ok so i hope he had fun with the exhaust and intake manifolds and what did he do with all the coolant that poured all over the ground once he pulled the head off lol. Parking lot mechanic?
So where's the rest ?? I wanna see him toss every cam retainer inside a big plastic container then mix&match them as he re-installs everything, would do a good video hearing the cam lobes beeing chewed to bits..
@zanuha r u retarded? a thief doesnt even no how 2 do a head gasket. all they no is popin ur ignition n stealin the whole car. y would a theif know how 2 change a headgasket? retards
if you care about your car, you just dont do that shit like that.... It would be like building a motor in your driveway or at your local mc donalds parking lot.
oh come on.. you just dont do it that way...you really think he brough feeler gauges with him? just in case he has to check for a straight edge? lol and even if he puts the head gasket on for a ''quick fix'' its just stupid in my opinion... because the head gasket itself is about the same price as getting the car towed. so why would you bother puting a temporary head gasket? not worth the trouble at all... He only got his hands dirty cause he had the crowd there to watch him be a ''gearhead''
What the hell lol, you cant just change the head gasket like that on the spot, first of all the head is probably warped so its needs to be shaved. second, why the hells is he taking off the camshafts?? this guy probably never changed a head gasket properly, and thats why it blew.
@KaLo4G63 He's taking off the cams so he can tilt them forward to get the timing belt off so he can lift the head. I think he's doing a quick fix so he can drive it to the shop to do it properly which is why he's not milling.
When u drive an old car you should always atleast carry some tools with you. I always carry a small toolkit on my 94 mustang gt trunk cuz well its a ford lolstang and it might break down anytime. If this happened to me i would have prolly attempted to do it on the spot also since a 5.0 is so easy to work on.
@shoprat17 Lol now that you say that, my car has been having problems lately and it just randomly leaves me on the side of the road, i already changed TFI module, Coil and the pickup coil, basically every ignition part is new and it did it again so wtf, i think either my ECM is toast or i got a fuel pump thats going out. Its hard to explain how it would stall but it did not seem like fuel pump problems and more like spark fading in and out so i started with ignition parts.
now me and the mad scientist gotta tear apart the motor and replace the piston rings you fried haha just messing man props on being able to change the head gasket right on the spot!
I'm not impressed...we dont even know if he finished tha job. I can take 20 bolts out on camera. The first thing to know is WHY the head gasket blew...waterpump, thermostat, maybe his head is warped. I love the "lets get it" attitude, but we dont even know the outcome of this, so i cant be to impressed with a video of a kid taking out some bolts...he very well may still be in that parking lot lol. - Your friendly neighborhood skeptic
nice. done major to minor repairs in parking lots before. rebuilt truck engines in the bush before. kids got the right attitude. if it breaks dont cry and moan just fix it. of course if u have no knowledge of what your doing or needs to be done u call a hook but this should be a lesson to everyone. learn how to fix your ride
Only issue is that you could really be opening a can of worms.There is the slight possibility that it also could be the head that is cracked or warped or even an issue with the water pump not pushing coolant to the block, and etc. and i'm not sure that everyone would want to carry a head gasket and a head around with them all the time. That's why i stick to diesels, i've seen a diesel with a blown hg being driven with no compression loss or overheating, even with a ml of oil it'd still run fine.
All you computer geek mechs don't know shite about wrenching. If he knows the engine this could be a quick job and RTV will get him home. I've gotten the head off a 4 popper in 30 mins. He had a battery powered impact wrench. That saves a ton of time. If he gets the head lifted a bit, he could get the RTV on there, then put it all back in an hour or three. He didn't need any time for studying the manual. Just work. Props to him. Knows his car.
dude mad props i lived in fairbanks,AK and this happend to my lil suzuki x90 i always carried extra gaskets collant and other bs cause at -20 shit like this happens its a shity cold situation so mad props
Head gasket is like 5hrs but theres ways around shit to cut time i got the head off my honda in like 3hrs which was my first time bet could happen faster ppl think it takes forever it really dont....had heads off my 5.0 in 3.5hrs...
