Magnet motor/generator Adams motor replication

[TheRealDealinlife]

Look at me generator The New and Improved Generator. Good work,it looks good.

[deepcut66]

Nice work. Nice music by Mraz. His lyrics in that song seem to embody polar opposites - good choice.

How are your experiments going ?

[m3sca1]

@deepcut66 thanx for your interest.there is a new build in the pipeline ....

[Zoidborg1]

im an electrician

you have a magnetic motor or a generator, depending on how you run it, but you dont have both at once

the magnetic pulse is whats powering it.... huge energy input by the battery

have it light a 100w light bulb for 1 hour, you will see that battery drain exactly 100wh's

right now you have no load on it, you need output otherwise its "art"

[CollinMel]

Thanks for the vid - important preface @ the intro!

[m3sca1]

@CollinMel thanx for commenting-this video was made at a time when anyone posting videos about magnet motors on youtube were ridiculed and targeted for defamation.

the preface was added to address that issue and to bring awareness of the reasons for building such a device to the persecutors.

[Nabo00o]

Thank you for making this video, I am very interesting in Adam's motor replications.

I cannot say I completely understand the operation of it, it seems to be very close to the ssg (or rather the other way around). They have called it a switched reluctance motor...

Also, if anyone look at Adam's history in New Zealand, you will understand that it is working when their government invested so much time and money trying to discredit and directly persecute Adam...

[transfusablepng]

Free Energy is real and its here! The Oil companies are doing everything in their power to stop these information. If you want a Free energy machine do a search in youtube for the LT MAGNET MOTOR , Join the revolution!

[ozon12free]

@transfusablepng You are sick in the head

[valveman12]

@transfusablepng Brought to you by a lack of knowledge and Education. Your comment is ridiculous.

[bgbyer]

Good work.

[bazengao]

replicate others work's...plagiarism!?!?! hey brainiac how about you developing your own machines like they did?! science moves further by shattering its own laws and what you just did is reenforcing then! instead of studing and creating you own mechanism and machines you just copyrape others hard work. and if have the time to spend on that failure it means your just as bad as US so stop beying almight cus your not!... plagiarist

[m3sca1]

@bazengao the process of replication is not plagerism-its an attempt to verify the claims of others-that is all i have done.

attempt to verify-get that through your thick skull-same story with the LEGO thingy that you had such a problem with when you proceeded to call it a gay arse lord video.

for which i am still laughing about.

funny how the people that do nothing,claim to know so much,and then do all the trolling.

[bazengao]

@m3sca1 IF my skulll is thick it must be my alter ego messing around with my body, trying to prevent my knowledge from licking to this world of retards and dumb ass who never learn and dont want to learn! i will do nothing and show nothing for the wealth of mankind untill retards like you learn to shut up, listen and THINK FOR 5 MIN BEFORE BASHING SHIT ALL OVER YOUTUBE!!

P.S. "i am still laughing about" you trying to look ''smart'' and ''wise''...

[m3sca1]

@bazengaYo your as big a troll as jib1000-i see you found the spell check!

why do trolls have no videos?

because they dont do anything other than seek arguments,and because ALL they ever do is THAT,and they are scared that if they post vids they may be targeted by other trolls

your all the same-you imply that people that do interesting things dont learn anything from it

your a fkn no talent parrot that never questions what your told by authority-you hide behind a keyboard spouting euphamisms

[bazengao]

@m3sca1 your too retarded to figure when its about time to shut up aren't you?? so i'll do your cockroach retarded brain a favor... SHUT THE FUCK UP! i stopped reading what ever you writte days ago...

[m3sca1]

@bazengao stopped reading days ago huh?

came back though didnt ya...

just like all the trolls-runaway and say your not interested after instigating the argument which you lost.

if you walked around in life treating people the way you talk like such a big man on the internet,you would have 2 black eyes.

wise up and stop being a spoiled little baby.

maybe then you would find people can profit from what you do know and you might profit from what dont.

[jib1000]

I guess all that noise is the magical overunity in action... not friction and energy loss.

