Funny as Hell though.
heatmiser86 3 years ago
CUT KMFAO!!!!!!!
aflacduky 3 years ago
OK, so accidents can happen, but what about the SEATBELT?!?
writeshoprobert 3 years ago 3
lol u jump why stay in dumbass
travishartley 3 years ago
they dont really go fast enough to throw you out of your seat if they crash, its safer not to have them
Hairboy01 3 years ago
Ignorant - more people die in forklift accidents becuase they try to get out of the seat and run. You think you can jump out of a tiping lift and get out of the way... this guy was lucky it went forward and not sideways.
Nebtlob 3 years ago 4
I drive a fork, and your 100% right.
bleak351 3 years ago
stupids
sdrfgvrfgvsfravgdsvS 3 years ago
this is really funny because i just got done my forklift training
youmotherfuckingcunt 3 years ago
Well I work on a forklift and the company he worked for probably didn't have a better lift. That little thing sucks and it's probably so old it doesn't even come with a seatbelt so it's probably the companies fault.
FaceFace10000 3 years ago
HAHAH! Studid forklift operator!
It is dangerous enough as it is having that heavy load with the forks all the way to the top... but then to turn the wheels with that load on it? STUPID!
When you have very heavy loads, you should only go forward and back... no turns. That throws off the weight distribution and you're going down.
ronpaul2016 3 years ago 2
haha you are stupid, the forklift whas just to
small for the job.
SWmodel29 3 years ago
I may have said "studid" instead of stupid, but at least I can blame alcohol. The fact is the forklift wasn't designed for that extention BS item they put on the forks but it may have worked at the jackass not TURNED THE WHEELS.
Do you have experience with a forklift lifting VERY heavy things? I was in the military and trained in forklifts of all sizes.
When you have a large amount of wait on it, like they did, you can only move forward and back...no turns or you'll do exactly this.
ronpaul2016 3 years ago 3
geez, dont cry over it...
ps3rockslikeheaven 3 years ago
geez, dont cry over it...
ps3rockslikeheaven 3 years ago
You can't even spell weight ROFL!
AgentHog 3 years ago 2
Too much forward tilt!!
balmbra911 3 years ago 2
he should have at least tilted the load back a bit, actually why anyone would want to carry a granite slab on such a small forklift is beyond me, the obvious chance of the center of gravity changing and causing an accident like that are too high
hnsolo77 3 years ago
Chances are that old Clark didnt come equiped with seat belts. According to OSHA, if it never had seat belts it doesnt need them. If it came equiped with it then they need to be there and function correctly.
promaterial 3 years ago
"answers your question doesnt it?" lmao
Why wasnt he wearing his seat belt?
mulduvar 3 years ago
haha he's a safety instructor and he doesnt even have his seatbelt on
l1lMikel1l 4 years ago
to funny.
cailforniawoodpusher 4 years ago
HOLY CRAP! Was the forklift alright?
truckinjeff 4 years ago
Looked like a pretty expensive peice of granite there...
jmaugham 4 years ago
ROFL what a supernerd..
djnightspin 4 years ago
cooooool
disappears 4 years ago
stupid as hell to jump out, should have had seatbelt on
StaticRevelation 4 years ago
always funny when they jump out of the cab
grahamcoles1966 4 years ago
Cock !!!!! lol lol
ALFWEDARF 4 years ago
Excellent for teaching other what not to do.
Can I post this video in my web site?
Cip
cipguz 4 years ago
WHERE WAS HANS TO PREVENT THIS FROM HAPPENING? lol
wardrich 4 years ago
*KLAUS
wardrich 4 years ago
What a twat!!
v6ghiax24v 4 years ago
he snap the frount wheels
guitarmaster1324 4 years ago
The dope puts his helmet on after the accident.
bobadidi 4 years ago
fuckin tool ...
Jaybenz27 4 years ago
too small for that !!!!
slob80 4 years ago
How many safety violations can you spot in this video?
Hello, OSHA?
ke1lb 4 years ago
He just grabs his coat and leaves!
hyperboycomics 4 years ago
warning forklift will tip over do to stupidity
Stangfan88 4 years ago
pwned
MyTube1338 4 years ago
put your SEATBELT on.. And do not attempt to get off the forklift in any case of misbalance. it will SAVE YOUR LIFE.
ForkliftFan 4 years ago 2
Amen to that.
PaulyCracker 4 years ago
he was showing off to his gay friend next to him.. that's the true story.
zaim69 4 years ago
This is the song, about the safety video~~~~
Things did no~~~t, go quite as pla~~~~~ned
HE TRIED TO KILL HIMSELF WITH A FORKLIFT (HUZZAH!)
MiniFoo 4 years ago 2
Huzzah!
Blitz46002 4 years ago
Huzzah! LMAO!
sandusky434343 4 years ago
Huzzah!!! LMAO!
sandusky434343 4 years ago
it's Bob!
bigroy38 4 years ago
whoops posted that on the wrong video sry for being a jackass
matteshnaur29 4 years ago
OMG you all are idiots, he wasnt trying to pick the fucking load up, he was trying to do a burnout with the forklift morons..... ITs apparent that nobody has ever had a factory job before.
matteshnaur29 4 years ago
thats something to be proud of
richard833 4 years ago
That forklift is just too damn small to lift a load that big. Use a bigger one.
T764H7XC4 4 years ago
debilaosimo
lzilenas 4 years ago
how about... a wearing your seat belt b dropping your forks when about to tip c crowding your forks back d getting a jib that doesnt weigh a ton e checking the weight of load and capacity of machine and f is just for being a f**ckwit
gazsaz97 4 years ago
lol! so funny
gooziddaiejoon 4 years ago
Someone should make a safety video on how to safely make a safety video.
guruatomik 4 years ago 5
LOL
Scensum 4 years ago
LOL
richard833 4 years ago
why dont you tilt it back before backing it up?
bokmask 4 years ago
good job man!!! u will be promoted...
misaellabayen 4 years ago 2
He tried to kill me with a forklift, Hazaa!!
usac1 4 years ago 3
haha someones getting fired
mkpctv 4 years ago
doh!
Helpertin 4 years ago
Hát elég szakember volt
gelazso 4 years ago