I'd probably drive home first before I start removing everything. lol. Most of the time a headgasket job is a 2 day job. I have done it in one day, but that's only if you work non-stop.
@LordLo i wouldnt say a whole day. ive done head gaskets in a 5-6 hour range at work...if you are familiar with a car which this guy obviously is since its his, then you should do it with no problem. the biggest pain is having enough room to move around everything. but tegs have sooo much room.
I honestly cannot stand reading some of these god damn comments. RTV all day. They actually DO INFACT MAKE cordless battery powered drills with high enough torque to remove wheel nuts let alone some cam brackets. It's as if you're not infact sitting infront of a computer. Its as if you all deliberately say things, knowing you're wrong when you can clearly use a search engine on the computer, YOURE FUCKING SITTING INFRONT OF. He's burning coolant. A proper application of RTV will get him home
@EricHayward Depends on the location in which it's blown. And again I'm not suggesting it will resolve the issue. If anything, again, it'd be a temporary solution given the correct circumstances, to get yourself to an area in which you can actually perform the correct procedure to fully resolve the issue. With that in mind, I've seen plenty of parking lot engine pulls and tranny swaps all over Audizine. Also I'm not implying the kid has any idea of what he's doing.
@bread996 now changing your stories read what you say before you post it go ahead and take that impact and replace those bolts tell me what happens hahahaha
@wbazar Yes, I use a 12v cordless impact driver to REMOVE nuts and bolts, which is exactly what he's doing...dumbass.
Furthermore, who drives around with a spare headgasket? He's a tool trying to show off. Blows the motor, immediately jumps out and grabs his tool kit to show how neat he is.
What an idiot. I suspect he did it on purpose so he could show off his 'mechanic skillz'. Loosening bolts with a drill (not impact driver), which doesn't have enough torque to remove properly torqued bolts. They were clearly left loose for a reason. Why else drive around with all the tools required to do the repair?
Also love the way he yanks the wires out instead of pinching/pulling on the boots directly to prevent damage. Never buy a modded rice rocket!
@Bread996 Those bolts don't get torqued down hard due to the aluminum head....but yeah it does look like he was expecting his car to take a shit any moment so he carried the tools with him.
@Hondaminican My thoughts exactly. There are ricers, and then there are guys like this who drive imports.
I respect this guy. Totally.
I've actually done something similar. Changed a timing chain in a SBC at the side of the road. Parts lined up on the curb kinda makes people do a double take....
@AustinMcFarlane haha i know i wasn't really thinking i was drunk when i watched this. i have my motor tore completely down right now so i know what it takes to get the head off.
@anthonynumber12 Didn't look like he even has a torque wrench in there. And the reason it's leaking is probably because it wasn't properly torqued from the last time he did it, considering that that's a pretty clean, new looking engine.
@AreThereNoMoreNames yea, i honestly dont even remember my comment ur replying to tho. but yea that can defently cause problems if u dont torque it down 2 spec
@NoahCinema i wouldnt say that, remeber most ricers dont know anything about how cars work nor repair them *exceptions being stuff like oil changes, air filter, very basic stuff* this kid clearly knows his car inside and out. he might be a ricer but if he is he's a 3 on a scale of 1 - 10 ,,, 10 being the worst ricer possible.
Dude I respect you for fixing your cars problem on the spot that shows integraty. Plus you got balls not to trust any shade tree machince to fix it for yea.
Warped valve cover, warped cams, prob used the same valve cover gasket, prob used the same cylinder head bolts, and prob didnt torque the bolts down to OEM Specs!
