How about opening your pie-hole and explaning what the fuck I am suppose to be looking at - picking up and dropping the revo means fuckall to me - idiot!
@RCCARTV100 lol well what else would you to call it? its still a revo even if the parts are all aftermarket, no other truck has this kind of chassis and suspension geometry.
its not crap people and that car will whoop on whatever you got. You may not like the color but then again you didnt buy it for him. I am the boys father and will beat the snot out of all you haters. Why dont you just stop hating all the time.
@ihatethiscrap6699 country two more things... Your right nobody bought it for him that color cuz his dumb ass took a top of the line rc monster and all he does is replaces then all he does is replaces the frame and spray paints it the colors of john Deere an your pissed off because your dumb ass funded it and let him destroy it
@ihatethiscrap6699 Learn to spell a complete sentence. DUDE! You know what a DUDE is? It's a farm hand. Do I look like a farm hand? Go back to drinking your radioactive water you dope!
ya thats a good shelf project but once you take it to the dirt an all that paint chips off an gets every where, it will look like shit, plus the added weight an like buddy said down there the truck is engineered to be the best outa the box, a couple mods but not the whole dam truck may as well part it together then buying it an swapping ever stock piece off of it, yu probably have enough parts to make a stock revo with no tire no esc an no motor haha
Looks cool, but.... everything that traxxas made that car for has been defeted by customization. Me personally, I like to drive my car where ever i want know that debre wont get inside wheres its not wanted, looks will stay the same and paint wont chip. And that chassis you bought was a waist of money due to the fact of everything being unbalanced now. To each his own though, so for what YOU wanted... good work. But for me, i would have never done that.
@Cyonyst Ever looked at a buggy or truggy? Totally flat bottoms, and no problems doing what they're designed for. I'm betting this guy spent a lot more time on tracks than he did bashing, so the low pan is perfect for him. Looks like a really low center of gravity. I'll bet it flies in the twisties.
am i wrong, i just didnt see center driveshafts going to the front and year diffs....could be wrong but the trans is off centered so i wondering how u got the center drive shafts to articulate to the outer diffs....other than that looked nice man
oh great... now when you go around corners the bottom plate skids the ground when the chassis leans... but the COG is dramatically lower, so all you have to do is stiffen the shock ... i still dont like E-revos.. they always heavier on one side....
@ seethesvt - It's not a simple BL conversion...the entire chassis and layout is custom. For starters, the motor is on the right...all other BL conversions have it on the left. Plus, it has a full truggy chassis conversion, which was hand-made! There is nothing simple, basic, standard or easy about what he did. Have you seen his gold E-Maxx? That is another work of art!
The spraypaint, seriously, you are complaining about that? Well, I guess so, since you can't do what this guy has done.
was it necessary to rebuild an already built chassy and to some what re-ramp a design that took probably a while to create? i can understand upgrades but idk about this...
this is not custom build, it's spray painted with brushless conversion and a couple extra addon's, custom build and converted are 2 different things, the second the rocks start flyin that thing is gonna look like garbage, all that paint will chip off
So, you did the brushless conversion with the mmm, and spray painted it... bfd. that paint is gonna chip in a second. i say, as an extreme rc basher with a highly customized erbe, this is NOT very sweet, nor customized. but, it looks alright. shelf queen style.
it not cost much, but only thing is time to build, i can tell is take me about 30 hour to get it done, only thing i buy is motor $275, mmm esc $130, battery 6s lipo $180, jr servo $50 that so i buy
@seethesvt hey WHY DONT U JUST TRY TO BE THE BIGGEST DICK OUT THEIR?!?! AND THATS NOT SPRAY PAINT ITS ANNODIZED ALLUMINUM god dude i ahte when people like u come on here and just try to make someone FEEL LIKE shit when they are proud of them selfs...ur a fuckin cock face faggot piece of shit OH YEAH CUZ UR SUCH A HARD CORE RC CAR BASHER?!?! UR FUCKIN COOL!!
