I totally agree Sir we need to take power companies out of the equation. If your only goal is to achieve wealth we will never progress. I am all for clean, free to the consumer energy and work on many of my own projects. I am currently in the process of making a website that all free energy researchers can get together in one spot. I have noticed that most designs have ALOT in common, if we all had a giant think tank I think we can finance and get something together the average homeowner canmake
wow i'm inspired by your professional approach to this. i've been researching magnetic motors, nikola tesla, and free energy concepts for the past few weeks. have you looked at the TORIAN III prototype from Argentina? Yours seems much more sophisticated but his appears to be functional. Not sure if it helps, but thought I'd mention. keep up the good work and i love the posts.
That is rude. I did not treat you that way. I asked you nicely and told you I would also help you advance your experiment well beyond your current level. I gave you my number in the spirit of good will to discuss like adults. You reply " choke on it:" hmmm.
I offered you schematics drawings and details as well as my expertise on the mater. all of you say good will to the earth but you can't extend even the simplest display of good faith. Sir if you are interested I will send to you.
@sparten1114 You asked me to CEASE showing my work. I do not care what it was in exchange for. I will not cease showing my work under ANY CIRCUMSTANCE! This is not open to negotiation and to even ASK me this is HUGELY INSULTING! Clearly, you have no idea who I am or what I stand for. You will once you see my next video.
@ZeroFossilFuel ello Sir I am working on a some of my own motors mainly bedini circuits. What kind of results have you achieved? Are you gaining power? I know you are not creating it just utilizing energy available everywhere in the atmosphere. Thats what these people need to understand is that we are trying to find fuelless clean energy not create anything :)
the circuit will enable you to use any battery operated device. not just a motor. also we have patent on an ac version the gains 50% reduction in power consumption.
it is not the mags it is the back emf that give you the gain. with two battery banks one for supply one for charge then swap in real time. that is how you increase efficiency we gained an additional 70% increase in run time with a similar system. he has just about got it. The motor is a small part of the puzzle.
Hi zero, I really like what you are doing as in free energy and your motor tech is ingenious.. As I'm aware all the free energy devices are locked away in the evil mans volt never to see the light of day.. I can only dream of seeing free energy distributed throughout our once great world where we can all progress and prosper ! WISH I COULD HELP YOU IN SOME WAY... even if governments won't ? keep this vital work going.. WE NEED IT MORE THAN EVER !!!
@dontrachfski It's up to every individual to decide whether or not to make a stand against the machine. What I can tell you is "they" count on individuals being frightened. A few are easily silenced. Many are not. We are many. Stand with me.
"If we're not ready to sacrifice everything for what we believe in, then what
we believe in will perish. The meek shall NOT inherit the Earth. The brave
Good test, thanks for sharing your attempt and I hope it works for you. I've been looking into the Regenerative Acceleration Generator - a very similar concept which can be adapted to existing motors....
Make sure that it is the real RPM, I made the same mistake, you need to divide that RPM on the meter by the number of magnets. On my 2 foot Muller using 9 magnets, my RPM reading was 6387, but the true speed is 6387/ 9 = 709.67 true RPM.
You can make it. Understand that high RPM is one of the keys to make the machine work. Extracting the energy, when the magnet is approaching is another key, because repulsion causes much less drag in the system than attraction.
It is Inventors like you who come up with planet changing (in this case planet saving) technologies in their garages and sheds (eg. the Wright Brothers) who are the real heroes.
First of all, you must use the same parts as RomeroUK did in order to expect the same results. What people are not aware of is that the Muller Dynamo is NOT the same as RomeroUK's replication. he used different parts. If Muller had a self runner, I am so sorry I missed it! LOL
Very cool and great work. What I wonder is the durability of the bearings. Would be nice if bearing replacement was easy here too because for a device like this to work well, ease of repair, if needed, would be a benefit. Probably not possible to put the bearings on the outside though. Also, with the heat generated, need a way to dissipate - heat sink of some sort on the shaft coudl work, but what if the shaft was hollow? Water cooled, pumped through shaft could work.
Zero reconfigured device so the 2 sets of bearings ARE on the outside supports and not on the rotor. Else, he could not have spun up the rotor with his Dremyl tool on the shaft. Heat was not a problem at 4,000 RPMs. Rotor should create a fair amount of cooling air circulation. Same concept works well for bicycles. They bear greater weight @ lower RPMs. =No doubt you have coolant flowing through the axles of your bicycle?
Wow, nice work. I wonder if you would want to include a non-invasive thermometer on the bearings of the shaft - at these RPM's temp might warn of an impending failure that COULD cause injury, This is GREAT, thank you.
one question, you will be using 2 coils to spin and 17 to collect? so the driver coils and collectors could be diferent right? what voltage and current (w) are thoose 2 coils using right now? I wonder if a low rpm wind mill would be enought to start it
Nice work like always! Been waiting to see this video!! Haven't done any research on these motors, but by the looks of it, adding the rest of the coils your going to get massive rpm out of that thing!!! Be safe with it man!!