@Legotruck82 my father! the best mechanic, 1 of his past cars ltd crown vic had every tool you'll ever need to air compressors, air guns, electricity (actual outlets) and the best sound system. his car was crammed pack in the trunk with tools! and his car was a beast! the engine was so clean, it was a nice white color with the white wall wheels omg i loved that shit. every part in the engine bay was clean enough to eat off. and he used to just see someone broke down and pull up and fix that shit
LOL Fix it right on the spot.
midgetmayo 40 minutes ago
Shoulda had a V8.
AandWProductions 7 hours ago
Damn hes hott!
eskimochild87 7 hours ago
ok so i hope he had fun with the exhaust and intake manifolds and what did he do with all the coolant that poured all over the ground once he pulled the head off lol. Parking lot mechanic?
MrRetahreggin 8 hours ago
He sure is skilled!!
GameplayXperience 9 hours ago
looks like he done that before...get a real car with a real motor you wouldnt have to worry bout that
jamesdalrymple79 10 hours ago
So where's the rest ?? I wanna see him toss every cam retainer inside a big plastic container then mix&match them as he re-installs everything, would do a good video hearing the cam lobes beeing chewed to bits..
daver18qc 11 hours ago
man knows his shit
LegitVenom 17 hours ago
Run it, blow it, fix it, and F*%& the world hahaha nice
seri267 20 hours ago
sweet job bro,knowing your machine is all the diff, between fucked on the side of the road and making it home.
XxXL3AcHeRsXxX 1 day ago
were cam bolts missing or am i tripping.
nicksturboz 1 day ago
Did he pull the spark plug leads while his pos was still on?
SleepnGrunt 1 day ago
No wonder it blew, probably did this before with a cooked engine. Doesn't loosen bolts in a sequence or anything. Doubt he torques to spec either
SleepnGrunt 1 day ago 2
i don´t even know how to change a tire XD
Dalckiel 1 day ago
i think he just wanted to show of....... lmao jk
89foxbodysam 1 day ago
I see someone disassembling an engine frantically...not something mechanically special.
LookItsRiceCake 1 day ago
wow, aside from the car's exterior being a tad.. rice... sorry... it is... this is very impressive.
4x108Dtec 1 day ago
Like A Boss!
sideshow45 1 day ago
ah you burned the rice
alpinemustang 1 day ago
who the hell carries a full toolbox and tools with their car?
xabcx 2 days ago 2
@xabcx Honda drivers do :p
Dirkxke 2 days ago 2
He's probably a Theif!!!
MegaMarshal 4 days ago
@MegaMarshal
Because being able to fix cars on the spot means you're a thief. Get some goddamn common sense.
zanuha 3 days ago
@zanuha r u retarded? a thief doesnt even no how 2 do a head gasket. all they no is popin ur ignition n stealin the whole car. y would a theif know how 2 change a headgasket? retards
htowngoonies 3 days ago
@htowngoonies
GodDAMN, you're stupid. Get a dictionary and look up sarcasm.
zanuha 3 days ago
hes a bad lil dewd!! mad respect!!
nootherrehtoon69 4 days ago
some gangstaa stuff
TheDrizen 4 days ago
Non vtec. BARFFF!!!! lol just kidding. The b18b is still a great engine.
mmdaniels33 4 days ago
@mmdaniels33 b18b does have vtec :}
MIGHTYSAMINYOURFACE 4 days ago
now that is a hollister man.
Iowaman321 5 days ago
now that is a hollister man.
Iowaman321 5 days ago
Im like that dude, I get shit done !!!
HistoryHmoobGuy 5 days ago
Badass, and true passion for the automobile
StormTecify 5 days ago
if you care about your car, you just dont do that shit like that.... It would be like building a motor in your driveway or at your local mc donalds parking lot.
KaLo4G63 6 days ago
@KaLo4G63 not exactly. the longer you leave it, the worse it'll get
poslamas 5 days ago
oh come on.. you just dont do it that way...you really think he brough feeler gauges with him? just in case he has to check for a straight edge? lol and even if he puts the head gasket on for a ''quick fix'' its just stupid in my opinion... because the head gasket itself is about the same price as getting the car towed. so why would you bother puting a temporary head gasket? not worth the trouble at all... He only got his hands dirty cause he had the crowd there to watch him be a ''gearhead''
KaLo4G63 6 days ago
What the hell lol, you cant just change the head gasket like that on the spot, first of all the head is probably warped so its needs to be shaved. second, why the hells is he taking off the camshafts?? this guy probably never changed a head gasket properly, and thats why it blew.