[jib1000]

Questioning the "boundaries" of know science, is different than trying to create something that is PROVEN to be false.

Overunity=False

Perpetual motion=False

There is always friction, you can't claim there isn't.

You aren't being scientific, you're being stupid.

You aren't going to create an overunity motor in your garage with 2x4s and radioshack parts, when actual scientists in actual labs with actual equipment can't do it either.

FAIL

FAKE

F U

[m3sca1]

@jib1000 sorry i missed your comment earlier-since i am the kind of person that has to see something to belive then i must build and test things for myself-i never claimed overunity.

its an attempt to verify Adams' claim.

maybe if you read the other comments you will see i already said it didnt work.

perpetual motion has been claimed by a fellow by the name of Reidar Finsrud,and that looks like a real device.

so complicated no one is trying to replicate it.

do'ers think,while parrots sleep

[jib1000]

@m3sca1 lol

You keep building 2x4 pipe dreams. I'll keep using my knowledge and education to pursue worthwhile endeavors. Good luck trying to solve problems actual scientists have proven impossible in your garage.

I'm sure Radioshack appreciates the business.

[m3sca1]

@jib1000 the electronic shops do appreciate my business,and i enjoy the brainfood i get from tinkering -why do have a problem with that?

what are your worthwhile endeavours?

[jib1000]

@m3sca1 lol

You're implying that what you do is worthwhile, which it isn't. I'd say whistling is something i do in my spare time that's more worthwhile that trying to build impossible machines in my garage.

I also don't understand how building stupid toys is brain food. What are you learning? What does whittling 2x4s teach you? I mean i guess if you're ever stranded on a deserted island full of magnets and boards you could make... well nothing really. Maybe a fire? Probably not though.

[m3sca1]

@jib1000 since you fail to understand,let me spell it out.

learning about things like Lenz law,Hysteresis loss,phases of coils,magnetic reversal,ferrite compositions,collapsing fields producing back EMF,one wire transmission of electricity,&desulphating lead acid batteries with pulses,is what i consider brain food.

these subjects are some of the topics i covered with Adams device.

whittling 2x4's is far more productive than whistling and it teaches how to sharpen a knife and not cut yourself.

[jib1000]

@m3sca1 You can learn more about these things from books than you ever can in your garage. In fact without scientific equipment, its difficult to learn any of these things through application, and definitely not as comprehensively as studying. I've actually learned how to sharpen a knife and not to cut myself learning to cook, which is a productive and useful skill. I can see nothing productive in what you are doing. Without a lab you can't really claim any useful knowledge either.

[m3sca1]

@jib1000 im guessing you learned to cook through hands on experience?

that is how i learn-dont think i dont read books to find answers as well as do research on the net.

i have worked in 3 different labs now and the only difference between those and a garage is the amount of equipment.

oh yeah and i dont have a sink in my garage.

just because you dont think its worthwhile,your line of argument is not going to stop me tinkering.

i enjoy it-its a hobby-and its sure more educational than TV.

[jib1000]

@m3sca1 You're youtube video is NOT more educational than TV. From watching your video i'm pretty sure you don't read text books. Most of my cooking instruction came from books, and watching other people cook. Trying to build something that is scientifically impossible is NOT a way to learn anything except defeat. What three labs did you work in? Playing with an easy-bake oven or "my first chemistry set" isn't a lab. The difference between a lab and a garage is your toy and a car engine.

FAIL

[m3sca1]

@jib1000 now your just trolling.

i didnt say my video was more educational-was talking about my hobby,that educates me.

you insult me by doubting my word,and imply that i dont read text books.

the labs i haved worked in are 2 quality assurance labs that had me testing raw materials to British Pharmacopiea std's and testing finished products for active constituent.i used UV/vis spectros,IR spectros,HPLC,GC,the standard assortment of wet lab testing,e.i.pH,viscosity.picno­meters,titrations...

[jib1000]

@m3sca1 No your video and your posts imply that you are barely able to read at all.

Done with this exchange. Your video and your subsequent posts prove to me that you aren't very intelligent. You're a fool, and do not possess a shred of a scientific mind.