@seethesvt I wish they made an aluminum chassis of the erevo....The nitro to electric makes you have to fork out dollars for high priced batteries....
metal isint really that great its better to have metal on plastic because plastic bends where as metal just snaps everything around it. The only prob is if u try 2 sell it ull never get all the money u spent on it back.
lol...i know, its a bit silly eh. but id rather see someone do that than spend 8000 on aluminum {notice i didnt say billet? } only to destroy it first time out! these poor kids dont realize the aluminum parts are made from POWDERED aluminum. its like the cheapest way ever to cast parts...weak too.
hell my buddy just built an all metal mini revo. lasted about ten minutes before it started tossing parts all over the street. lol
are you gonna drive it or just throw it around?
udayorama 1 day ago
that thing looks slow lol!!
traxxasguy1777 3 days ago
that is the most ugly revo i think i have seen yet.. john deer!lol
phatboyee1 5 days ago
awesome but it isn't an e-revo
TheDynastar1 1 week ago
that thing is beast looking
moocw7889 1 week ago
the only thing stock is the wing
rcqwerty695 2 weeks ago
Should've Had The Motor Mounted Under The Spur Instead Of Ontop For Lower CG. But Looks Good
eskimoGangsta 2 weeks ago
The tires ruined the look. You should use some better tires.
boliRULES 2 weeks ago
this chassis would look nice on a slash
TheSaltysack 2 weeks ago
put it on ebay I CALL IT
mytraxxasslash 3 weeks ago
how heavy is that sum bitch?
cynders23 1 month ago
huh that motor looks like a neu
Tigerbarb202 1 month ago
pretty
greenrolaids 1 month ago
ewww
Shanamar1 1 month ago
one crash... and itis bended like hell
1sjirk1 1 month ago 2
How about opening your pie-hole and explaning what the fuck I am suppose to be looking at - picking up and dropping the revo means fuckall to me - idiot!
ultraxgenocide 1 month ago
cool car dude
therccarmad 1 month ago
did u paint all the green and gold parts
kalishaROX 1 month ago
super low CG, must handle like a boss lol ^_^
traxxasrockhead 2 months ago
you can't please everyone...just do your own thing. I dig it.
monocogenit1 2 months ago
i hate it when people fully customize an RC and still call it its stock name
RCCARTV100 2 months ago 6
@RCCARTV100 This truck is 90% revo 3.3 with a can of spray paint. not my fav by any means, but i would still call it a revo.
Nfleury87 1 month ago
@RCCARTV100 Its still an e-revo. Its just got aluminum parts.
thestug93 1 month ago
@RCCARTV100 it is still using the design that was made by traxxas.
nerolllxeph 4 weeks ago
@nerolllxeph no not really because the motor in a normal e revo is in the middal and it has 2 batteries on each side
RCCARTV100 4 weeks ago
@RCCARTV100 yeah, its like the e-revo isnt an e-revo anymore, its just a nonamed rc car.
MrCr3ateful 3 weeks ago
@MrCr3ateful well why did he name it e revo if it isnt??? he should have just said for the title my custom rc car or something
RCCARTV100 3 weeks ago
@RCCARTV100 lol well what else would you to call it? its still a revo even if the parts are all aftermarket, no other truck has this kind of chassis and suspension geometry.
WillyPhister 2 weeks ago
@WillyPhister lol well you could call it a custom rc truggy
RCCARTV100 2 weeks ago
@RCCARTV100 well then that would be gay as hell just like you. lol
WillyPhister 2 weeks ago
its not crap people and that car will whoop on whatever you got. You may not like the color but then again you didnt buy it for him. I am the boys father and will beat the snot out of all you haters. Why dont you just stop hating all the time.
2012goingNutz 2 months ago in playlist RC
@2012goingNutz really dude... That's a little extreme. And personally an I don't see you kicking the snot outta anything but your own nose...
ihatethiscrap6699 1 month ago
@ihatethiscrap6699 country two more things... Your right nobody bought it for him that color cuz his dumb ass took a top of the line rc monster and all he does is replaces then all he does is replaces the frame and spray paints it the colors of john Deere an your pissed off because your dumb ass funded it and let him destroy it
ihatethiscrap6699 1 month ago
@ihatethiscrap6699 Learn to spell a complete sentence. DUDE! You know what a DUDE is? It's a farm hand. Do I look like a farm hand? Go back to drinking your radioactive water you dope!