KaLo4G63 6 days ago
what if the head bolts streched a bit and lifted the head up that does happen and if he has a good strait edge he can check for warpage
ryanthomaschristophe 6 days ago
@KaLo4G63 He's taking off the cams so he can tilt them forward to get the timing belt off so he can lift the head. I think he's doing a quick fix so he can drive it to the shop to do it properly which is why he's not milling.
CarefullySleek 6 days ago
I guess he blows headgaskets all the time he seems well prepared for it. MAYBE HE SHOULD LEARN HOW TO DO IT RIGHT THE FIRST TIME.
ladygodia 6 days ago
head will be warped 4 sure
BUZDRIFT 6 days ago
Yep all integra's are good for, bug bombs...
MrTpengineer 1 week ago
When u drive an old car you should always atleast carry some tools with you. I always carry a small toolkit on my 94 mustang gt trunk cuz well its a ford lolstang and it might break down anytime. If this happened to me i would have prolly attempted to do it on the spot also since a 5.0 is so easy to work on.
cubano1389 1 week ago
@cubano1389 302 with a eec 4 ignition? if it is better carry the ignition module with you too...
shoprat17 5 days ago
@shoprat17 Lol now that you say that, my car has been having problems lately and it just randomly leaves me on the side of the road, i already changed TFI module, Coil and the pickup coil, basically every ignition part is new and it did it again so wtf, i think either my ECM is toast or i got a fuel pump thats going out. Its hard to explain how it would stall but it did not seem like fuel pump problems and more like spark fading in and out so i started with ignition parts.
cubano1389 5 days ago
@cubano1389 Check the coolant temperature switch.....those things go bad some time and are often overlooked.
generalsir 3 days ago
yeah fuck caa
SarniaSteel 1 week ago
@SarniaSteel er in ur case aaa
SarniaSteel 1 week ago
Wow, brings tools and new gaskets, i winder if he got it dont on the spot.
burnoutking1971 1 week ago
LOL! He didn't even paint the door jams!
BeltDrivenMadness 1 week ago
now me and the mad scientist gotta tear apart the motor and replace the piston rings you fried haha just messing man props on being able to change the head gasket right on the spot!
Z3CHYD 1 week ago 21
@Z3CHYD lulz
BeltDrivenMadness 1 week ago
*their
ciscoh1 1 week ago
damn 383 would fix there car on the spot props!. 41 people sat there and cryed, pussys.
ciscoh1 1 week ago 14
all taken apart.....shit! i don't have a replacement gasket.....fail
MoparYEEEAH 1 week ago
Props but, nice hot air intake.
Skittlesking 1 week ago
props.... lol first high school kid ive seen with a two tone integra that can fix it....
daboss420edi 1 week ago
I'm not impressed...we dont even know if he finished tha job. I can take 20 bolts out on camera. The first thing to know is WHY the head gasket blew...waterpump, thermostat, maybe his head is warped. I love the "lets get it" attitude, but we dont even know the outcome of this, so i cant be to impressed with a video of a kid taking out some bolts...he very well may still be in that parking lot lol. - Your friendly neighborhood skeptic
vicmason25 1 week ago 3
Didn't even need to wait to fix it!
