as you have so many viewers, perhaps you could put in the "info" section for the clip WHY you chose the vox over any other one you may have tested before you got it, and WHICH ones you tried out.
Great tone range. I have a Valvetronix AD60VT amp and I am very happy with it. To me, valves will always make the difference, at least for a while, but it is a great amp for the price and it seems the Tonelab does pretty much the same. I am getting one of these soon.
Hi, good work....a question...which is the best way to amplificate this tonelab...??.a keyboard amp, monitors, fx loop of any guitar amp....??, im very confused about that....how do you do it?
Can you put drive up on the amp though and use the virtual amp's drive with the compressor pedal? Good work on this video, shame you didn't mic it up though cause otherwise it's great work, keep it up.
It's good, but it has a problem. The Vox Wah is not in the MOD patch, it's in the Gain pedals patch, so you cannot combine the Wah with an Overdrive, AND THAT SUCKS
Just add some drive on the amp instead of with an OD pedal and it will work just as good. Or you can place a wha pedal before the Tonelab, or in the effect loop. That is how I do.
yea I have my own wah and wouldn't use the wah on a board like this anyway . I would use the pedal for overall volume control and or something else , you need your own specific wah box imo regardless . Thats one effect that demands its own box it seems to me .
i hope i answer your question corretly but that isnt true to be able to customize your wah with distortion is to for example go to the wah seyying and press write twice then go to the distortion of your choice and press write twice and there you go.
Very nice demo. The tonelab has a very nice wah by the sounds it. I hate the wah on my gt-8. Seems like there's only two sounds sometimes, open or shut.
I thought so too at first. Did you adjust the 'frequency' setting and the 'peak' setting. They work together. If you play correctly with both, you will get an amazing wah sound. Also, the type of pickups you use will drammaticaly affect the wah effect.
Hi. i am searching for a pedalboard and when i saw your video i noticed that there is no delay between changing presets?! am i right or is there delay before your next sound is activated?
Some of theses are the ones that came with the tonelab.The first one is the SRV preset, the second one is called pedlverb I think and tha third is AC lead. The rest are the plexe amp model pushed with a tubescreamer, and another marshall model with the treble boost.
nice convinving real life demo.., thanks
as you have so many viewers, perhaps you could put in the "info" section for the clip WHY you chose the vox over any other one you may have tested before you got it, and WHICH ones you tried out.
regards
gregorheinrich 2 years ago 3
awesome playing, where those standard patches or custom?
wellurs 2 years ago 3
heey.. what kind of guitar is thaat??.. is fender stratocaster standard??
nice daay dude
zoomjoseth 2 years ago
Hiya, could you please tell me what the setting was you used on the second segmant to get that sound. Thanks
Supercell08 2 years ago 2
Hey
How's the Mackie SRM 150 with the low volume, how's the bass?
Thanks
Jhaakri 3 years ago
the comp is kinda useless. trust me
3eyedkalmah 3 years ago
Great tone range. I have a Valvetronix AD60VT amp and I am very happy with it. To me, valves will always make the difference, at least for a while, but it is a great amp for the price and it seems the Tonelab does pretty much the same. I am getting one of these soon.
newpixeldude 3 years ago
Did you used tonelab at your other vides too?
And how you compare tonelab with analog setup? Does valve really makes difference?
cihancil 3 years ago
Hi, good work....a question...which is the best way to amplificate this tonelab...??.a keyboard amp, monitors, fx loop of any guitar amp....??, im very confused about that....how do you do it?
Thanks for your answers!
pcorrea7 3 years ago
I wish I wasn't so lazy. I just bought one of these and I can't get a decent tone out of it. Aaaaaaghhh.
TheBeeste 3 years ago
This has been flagged as spam show
give it to me.
Activethrasher00 3 years ago 2
You cannot run a comp and overdrive at the same time.
SrulyWeinstein 3 years ago
Can you put drive up on the amp though and use the virtual amp's drive with the compressor pedal? Good work on this video, shame you didn't mic it up though cause otherwise it's great work, keep it up.
davedaape 3 years ago
This comment has received too many negative votes show
You should buy single pedals instead of those crappy boards!!
dalle211 4 years ago
very very good processor. i will sell my analog pedals for buy this product.
reign1313 4 years ago
It's good, but it has a problem. The Vox Wah is not in the MOD patch, it's in the Gain pedals patch, so you cannot combine the Wah with an Overdrive, AND THAT SUCKS
waynegacy666 4 years ago
Just add some drive on the amp instead of with an OD pedal and it will work just as good. Or you can place a wha pedal before the Tonelab, or in the effect loop. That is how I do.
cubeguitarist 3 years ago
yea I have my own wah and wouldn't use the wah on a board like this anyway . I would use the pedal for overall volume control and or something else , you need your own specific wah box imo regardless . Thats one effect that demands its own box it seems to me .
5ptCALVIN 3 years ago
i hope i answer your question corretly but that isnt true to be able to customize your wah with distortion is to for example go to the wah seyying and press write twice then go to the distortion of your choice and press write twice and there you go.
guitarista1988 3 years ago
Thanks man, I'll try it. I thought I spent 400 euros for nothing
waynegacy666 3 years ago
What is the stand under your Mackie?
Does it have a tilt & raise?
jasonlepisto 4 years ago
Very nice demo. The tonelab has a very nice wah by the sounds it. I hate the wah on my gt-8. Seems like there's only two sounds sometimes, open or shut.
gonefishing101 4 years ago
I thought so too at first. Did you adjust the 'frequency' setting and the 'peak' setting. They work together. If you play correctly with both, you will get an amazing wah sound. Also, the type of pickups you use will drammaticaly affect the wah effect.
mikefrenette 3 years ago
Hi. i am searching for a pedalboard and when i saw your video i noticed that there is no delay between changing presets?! am i right or is there delay before your next sound is activated?
evarian 4 years ago
The LE Unit sounds great..
It helps quite a bit to hear it demo-ed by a good player ..
Odiculeoj 4 years ago
NIce man. Just got the LE myself. ITs sweet but im just using the presets. They are ok.
Where are you finding good patches?
SBPStudio 4 years ago
Some of theses are the ones that came with the tonelab.The first one is the SRV preset, the second one is called pedlverb I think and tha third is AC lead. The rest are the plexe amp model pushed with a tubescreamer, and another marshall model with the treble boost.
SrulyWeinstein 4 years ago
whoa! first of all-didnt know this was up (AHEM!) second- @ 31 seconds is really nice... nice vid looks like u had fun with the diff sounds
Musicobsesser06 4 years ago
awesome demo for the tonelab! they should use you for their advertisement!
tjdstuffit2 4 years ago
Thats a Mackie SRM 150 and the tonelab is straight into the mackie.
SrulyWeinstein 4 years ago
Sweet sounds
What kind of PA is that, nice size? Is the VTLE connected straight into it? Is there a mixer, amplifier invloved in the scene.
Jhaakri 4 years ago