2012goingNutz 1 month ago
ya thats a good shelf project but once you take it to the dirt an all that paint chips off an gets every where, it will look like shit, plus the added weight an like buddy said down there the truck is engineered to be the best outa the box, a couple mods but not the whole dam truck may as well part it together then buying it an swapping ever stock piece off of it, yu probably have enough parts to make a stock revo with no tire no esc an no motor haha
CoLaCreations 2 months ago
more like custom painted
TheSaltysack 3 months ago
That nice
xTheCODcastx 3 months ago
@xTheCODcastx lol ya but i still like it
718mattmatt 3 months ago
it looks like a john deere
718mattmatt 3 months ago 29
@718mattmatt really ;)
boeller97 3 months ago
Look at that pile lmao
rptbesnuts 3 months ago
Go Pack Go...
MegaRallycar 4 months ago
Looks cool, but.... everything that traxxas made that car for has been defeted by customization. Me personally, I like to drive my car where ever i want know that debre wont get inside wheres its not wanted, looks will stay the same and paint wont chip. And that chassis you bought was a waist of money due to the fact of everything being unbalanced now. To each his own though, so for what YOU wanted... good work. But for me, i would have never done that.
TheUnseenguy 5 months ago
nice but no spur gear cover... not good in my neck of the wood.... not even good with one hear
multiperpose2010 5 months ago
19 people crashed thier erevo brushless
TheFlippo123 6 months ago
Is it all aluminum and did u make that from scratch?????
hitmanjoe12 6 months ago
green looks sweet, trade revos?
ski5squad5 6 months ago
um.. when the car takes a turn, the chassis will twist.. making that low chassis plate scrape the ground.. not very efficient..
Cyonyst 6 months ago
@Cyonyst Ever looked at a buggy or truggy? Totally flat bottoms, and no problems doing what they're designed for. I'm betting this guy spent a lot more time on tracks than he did bashing, so the low pan is perfect for him. Looks like a really low center of gravity. I'll bet it flies in the twisties.
daltonultra 5 months ago
ill pay you $1200 for it
chrissballer 6 months ago
This has been flagged as spam show
looks pretty nice
RCLuva 7 months ago
looks like crap
hopcup1 7 months ago
I blew my load at 1:14
headbrainface 7 months ago
It is yours. you like it. that makes it cool enough for me.
Enjoy.
More vids?
EhnTeePee 8 months ago
very nice ;)
sklenulo 8 months ago
one ''big'' crash and...
1sjirk1 8 months ago
is it still 4x4?
mxbear99 9 months ago
broo, wayd u paint the stock plastic parts... the way they wer(black) would look soo much better
SKitles888 9 months ago
Its cool but do different colors
cascadebanshee421 9 months ago
The color scheme you've got going is uglier than a pile of catshit! What were you thinking?
GeneticallySuperior1 9 months ago
How do you get it green or any color
Ae867125 9 months ago
thats shit man, i wont beleive it runs till i see it run. you probaly jissed yourself when it didnt.
goldfisharegood100 9 months ago
your giving totally irrelevant responses to peoples comments, good work tho (:
optikvision 9 months ago
your truck looks like puke...
green?!?!?!?!?
waht the hell where u thinkin'?
savagegarage 9 months ago
That's ****ing nice! Good job and what's the chassis made out of?!
BlackOpsRampager 10 months ago
i don't see what you have changed=(
TheRevo33 10 months ago
looks pretty off balance...
PtownRC 10 months ago
That might be the worst color green I have ever seen!
gemster18 11 months ago
hey nice but I wonder if you hit a wheel hard enough what breaks since it's all alloy? Got any breaking point on that?
garagecrap 11 months ago
WOW nice car :)
SuperOverheater 11 months ago
am i wrong, i just didnt see center driveshafts going to the front and year diffs....could be wrong but the trans is off centered so i wondering how u got the center drive shafts to articulate to the outer diffs....other than that looked nice man
pimptydimp 1 year ago
Not good suspension
crazymanawesomeful 1 year ago
Is this by any chance project lime time from Thetoyz forums?
tonystewartdalejr 1 year ago
i love how its a traxxas but it has team losi velcro straps lol
TheMuffin134 1 year ago
that looks sooo awesome
xXDINOKINGXx 1 year ago
Man that's tight how does it run and do u sell parts
eddyboy1414 1 year ago
no talking?