EriKBTV93 1 week ago
nice. done major to minor repairs in parking lots before. rebuilt truck engines in the bush before. kids got the right attitude. if it breaks dont cry and moan just fix it. of course if u have no knowledge of what your doing or needs to be done u call a hook but this should be a lesson to everyone. learn how to fix your ride
squishydafishy 1 week ago 2
kid really loves his car, i can understand. although with all those people there seeing if all my parts were still there would be more challenging
Reubzzda 1 week ago
Only issue is that you could really be opening a can of worms.There is the slight possibility that it also could be the head that is cracked or warped or even an issue with the water pump not pushing coolant to the block, and etc. and i'm not sure that everyone would want to carry a head gasket and a head around with them all the time. That's why i stick to diesels, i've seen a diesel with a blown hg being driven with no compression loss or overheating, even with a ml of oil it'd still run fine.
Andre609 1 week ago
LIKE A BOSS
Un4givScap3 1 week ago
1.Ride with your girl
2.blow a headgasket
3. Change it on the spot...& I Guarantee you'll get laid later.
xXHEELTOEXx 1 week ago 2
props, we could all learn something from his attitude. well i know i could. lol
5Gears3Pedals1Line 1 week ago
hes pissed you can see that ive pulled cars apart in that state of mind and all you have on your mind at the time is fix it and fix it fast
thunderbird948 1 week ago
All you computer geek mechs don't know shite about wrenching. If he knows the engine this could be a quick job and RTV will get him home. I've gotten the head off a 4 popper in 30 mins. He had a battery powered impact wrench. That saves a ton of time. If he gets the head lifted a bit, he could get the RTV on there, then put it all back in an hour or three. He didn't need any time for studying the manual. Just work. Props to him. Knows his car.
jwm987654321 1 week ago 2
so did he fix it or what
DMB169 1 week ago
straight edgeee
cokebub3 1 week ago
All that mechanical knowledge and he still buys a pos 4banger
Justletmepostok 1 week ago
to the laughing backround:"go wear your 1000$ suit and your glasses,and do your pc job''
stathis56 1 week ago
for once the pontiac wasnt the one with the blown head gasket
1500pantera 1 week ago
he loves his car
dandi20009 1 week ago
god the idiots laughing in the background are so annoying
nophobia123 1 week ago
LIKE A BOSS!
wolfprince7777 1 week ago
those are some ugly rims, but he is my hero
IllTakeyoufromadig 1 week ago
cool...
Nelis1992 1 week ago
now me and the mad scientist gotta rip apart the block, and replace the piston rings you fried!
HYLUXE 1 week ago
rice is done!
kenny150r 1 week ago
holy shit! mad props but damn coulda waited for it to cool down!?
definite757 2 weeks ago
dude mad props i lived in fairbanks,AK and this happend to my lil suzuki x90 i always carried extra gaskets collant and other bs cause at -20 shit like this happens its a shity cold situation so mad props
AKAboner 2 weeks ago
ignooooore the trollll
anyone who is an actual car enthusiast doesn't say stupid shit like that.
jalriteythen 2 weeks ago
seems like this isn't the first time this happened to him... lol he probably has back up parts in the back. hahahah
h0354y 2 weeks ago
Should have bought a V8 kid. Here's your proof that all rice burners are shit boxes! You have a tool kit and spare parts in the back 24-7.
70zboy 2 weeks ago
@70zboy Are you seriously suggesting v8's are more reliable than hondas?
Scholars22 2 weeks ago
@70zboy one video of a blown gasket is proof that all japanese motors suck? Your life must be very simple eh?
Ponkiizz 2 weeks ago 2
@Ponkiizz the kids an idiot ig thats why the 4 cyl toyota motors re considered the most reliable motors ever built?
methtweaker23 2 weeks ago
@70zboy Could a V-8 take +35 PSI of boost? I'm not hating on V-8's...I love 'em but i hate assholes like you.
ilikestuff6619 2 weeks ago
Head gasket is like 5hrs but theres ways around shit to cut time i got the head off my honda in like 3hrs which was my first time bet could happen faster ppl think it takes forever it really dont....had heads off my 5.0 in 3.5hrs...
red5liter 2 weeks ago
I'd probably drive home first before I start removing everything. lol. Most of the time a headgasket job is a 2 day job. I have done it in one day, but that's only if you work non-stop.