FAIL

F U

[m3sca1]

@jib1000 good go back to your blow up doll and sorry life arguing your way thru it.

sure way to win friends and influence people.

in an attempt to show my girlfriend what an argumentative dickhead your appear to be,i googled your internet handle and found that not only are you engaged in argument with me but basically any exchange you have online is you trying be a smartarse.

ending your comment with FAIL FU implies you are nothing but a troll

im surprised you didnt sign off with FAKE&GAY

[m3sca1]

@jib1000 the 3rd is a food development and cosmetics lab that i still work in and all i do weigh colourings,artificial sweetners,and thickeners,and put it in beakers following very boring and repetative recipes,or prepare cream batches by weighing more stuff and put it in big pots and homogenise it.then pack the creams into bottles or jars

seriously i have learnt way more in my shed than in any of the labs.

[jib1000]

@m3sca1 I guess you and i have different definitions of the word laboratory.

The reason you learn more in your garage than in the so called lab is because your job is scientific equivalent of flipping hamburgers in your "lab". Don't try to tell people you have worked in three "labs" as a scientists when you haven't.

Done with this exchange. Your video and your subsequent posts prove to me that you aren't very intelligent. You're a fool, and do not possess a shred of a scientific mind.

FAIL

F U

[alexvetryak]

Dear Sirs, we are doing the same as you. Our results can be viewed on our website. vetryak.com.ua

[ChristopheBeau]

So if you were to hook up a generator on the axle would you be able to stay in positive territory? Then one would just have to scale the system up? How about starting the device, does it need an impulse of any kind?

Very interesting though.

Keep up the good work. :)

[m3sca1]

@ChristopheBeau i have tried it with the generator coils hooked to a capacitor and the same capacitor hooked to the run coils(no battery)-at best it winds down very fast so output is less than input-yes it needs an impulse to start-just to get it into the firing position of the reed-if the rotor is in the right position it will auto start,but the configuration of the magnets is such that wont sit in the firing sweet spot naturally.

thanx for your comment

[ChristopheBeau]

@m3sca1 Thanks for the reply. I didn't thing that output would have been more than input...as that would have been world news. :)

[LiamXaoh]

Folks buy a set of plans with details of a motor with some person's name (Bendini, Newman, Adams) on the basis that it is some remarkable device. What I see is electric motors that require an external power source. Magnets and coils working like any other motor ever made. Unless they produce free energy they are unremarkable porridge. They don't so...

[valveman12]

Seems to me that this has been tried several thousand times with the same unremarkable results. I would think by now if this technology actualy had a practical purpose, we would see it being used already. I'm not knocking anyone for experimenting, but when are we going to see actual practical results. i.e. new tech being used for modern transport.

[superwhiz88]

your massage are soooo true ,, you should say something about this cockroch desertphile azzhole..

[blyaxamuxin]

OMG

[blackle4ps3]

possibly save some labor using, (smart drive) washing machine motors,on single shaft with offset keyways

[x65535x]

Well you have successfully created a horribly inefficient electric motor. As for the higher voltage, it has to do with the lack of loading on the coil as well as the moment where the rotor is at it's highest rpm with no load on the "generator" coil creating a peak voltage.

[PorSiempreElMetal]

i dont understand all this about magnet blah blah. Everything about these things is the abc of electrical machines and drives. Go read books

[m3sca1]

i do read books-its common knowledge that we dont fully understand magnetism and its relation to electricity-can the ABC of electrical machines answer why i get higher voltage when the generator coils are switched open circuit for a small percentage of the duty cycle-or the reduced eddy current drag forces that lead to higher speed of the rotor,becasue of this open circuit switching,or why i can charge a capacitor with only one wire?

[Covey69]

I agree, I am seeing lots of people broaden their minds just working in theit own home labs. I think its wondeful you take the initiative to not only learn but teach us so as we can learn. I love these things and I envy your life to have that knowledge and those toys and the fun you must have exploring your own mind through others experience and wisdom.

Please doing what you do..

And thank you for taking the time to share.

I like to call you, The Sci Guy.