98Ps3lover 1 year ago
nice job, but gold and green... next time other colors
MRrailaway 1 year ago
awesome man how did you get every thing green that is sweet
22mudman 1 year ago
awesome!!!! u should put more running vids up!!!
erevofreak96 1 year ago
no gears gard? mmmmmmh... Nice built!
jgodin03 1 year ago
Won't rocks and stuff get into the gears and stuff
marcostheman503 1 year ago
those shafts, are fucking massive
xXShadowRejectsXx 1 year ago
@xXShadowRejectsXx Same in the Summit HUGE!!! but they do break hehe
jaymzedge1 1 year ago
i hope it is as strong as it looks!
jhurst111 1 year ago
bunch of crap... why did you paint all the car lol ?! it look like a ninja turtle...
S3K7 1 year ago
You are doing it wrong, this trucks are meant to be used and abused, not to llok pretty! go bash it!
Datucky 1 year ago
did u make it 100% aluminum
MTown701 1 year ago
how much money did you put in to this mini revo
hethuncracka 1 year ago
great color scheme
supraelite07 1 year ago
oh great... now when you go around corners the bottom plate skids the ground when the chassis leans... but the COG is dramatically lower, so all you have to do is stiffen the shock ... i still dont like E-revos.. they always heavier on one side....
Cyonyst 1 year ago
@ seethesvt - It's not a simple BL conversion...the entire chassis and layout is custom. For starters, the motor is on the right...all other BL conversions have it on the left. Plus, it has a full truggy chassis conversion, which was hand-made! There is nothing simple, basic, standard or easy about what he did. Have you seen his gold E-Maxx? That is another work of art!
The spraypaint, seriously, you are complaining about that? Well, I guess so, since you can't do what this guy has done.
Tekkworkz 1 year ago
was it necessary to rebuild an already built chassy and to some what re-ramp a design that took probably a while to create? i can understand upgrades but idk about this...
gearhead9122 1 year ago
this is not custom build, it's spray painted with brushless conversion and a couple extra addon's, custom build and converted are 2 different things, the second the rocks start flyin that thing is gonna look like garbage, all that paint will chip off
jaroncyr 1 year ago
all you did was buy a few bolt-on upgrades and spray paint everything. not hard.
pieman12345678987654 1 year ago
Very Nice i love the color only the wheels aren't nice you have to buy the proline en then paint them in green or something :P
but i''s very nice
(='.'=)
iElimination 1 year ago
i think its sick! anodized aluminum? where did you find that? did you do it yourself?
crf450ish 1 year ago
is that a neu 1527???
nainladen 1 year ago
DUDE THAT IS SUCH A BAD ASS CAR!
gtheferrett 1 year ago
Some one had too much tine on there hands. When's the last time u got layed??
Crankland 1 year ago
dude drive it
ninja2monkey3 1 year ago
It's spray painted?
burnout616 1 year ago
Dude! Thats some messed up shit right there. I LOVE IT!
tompa214 1 year ago
that thing is beautiful...lowest cog i've ever seen on a revo, but why the green?
FUdirtbag 1 year ago
sick !!!!!!!!!!
RCBoyeez 1 year ago
Simply WoW wood love to twist that stick
on2theDRE 1 year ago
how much do those cars cost stock? and how much did you spend doing the mods? awesome buind tho nice work(:
123MRbacon123 1 year ago
I want to build one but.....im aint got no money....
douhnutz 1 year ago
So, you did the brushless conversion with the mmm, and spray painted it... bfd. that paint is gonna chip in a second. i say, as an extreme rc basher with a highly customized erbe, this is NOT very sweet, nor customized. but, it looks alright. shelf queen style.
seethesvt 1 year ago
it not cost much, but only thing is time to build, i can tell is take me about 30 hour to get it done, only thing i buy is motor $275, mmm esc $130, battery 6s lipo $180, jr servo $50 that so i buy
giaichau1980 1 year ago
@giaichau1980 its nothing special.