LordLo 2 weeks ago
@LordLo i wouldnt say a whole day. ive done head gaskets in a 5-6 hour range at work...if you are familiar with a car which this guy obviously is since its his, then you should do it with no problem. the biggest pain is having enough room to move around everything. but tegs have sooo much room.
PbEvilStump 2 weeks ago
I honestly cannot stand reading some of these god damn comments. RTV all day. They actually DO INFACT MAKE cordless battery powered drills with high enough torque to remove wheel nuts let alone some cam brackets. It's as if you're not infact sitting infront of a computer. Its as if you all deliberately say things, knowing you're wrong when you can clearly use a search engine on the computer, YOURE FUCKING SITTING INFRONT OF. He's burning coolant. A proper application of RTV will get him home
MIKECORTI 2 weeks ago
@MIKECORTI uhhhhhh RTV? I think you've been sniffing the stuff or something. RTV will NOT fix a blown head gasket.
EricHayward 2 weeks ago
@EricHayward Depends on the location in which it's blown. And again I'm not suggesting it will resolve the issue. If anything, again, it'd be a temporary solution given the correct circumstances, to get yourself to an area in which you can actually perform the correct procedure to fully resolve the issue. With that in mind, I've seen plenty of parking lot engine pulls and tranny swaps all over Audizine. Also I'm not implying the kid has any idea of what he's doing.
MIKECORTI 1 week ago
@bread996 now changing your stories read what you say before you post it go ahead and take that impact and replace those bolts tell me what happens hahahaha
wbazar 2 weeks ago
@Bread996 have you ever turned a wrench on a car you dont use an impact for shit like that know your shit before you say somthing
wbazar 2 weeks ago
@wbazar Yes, I use a 12v cordless impact driver to REMOVE nuts and bolts, which is exactly what he's doing...dumbass.
Furthermore, who drives around with a spare headgasket? He's a tool trying to show off. Blows the motor, immediately jumps out and grabs his tool kit to show how neat he is.
Bread996 2 weeks ago
What an idiot. I suspect he did it on purpose so he could show off his 'mechanic skillz'. Loosening bolts with a drill (not impact driver), which doesn't have enough torque to remove properly torqued bolts. They were clearly left loose for a reason. Why else drive around with all the tools required to do the repair?
Also love the way he yanks the wires out instead of pinching/pulling on the boots directly to prevent damage. Never buy a modded rice rocket!
Bread996 2 weeks ago
@Bread996 Those bolts don't get torqued down hard due to the aluminum head....but yeah it does look like he was expecting his car to take a shit any moment so he carried the tools with him.
mkluch 2 weeks ago
Love how he takes the bolts out like its no big deal to put them back in.... Stretch bolts....
ThaKillahB 2 weeks ago
Respect to him, i bet if it happened to anyone else there they would just b sittin there crying, this guy took it like a man and went to work
SunnyBoys2 2 weeks ago 52
@SunnyBoys2 what a beast lol thats how a man does it
connor4236 1 week ago
I love how he opens the hood from under the fender 0.16
axle001978 2 weeks ago in playlist More videos from arbachu
to do it right you have to get the head skimmed!
TG1986IRL 3 weeks ago
@TG1986IRL not necesseraly
Watchingtelevisian 2 weeks ago
you have to take off the cams to access the head bolts
MaddDogg81 3 weeks ago
Primer grey is my fav color
JAS357MAG 3 weeks ago
Why is he pulling the cams out to change a head gasket?
spartanbeta 3 weeks ago
@spartanbeta the head bolts set under the cams.
kcivicex 3 weeks ago
@TheLTXCamaro C.H.E.V.R.O.L.E.T. : Cracked Heads Every Valve Rattles Oil Leaks Engine Ticks
SAMCA3005 3 weeks ago
lmao man he blew a gasket because he doesnt tighten the bolts to his head to specifications haha!!!!!