Watch ThaneCHeins#p/u/38/FmFbINO0dCU

[m3sca1]

a wise choice to stick with what you are tinkering with already-advice for others:

i think Adams advice on small neo's or using ceramic magnets rather than large neo's,is something that anyone considering building such a device should heed this advice-i see many attempts with large neodynium iron boron magnets,in this case bigger is not always better.

[DragonFlyback256]

Smaller magnets mean quicker timing. =)

[m3sca1]

i purchased instructions thru Nexus magazine many years ago,not sure if it is still available-info can be found online search for "robert adams magnet motor generator".

Adams machine used a commutator-i went for reed switches becasue it was easier than building a commutator.

Adams didnt have a second rotor on the shaft which i have incorporated for the adding of other coils and the tighter radius of the smaller rotor gives good switching when used with reed switches.

feel free to PM me!

[MaleAdaptor]

Hello. Is the booklet that you where flicking through on the internet? I want to have a stab at making an adams motor. I understand Lutec is based on Adams motor. thx.

[m3sca1]

the book only brief description-it is availabe tho-look for "The harmonic conquest of space"author Bruce L. Cathie.

detailed descriptions of construction notes can be found online too ;)

[TheGuru2You]

The Adams pulse motor:

Magnets on the rotor are attracted to the metal / iorn of the coils centre. The Coil is pulsed very very weak only to naturalise the attraction of the rotor magnet to the metal core in that moment before back drag slows the movement of the rotor. This is repeated for every magnet on the rotor. All magnets have the North pole facing the coils. Movement power comes from the permanent magnets attraction to the iorn coils centre only!

[abmz1970]

I believe that everyting is possible  now since we have the tools and knowleged to discover new ways of energy

[lykenth08]

how about using thicker guage wire on the pick ups? its less voltage but more amperage as that is way more inportant power wise. relay coils are good for trigger coils iv found but not as such for power generation.

[ABaumstumpf]

adamsmotors are a nice idea, butter there has never been even a single one that, like adams claimed, produced more erngy than it needed to run.

Its just like an oldfashioned motor with an inbuild generator.

But its a nice toy and good for school:

How to build your own very "scientific-looking motor".

But looks nice, keep on doing this

[gconol]

I'm still confused about the difference in the Bedini and Adams motor. Is there a fundamental difference in theory ??

[m3sca1]

adams motor is switched mechanically -whereas the bedini uses some sort of electronic switching,im not sure if the waveforms are similar as i ahvent built a bedini motor as yet.

thanx for commenting.

[lykenth08]

they are kinda alike, iv only seen what others have produced on the ocilascopes?.. them things any way. its just the bedini can do it alot faster as it uses a semi conductor or transistor to switch on and off. prone to heat and surge damage, unlike a swich, but that can fuse shut depending on what it is made of/ how big.

[existance12d]

have you got free energy?

[m3sca1]

no claims to OU here

[tjamassey]

You cannot measure power this way since the source is pulsed! You need another method.

[kdkinen]

how come Australia is so smart?

[spikeychops]

Nice work...please keep it up.

What are the croc clips made of?

If steel, they could be causing E.C.'s?

Good luck.

[m3sca1]

thanx for commenting -you know i totally overlooked that.

yes they are steel.

i have got rid of most croc clips -but those were a last minute addition.

i will remove them and solder it before i continue.

[spikeychops]

Hey, no problem m3sca1.

My pleasure. Hope you get to where we all NEED to get to with your research.

[dodoshlodo]

nice work, very similar to Bedini setups

[Inquorate]

Tnx for the link, downloading video right now.

[cribcat1]

I built a version of this based on the Eklin motor/generator which had an all steel rotor and a switched commutator. cool stuff!

[m3sca1]

how did you go?

any pointers?

[planexzeropoint]

I'm currently drawing plans for a similar project and have been told that a correctly wound electromagnet with the right wire operates better on high voltage like 1000 and will operate effectivly only using miliamps. I've also been told rubber gloves and a rubber matt to stand on. :)

[m3sca1]

thanx for commenting-im only using 24volts and have been bitten several times,so at higher voltages i would definately recommend some good insulation if your tinkering while its hot.