seethesvt 1 year ago
This has been flagged as spam show
@giaichau1980 thats alot of money
brandon9491 1 year ago
@seethesvt hey WHY DONT U JUST TRY TO BE THE BIGGEST DICK OUT THEIR?!?! AND THATS NOT SPRAY PAINT ITS ANNODIZED ALLUMINUM god dude i ahte when people like u come on here and just try to make someone FEEL LIKE shit when they are proud of them selfs...ur a fuckin cock face faggot piece of shit OH YEAH CUZ UR SUCH A HARD CORE RC CAR BASHER?!?! UR FUCKIN COOL!!
gtheferrett 1 year ago
@seethesvt shelf queen fo sure
TheGDaaR 1 year ago
@seethesvt
exaclty
98AHR 11 months ago
@seethesvt
exaclty, stock brushless with cheesy paint
98AHR 11 months ago
@seethesvt I wish they made an aluminum chassis of the erevo....The nitro to electric makes you have to fork out dollars for high priced batteries....
dsmdeegen 8 months ago
was tha a nitro revo at one point or it was erevo all the time
Xmoto16 1 year ago
Feeling nice and btw how much did it cost you I would love to get my revo custom like my old tmax lol sadly I recked it prety bad and got a e revo
darkly24 2 years ago
that is f***ing amazing, i like how the motor, and shit is off to the side,
enough room for a small camera, just cut a hole in the front, lol : P
0012554 2 years ago
not to be mean but why aren't you talking?
gutenbird 2 years ago 7
i been out of rc, that why i didnt go on to youtube
giaichau1980 2 years ago
@gutenbird hes a mime duhhhh lol
wrxsavvy 1 year ago
wow that is absoulutly amazing
Snox845 2 years ago 2
metal isint really that great its better to have metal on plastic because plastic bends where as metal just snaps everything around it. The only prob is if u try 2 sell it ull never get all the money u spent on it back.
WildSharkProductions 2 years ago
@WildSharkProductions thats mostly stock shit...its been cut up and spray painted.
Duckyistrippin 2 years ago
@Duckyistrippin wow fail lol
WildSharkProductions 2 years ago
lol...i know, its a bit silly eh. but id rather see someone do that than spend 8000 on aluminum {notice i didnt say billet? } only to destroy it first time out! these poor kids dont realize the aluminum parts are made from POWDERED aluminum. its like the cheapest way ever to cast parts...weak too.
hell my buddy just built an all metal mini revo. lasted about ten minutes before it started tossing parts all over the street. lol
Duckyistrippin 2 years ago
that is an amazing car ur got right there
dizzyinzo 2 years ago 6
cool but spray paint wont last long at all looks light and it a very low c enter of gravity kick ass on the track
omfgg3tlost 2 years ago
that is the coolest mod for a e revo i have ever seen. How much did it cost
cod4mw2123 2 years ago
i dont know how much but is take a lot the time to do it
giaichau1980 2 years ago
cool, but spray paint wont last long...
fathead431 2 years ago
Money
hpi096 2 years ago
doesnt cost much
giaichau1980 2 years ago
asome e revo
22yoshifan 2 years ago
its a awsome rebuilt
matta199212 2 years ago 4
yes
giaichau1980 2 years ago
iz that 1/10 or 1/16
traxxasmaniac123 2 years ago
its acualy 1/8
Dirttbike4life 2 years ago
is 1/8
giaichau1980 2 years ago
what kind of batter is that it is huge
Quentin2144 2 years ago
the battery i was build my own 38c 80c it is power full
giaichau1980 2 years ago
that looks wayyy better than the new e revo. traxxas should have made that type of chassis. nice build man.
aznifull 2 years ago
How much was this build
minnesotawild15 2 years ago
that is awesome i want one
paintball1455 2 years ago
I thin u should show it going
dbcxn 2 years ago
Real nice!!! So that's a Nitro Revo conversion? Is the chassis plate custom? What material is the chassis made of? Thanks, ~Combat Chuck
initialkracing 2 years ago
all the chassis is alumium
giaichau1980 2 years ago
the incredible hulk
MrRobban1234 2 years ago
thanks
giaichau1980 2 years ago
nice truck guy. john deere colors (kinda)
2583803 2 years ago
this is a hobbies........man
giaichau1980 2 years ago
DAMN 1st the E-MAXX now the E-REVO you 1 rich mother F***** ☺
traxxas91296 2 years ago