1dirosa1 3 weeks ago
Nice work... very well prepared.
TimLenhartTech 3 weeks ago
the first kid with a multi colored integra wearing hollister t-shit that ACTUALLY knows how to turn a wrench! props!!!!!!!
streetracer4688 3 weeks ago 18
thats what you call tellent if you have the skills to change a head gasket in a car park
maketumk2 3 weeks ago
Your first mistake was buying a integra
Judas114 3 weeks ago
i wonder how mani gaskets hes got in stock ?
OvieTecEJ2 3 weeks ago
its not a GSR thats a LS valve cover
MadDogMahonie 4 weeks ago 5
please stop painting parts in your engine bay and paint your damn car. oh and new wheels please.
cstritz 1 month ago
@cstritz painting parts in the engine bay? How are you so sure that's not a gsr?
windywindy 4 weeks ago
no rice here.. blew head gasket and got to work on it asap.. like a boss
Hondaminican 1 month ago 81
@Hondaminican My thoughts exactly. There are ricers, and then there are guys like this who drive imports.
I respect this guy. Totally.
I've actually done something similar. Changed a timing chain in a SBC at the side of the road. Parts lined up on the curb kinda makes people do a double take....
cbiltcliffe 3 weeks ago
@Hondaminican i agree, he did what he had to do..
reminiz1 2 weeks ago
Like a bowss! :-)
ohdannyboy111 2 weeks ago
It may have still been cold, if he is the kind of dumbass that revs a car at start, I can see why it blew, and why he an lift it off.
Austinflank 1 month ago
he is so well prepped, that it's almost sad.
ckwan28 1 month ago
poor kid same shit happen to me and i pulled the head on the spot
praynker 1 month ago
0:36 The Fast and The Furious reference. haha
veyronman 1 month ago
dont think he torqued down those camshaft caps, they loosened too easily XD
MXJohnHMX1 1 month ago
lol well...i guess if u need 2 get home.
i wuda atleast kept the plug wires on the dizzy.
gonna cost you more for new camshaft, bearings and head resurfaced, shuda just waited til it cooled.
codyh1990 1 month ago
warped head!!! what a tard and those head bolts didn't seem like they were even torqued down!
2k5dodgesrt4 1 month ago
@2k5dodgesrt4 those wernt even the head bolts you have to pull the cams out before you can even see the head bolts lol
AustinMcFarlane 4 weeks ago
@AustinMcFarlane haha i know i wasn't really thinking i was drunk when i watched this. i have my motor tore completely down right now so i know what it takes to get the head off.
2k5dodgesrt4 4 weeks ago
@AustinMcFarlane and in my defence he was in the process of taking the head off because at the end he is undoing the cam caps so yea..
2k5dodgesrt4 4 weeks ago
@2k5dodgesrt4 The head bolts wernt even presnt in this video how do you kno there wernt torqued
anthonynumber12 1 week ago
@anthonynumber12 Didn't look like he even has a torque wrench in there. And the reason it's leaking is probably because it wasn't properly torqued from the last time he did it, considering that that's a pretty clean, new looking engine.
AreThereNoMoreNames 1 week ago
@AreThereNoMoreNames yea, i honestly dont even remember my comment ur replying to tho. but yea that can defently cause problems if u dont torque it down 2 spec
anthonynumber12 1 week ago
true fucking acura/honda owner. what a boss
KeepItBRUTAL1 1 month ago
I don't know a lot about cars but don't you need specific torque and new bolts when putting it all back together?
7stefan7vn 1 month ago 3
@7stefan7vn right-o
jet62095 1 month ago
@7stefan7vn Why do you think the head gasket keeps blowing lol
PsykoWaffle 1 month ago 4
This has been flagged as spam show
@7stefan7vn Why do you think his head gasket keeps blowing.
