...love the wire connections: bare wires wrapped around each other. Ever hear of solder and heat shrink tube? Or even the Afro-engineered crimp connectors? I'm watching this looking for something, ANYTHING useful and...here we go! He's gonna demo it! Ready? Bummer! He has to ignite it w/a match. Then it's turned on. No change other than the flame flutters. The buffonery is outstanding, though. Keep up the good...never mind...
I have been blocked by "revizal". This guy thinks by screwing in the idle mixture screw on a Briggs engine, you can run it w/o gas using his added-on doo-dads. Whatever you people do, do NOT invest any money with these cons. Just like the guy w/the "water to gas" pills. Gets a grizzled old prospectors canteen of "water" and drops a magic pill in it. Suddenly, it's gas! The miner was a plant in the crowd with a canteen already holding gas in it. Don't fall for these guys B.S.
You are partially igniting fuel inside the tube, which of course causes the 'whoosh' that we all see, spreading out the flame ... the vapors that come out of the exhaust pipe are now partially burned, and the missing soot you mentioned just means you are burning it more efficiently. So until you do a spectral analysis to prove me wrong, you're just doing a better burn. Good experiment tho.
Great Video! Cool stuff your doing!! Good luck!! I've been thinking about employing a gasoline vaporizer and a plazma ignition coil on my generator to get a longer run time!
This has got to be one of the most dangerous experiments I have ever seen.
If the fuel/air mixture from your bubbler hits between the UEL/LEL (1.4% to 7.6%) vapor vol/ air vol , the flame front will flash back to the bubbler blowing the bubbler apart with raw flaming gasoline all over you and the room.
Please read up on these references and flame arresters .
exp and imp lotion? Hydrogen enrichment??? Well....at least you have a very creative imagination. what a mess of wires and junk. Couldn't even afford a decent light switch or even a 2x4 or plywood square to organize that mess.
Did you know that if you add 2 cups of sugar to your oil it will improve your gas milage by 100% ?? This is because most japanese and american cars have a faulty diabetic converter after being driven only 700 miles on low octane fuel. This trick works every time and is gaurenteed to make the engine seize, to have this problem, follow the directions !!
When you apply the plasma to the vapour you are igniting the vapour in the tube and so you will get an implosion effect. This is a good demo, but be carefull you do not get a back flash. The plasma is producing hydrogen from the hydrocarbon fuel and burning it at the end of the tube where it has oxygen to burn. Hydrogen will not burn without an oxident. Keep up the good work, but be carefull.
Thank you Ozicell. I think if we could maintain frequency, keep the plug gap (about 5 mm) and add more vapour into the plasma system, we could get more powerfull flame that mean more efficiency of a combustion.
if your looking for steam put 120v dc on a spark plug and put it in distilled water with alot of baking soda. try both polarities one is better thatn the other.
...love the wire connections: bare wires wrapped around each other. Ever hear of solder and heat shrink tube? Or even the Afro-engineered crimp connectors? I'm watching this looking for something, ANYTHING useful and...here we go! He's gonna demo it! Ready? Bummer! He has to ignite it w/a match. Then it's turned on. No change other than the flame flutters. The buffonery is outstanding, though. Keep up the good...never mind...
47485ksc 4 days ago
I have been blocked by "revizal". This guy thinks by screwing in the idle mixture screw on a Briggs engine, you can run it w/o gas using his added-on doo-dads. Whatever you people do, do NOT invest any money with these cons. Just like the guy w/the "water to gas" pills. Gets a grizzled old prospectors canteen of "water" and drops a magic pill in it. Suddenly, it's gas! The miner was a plant in the crowd with a canteen already holding gas in it. Don't fall for these guys B.S.
47485ksc 6 days ago
i have no idear what i just watched but it sounded mean!
aloberb 2 months ago
You are partially igniting fuel inside the tube, which of course causes the 'whoosh' that we all see, spreading out the flame ... the vapors that come out of the exhaust pipe are now partially burned, and the missing soot you mentioned just means you are burning it more efficiently. So until you do a spectral analysis to prove me wrong, you're just doing a better burn. Good experiment tho.
raptor731 3 months ago
Comment removed
raptor731 3 months ago
Comment removed
raptor731 3 months ago
Comment removed
raptor731 3 months ago
Very interesting.
mindthoughts1974 4 months ago
This has been flagged as spam show
would it make a difference if you pressurized the vapor?
xxkittenkiller 4 months ago
Great Video! Cool stuff your doing!! Good luck!! I've been thinking about employing a gasoline vaporizer and a plazma ignition coil on my generator to get a longer run time!
123frederikt 5 months ago
wtf? you basically have that spark dispace some air, and that blows our the flame or something...
JOBGG16 6 months ago
This has been flagged as spam show
This has got to be one of the most dangerous experiments I have ever seen.
If the fuel/air mixture from your bubbler hits between the UEL/LEL (1.4% to 7.6%) vapor vol/ air vol , the flame front will flash back to the bubbler blowing the bubbler apart with raw flaming gasoline all over you and the room.
Please read up on these references and flame arresters .
"wikipedia(dot)org/wiki/Flammability_limit".
sparkyy0007 7 months ago
exp and imp lotion? Hydrogen enrichment??? Well....at least you have a very creative imagination. what a mess of wires and junk. Couldn't even afford a decent light switch or even a 2x4 or plywood square to organize that mess.
UpcomingJedi 8 months ago
plasma effect my ass...
you have no clue what science calls plasma effect.
masster64 10 months ago
so like... a gas powered taser
zombieX111222333 11 months ago
Did you know that if you add 2 cups of sugar to your oil it will improve your gas milage by 100% ?? This is because most japanese and american cars have a faulty diabetic converter after being driven only 700 miles on low octane fuel. This trick works every time and is gaurenteed to make the engine seize, to have this problem, follow the directions !!
mrbooziebrews 1 year ago 3
hola revizal : muy bueno me gustaria saber si puedes detallarme como construir tu encendido de plasma . desde ya gracias.
aaries60 1 year ago
I must have missed this video somehow until now. Your imagination is king! I hope you continue with this line of thought!
aquapulsefuel 1 year ago
could me have a copy of the circut you build
robot797 1 year ago
could you send me the circuit for this?
teslanumbertwo 2 years ago
great job keep it up!
kinesisfilms 3 years ago
When you apply the plasma to the vapour you are igniting the vapour in the tube and so you will get an implosion effect. This is a good demo, but be carefull you do not get a back flash. The plasma is producing hydrogen from the hydrocarbon fuel and burning it at the end of the tube where it has oxygen to burn. Hydrogen will not burn without an oxident. Keep up the good work, but be carefull.
centraflow 3 years ago
you can prolly make a killer bong lmao
ak47attack 3 years ago
cool, do you observe black carbon puffs when using plasma?
crippled82 3 years ago
It was some soot on original gasoline vapour flame. When plasma spark on (at arc point) there is no visible soot at around the flame.
revizal 3 years ago
Rev, I love your work!
Cheers
Ozicell
ozicell 3 years ago
Thank you Ozicell. I think if we could maintain frequency, keep the plug gap (about 5 mm) and add more vapour into the plasma system, we could get more powerfull flame that mean more efficiency of a combustion.
revizal 3 years ago
if your looking for steam put 120v dc on a spark plug and put it in distilled water with alot of baking soda. try both polarities one is better thatn the other.
crob227 3 years ago
I ever done it, but the system didnot worked with water. I got only big loud explosion on water. Actually we need to crack it (water).
revizal 3 years ago