[marthale7]

I am trying to understand the difference between a bedini and a adams motor... Both use north poles out, but you are using only a reed switch. I have found if I try to add voltage recovery to my circiut I add drag to the rotor. Thanks for sharing!

[m3sca1]

bedini uses bifilar-adams uses separate circuits for drive windings and generator windings.

im only getting away with using a reed switch because of the fine windings on the drive coils limit the current and prevent the reed form burning up too fast.

i have burnt up many coils and relays before i tried this combo of 24 V relay coils as the drive stators,reed switch and 24 V battery.

even if the reed sticks and it stops-it wont burn up the coils.

need to get rid of the reeds.

[marthale7]

Yes, i have killed my solid state relay doing switching with 24V . 24V with spikes is lethal to all such solid state device. I have used 5 amp breakers with alot of sucess on my setups. Best fifteen dollars I have spent as they protect my circuits very well.

[jesslessthemess]

Just wondering if you've caught "ThaneCHeins" 's work, using high impedance, high frequence, high voltage coils for Lenz Law negation. And wondering what you think about it. (maybe search "HV coil" or his name on here.

[m3sca1]

thanx for your comment-no havent heard of Heins work before-will have a look tho...

[skinostra]

Hey m3sca1 GREAT JOB Like "netlethe "said don't listen to the wanker knockers, they are too LAZY or STUPID to do any experiments themselves.I appreciate how hard it is to get these vids made and up on youtube.

Look forward to your next vid, BTW what is the name of the book you show in this vid?

Thanks

[m3sca1]

thanx for your comment-the book is

The Harmonic Conquest of Space.

by Bruce Cathie.

the author spent some time with Robert Adams doing some calculations to improve efficiency.

you can find much more info on the net about his motor/gen design.

[mdbreedi]

Excellent work m3, love to watch your work. This is something I am interested in also. Keep at it and looking forward to your next video.

5 stars

[m3sca1]

thanx mate- i made some more improvements last night-just by moving a few wires around.

need to go to the electronics shop....

thanx for commenting

[knowledgemonger]

If the DMM is in series with the system with no filtering, you can't trust the DMM. They are not designed to measure high frequencies. The short pulse of current has a lot of high frequency content. Placing a large capacitor across the meter can help but be sure to start with the capacitor shorted and then open the short to make the measurement.

Reed switches aren't much good for high voltages. When the contacts open, there will be arcing because of the inductive kick.

[m3sca1]

yes im quickly becoming aware of the fact that even a good DMM will not even see the fast high voltage spikes,i know they are there-cos i can easily light a neon-and the thing has zappped me several times.

i have diodes to try tame down the arc in the reeds-they dont last long tho.

atm they are a cheap easy way to achieve mechanical switching,and im sticking with Adams' suggeestion of using mechanical switching if you want to get a head for what is going on.

thanx for your comment

[knowledgemonger]

It adds a bit of complexity but you can now get MOSFETs that can withstand up to 1000V.

A small capacitor right across the switches contacts may extend its life. If the rise of the voltage is slowed a bit, the contacts will get further apart. You could also place a gas discharge tube across it to eat the spike.

Unfortunately, most such ideas will lower the efficiency of the motor by taking some of the power and converting it to heat.

[tjgame2]

Cool

[netlethe]

Glad you decided to return with your knowledge '~) .. keep with it, and disregard the spoilers, as you say, mostly talk, and No Doing .. if folk put as much energy into positive form, rather than the negative, we'd all be much further forward .. paying less for energy, without so much Co2 .. adding this vid to my "Free Magnet Energy " Playlist .. 5*'s

Thanks.

[m3sca1]

thanx for your comment

[crob227]

excellent craftsmanship, wish the sound was a bit higher.

5 stars

appreciate the coarse on the Adams motor

[m3sca1]

its a new camera and it seems to pick up more background noise than vioce-i might try it with some sponge over the mic to kill the background niose.

either i will just have to shout into the coil

;)

[crob227]

Long as your making movies, i can turn my volume up. thanks for your work