PsykoWaffle 1 month ago
buy a chevy! blowing a gasket is from detonation meaning overheating. pure dumbass
TheLTXCamaro 1 month ago
@TheLTXCamaro love chevy i hade one minor problem on one of my chevy cameros i was a spark plug lmao chevy are best cars in america
jon204 1 month ago
@jon204 you never owned a camaro because if you did you would know how to spell Camaro lmfao!
TheLTXCamaro 1 month ago
@TheLTXCamaro hahaha my cell phone did that it changed what i typed i can spell
jon204 1 month ago
@jon204 haha ok no worries bro!
TheLTXCamaro 1 month ago
gotta give him props. im sure he knows this car inside and out! im sure he did all the work too!! nice job!
BLACKNAPKIN41 1 month ago
Keeps a power drill and everything ready because his ricer breaks down so much :D
NoahCinema 1 month ago 2
@NoahCinema i wouldnt say that, remeber most ricers dont know anything about how cars work nor repair them *exceptions being stuff like oil changes, air filter, very basic stuff* this kid clearly knows his car inside and out. he might be a ricer but if he is he's a 3 on a scale of 1 - 10 ,,, 10 being the worst ricer possible.
R3APER50 1 month ago in playlist More videos from arbachu
@NoahCinema if he was a ricer he wouldnt have all the tools he did nd he certainly wouldnt have known how to fix it
DOMINICKA23 1 month ago
Dude I respect you for fixing your cars problem on the spot that shows integraty. Plus you got balls not to trust any shade tree machince to fix it for yea.
psementalist 1 month ago
@psementalist probably the reason it blew up in the first place...
rxheaven13b 1 month ago
@rxheaven13b LOL Yea I could see that but it makes you wonder who has all those tools in there car?
psementalist 1 month ago
Damn, you do this often? LOL
Tigerlui531 1 month ago 3
This has been flagged as spam show
Warped valve cover, warped cams, prob used the same valve cover gasket, prob used the same cylinder head bolts, and prob didnt torque the bolts down to OEM Specs!
No wonder he's done this multiple times...
nextpropaintballer 1 month ago
Comment removed
nextpropaintballer 1 month ago
guy should really just take that engine to a shop to get rebuilt. since it seems he does this so much.
simrash20001 1 month ago
Guys, Leave your wife and children. Gather 'round. There is something that must be fixed.
halflife103 1 month ago 4
i take my hat off to him. beter than paying 1k for some shitty mechanic that looses bolts to do it.
warfl4g 1 month ago
who carries that many tools around with them?!
Legotruck82 1 month ago
@Legotruck82 a guy whose import routinely breaks down apparently..lol
metvelle 1 month ago
@Legotruck82 plenty of people carry a tool box in the car.
you can do a lot with a decent ratchet set
fleetwoodsucks 1 month ago
@Legotruck82 my father! the best mechanic, 1 of his past cars ltd crown vic had every tool you'll ever need to air compressors, air guns, electricity (actual outlets) and the best sound system. his car was crammed pack in the trunk with tools! and his car was a beast! the engine was so clean, it was a nice white color with the white wall wheels omg i loved that shit. every part in the engine bay was clean enough to eat off. and he used to just see someone broke down and pull up and fix that shit
hanzbe420 3 weeks ago
@Legotruck82 now he has a caravan same amount of tools and shit!
hanzbe420 3 weeks ago
thats fuckn crazy....
punnkypo 1 month ago
no offense but I think this guy must be on crack to try to do that on spot
vontristan19 1 month ago
its a ricey + nigga mobile .
brianv3ntura 1 month ago
He doesn't even have all the cam bracket bolts.
namelesscrx 1 month ago
What was he trying to do?!
iammrprince 1 month ago
is this a toy car...the parts just come off like legos...lol...
Nitrogen6669 1 month ago
EXPERT LEVEL 10!
GBMairsoft 1 month ago
If he has had to do this more than once, he is torquing the heads down improperly.
yynnmmbb 1 month ago
I gotta say.....this was pretty impressive. I want to see the rest of this though.
RoC1909 1 month ago