Screen Printing production techniques How-to part 4

[gratefulrod67]

Way to go Chief. Somebody that really does know about production. Very helpful to the novices out there

[KentuckyArtist]

he is the Bob Ross of screen printing super FAST!!!

[Ryonet]

as long as the subtrate can handle the curing temp this should not be a problem..

[tysonoc714]

can this method be done on Velvet?

[Ryonet]

Thanks so much for the kind comments. Please let us know how we can help you with your purchase when you are ready to go.

Ryonet Sales

[canuckchris2010]

this guy gets me dizzy, super fast. i can only hope to be this fast. you guys are the best. buying my press at the end of this month. soooo pumped

[XtremeInkz]

The reason why you think he is slow is he is trying to show people that are not as great as you to understand how to do this. I'm sure if he need to kick it up you would see he is very fast. Great Video

[XtremeInkz]

I think i watch this video more then any video that you have done. I know word for word on this Video. I learned how to place a shirt and how to let the press work for me. Some times when i'm in my shop work i'm talking just like him and my wife cracking up. Great Video

[tuberidersim]

this guy never floods his screen. Is it his stroke method that put down enough ink without a flood?

[sixstanger00]

@tuberidersim Yes, there are two stroke methods, "pulling" and "pushing." On a "pull" stroke, there is no need for a flood stroke, because the squeegee is pulling the ink in front it across the screen. With a "push" stroke, you pull the squeegee towards you lightly, flooding the screen, then apply pressure and push the squeegee away from you. Both methods work, but some people say the push method is less tiresome...I've been pulling for 5 years though, and it doesn't bother me...even on 230 mesh

[XtremeInkz]

I look back at this video and it was the first one that i watch and it is really funny now that i just go back 2 years and how much i have learned. This is not for everyone it is a lot of work. But i recomend that everyone that would like to do this to go get some classes in screen printing. Ryonet tought me some stuff in there classes and help me over the phone. great guys.

[willyindep]

why do you have to flash between each color when flashing?

[sixstanger00]

@willyindep Well, you don't HAVE too, but typically on a multi-color job, where two separate colors are flush against each other in the artwork, you'll want the1st to be dry before you print the 2nd, because once you lay down consecutive prints wet-on-wet, the ink from the 1st color will start to build up on the back of the 2nd color screen, and when the 2nd color is printed, the sharpness will be lost between the two colors, and where they meet will start to look "splotchy."

[rhenybaby]

i have never seen this done before, and i am glad that this guy is very thurough with his teachings. it makes me think that i could go out there and try it and not look like a TOTAL GOON trying it! i am very dislexic and i couldnt do this job effeciently, and i am glad that there are ppl that can do this on a daily basis!

[awnold1]

i couldnt imagine a quicker more informative way to bone up on screenprinting for newbs, thanks!

[21ELJEFE21]

this guy is to slow im more faster in pirinting 12 colors ok

[Ryonet]

Good! that's what we like to hear.  Keep it up!!

[Bernworx]

Thanks for the Video Don , great info

[dsfrobots]

How are you able to layer 3 colors without drying in between? Doesnt the first color you put down stick to the bottom of the next color's screen, and so on??

[vaughncollins]

i watched all the ryonet vids after buying the semi pro kit.

i like this guys way of explaining things the best, because he is the fastest, and doesn't repeat himself over and over

[michelletough]

What kind of machine was this done on? It looked like it had 7 screen brackets

[theValleyVault]

Excellent, excellent video. I'm a huge noob but I've screen printed over 100 t-shirts (10 of them 3 color using 3 small screens) using the very basic Speedball kit setup from a craft store (go ahead and laugh) and this helps explain how they pros do it, which helps me understand how to do the very basic things. Thank you for your video. All my stuff came out good, but I learned a huge lesson about black sweatshirts.

[bradmacaroon]

Nice vid. thanks for sharing your experience.

[JayNegative]

please disregard that last comment i guess i forgot i was a a different computer to log in on my name. but once again:

Hey this guy aint back floodin the screen. ha ha. Ryonet im going to the Grendel in denver dont know if you've heard of it but my boss is paying for it.

cheers

and great videos

ps. Do you guys offer good business dicounts on chemicals; free freight, stuff like that?

[zerosk8er144]

Hey this guy aint back floodin the screen. ha ha. Ryonet im going to the Grendel in denver dont know if you've heard of it but my boss is paying for it.

cheers

and great videos

[najvas]

Scratch that last comment....it was for something else, sorry.

[najvas]

Ryan, I believe I can answer this one, if you put the shirts on top of each other after you have screen printed them without flash curing, you risk the possiblity of ink touching the other shirts and ruing the whole job.

[TerryRoberson]

What is the standard mesurments from the collier to the tip of the pallet?

[TerryRoberson]

Questions: what makes ink go thru shirt? what makes your second,and third,color not line up even when you use your marks: And what makes ink lines spred,run into each other like it duluted?

[Ryonet]

Sorry those questions could be any number of problems that I can't take the time to try and cover here. Have you gotten any training or watched any training videos on screen printing?

[TerryRoberson]

The only training that i have is watching your videos over and over. It on shows really basic stuff. Mark has help a lot at Ryonet he is a great tool in all the help he has given us.

[JayNegative]

Subimination, over flashin may cause this. when the ink gets hot enough it will turn into a gas and will stick to whatever is closest, such as other colors. And in my experience the only reason why other colors arent lineing up, it could be use some more spray adhesive and let the shirt cool before doing the other colors. sometime you cant always rely on registration marks.

[Ryonet]

as long as you run them through the dryer they won't smear.

[4ceg]

Is it okay to place those shirts right on top of each other after you take them from under the screen? Are they not making it smear like that?