Very nice Zero as always. On the coils, I expected the large wind side to be near the rotor. One way to check the field dispersion would be to lay each coil , energized , under a piece of paper with iron filings on it. Now you should see the flux field pattern and then be able to compare the pattern to the coil with the best performance. An inexpensive test but one that has merit IMHO. Keep up the great work.
Hi ZFF, with such high rpm are you using some type of dry film lubricant on the bearings? Those bearing seem kind of small in relationship to the size and weight of the stator...next time you fire it up could you possibly check the temp on the bearings and let us know ?
@keykhin Why don't you come over to overunity(dot)com and join the discussion. Look for the Muller dynamo thread. Come and introduce your ideas, it would be great to have more experienced EE working together on this.
@WaxingRadiance I am on overunitydotcom, I post some coil driving and dc to dc converter circuits but nobody seems to be interested. Overunitydotcom seems a club I ain't in it. I'm an electronist technician and I have over 20 years in designing professional circuits. It's frustrating when you want to help people with professional circuits and got ignorance for change. So I choose to stay at low profile and who is interested, just contact me in private.
@WaxingRadiance That will make a difference between people just fooling around, lurking MFSOB's who steal people's work and rush to patent office, MIB's and true free energy researchers.
Check out my Stardrive unit, I put some test points from Mouser on it, they are teflon with gold stabs that are .080 I.D. and let you plug standard meter probes into them, or .080 wire, the first tip of the unibit is the perfect size for the hole for a press fit, just a sugestion.
I am puzzled by your Muller coil. It would seem to me that you would want the side with more winds closer to the magnets? Maybee I need to go back and look at Mullers setup, I might have been testing it wrong.
Love the ending speech, very well said. Noticed your connecting bolts and shaft. Some say it is better to use as little magnetic material around your magnet wheel as possible, to eliminate any or most of the interference. Using nylon or brass bolts for most of the assembly. Just an observation. Thanx for sharing :)
Good explanation...This will help a lot....
If you want to know more...
Go to Google......
In the Search box type "Best Magnetic Generator Review"
You have to select the First result (Skip the Advertisements)
devidjonson8989 1 month ago 4
I totally agree Sir we need to take power companies out of the equation. If your only goal is to achieve wealth we will never progress. I am all for clean, free to the consumer energy and work on many of my own projects. I am currently in the process of making a website that all free energy researchers can get together in one spot. I have noticed that most designs have ALOT in common, if we all had a giant think tank I think we can finance and get something together the average homeowner canmake
acrophobia123 2 months ago
wow i'm inspired by your professional approach to this. i've been researching magnetic motors, nikola tesla, and free energy concepts for the past few weeks. have you looked at the TORIAN III prototype from Argentina? Yours seems much more sophisticated but his appears to be functional. Not sure if it helps, but thought I'd mention. keep up the good work and i love the posts.
mikesmullin 5 months ago in playlist alt-nrg feature
That is rude. I did not treat you that way. I asked you nicely and told you I would also help you advance your experiment well beyond your current level. I gave you my number in the spirit of good will to discuss like adults. You reply " choke on it:" hmmm.
I offered you schematics drawings and details as well as my expertise on the mater. all of you say good will to the earth but you can't extend even the simplest display of good faith. Sir if you are interested I will send to you.
sparten1114 5 months ago
@sparten1114 You asked me to CEASE showing my work. I do not care what it was in exchange for. I will not cease showing my work under ANY CIRCUMSTANCE! This is not open to negotiation and to even ASK me this is HUGELY INSULTING! Clearly, you have no idea who I am or what I stand for. You will once you see my next video.
Have a sparkling day! :-D
ZeroFossilFuel 5 months ago
@ZeroFossilFuel ello Sir I am working on a some of my own motors mainly bedini circuits. What kind of results have you achieved? Are you gaining power? I know you are not creating it just utilizing energy available everywhere in the atmosphere. Thats what these people need to understand is that we are trying to find fuelless clean energy not create anything :)
acrophobia123 2 months ago
the circuit will enable you to use any battery operated device. not just a motor. also we have patent on an ac version the gains 50% reduction in power consumption.
sparten1114 5 months ago
it is not the mags it is the back emf that give you the gain. with two battery banks one for supply one for charge then swap in real time. that is how you increase efficiency we gained an additional 70% increase in run time with a similar system. he has just about got it. The motor is a small part of the puzzle.
sparten1114 5 months ago
we have a patent on this type of tech already. we are getting 70% increased efficancy
this was invented by Phil Wood of Australia over 5 years ago
sparten1114 5 months ago
@sparten1114 And WHERE IS IT NOW??? I am about to upload a video response to your earlier message, right up close and personal. Choke on it.
And to the rest of my audience, Peace and good will to all mankind.
ZeroFossilFuel 5 months ago
we have a patent on this type of tech already. we are getting 70% increased efficancy
sparten1114 5 months ago
we have a patent on this type of tech already.
sparten1114 5 months ago
Can someone tell me if this method is efficient? I gotta go right now but I'm really curious about this motor. Thanks
DerMaskenfrosch 6 months ago
How much of a load can these motors drive?
HardyTechnologies 6 months ago
Hi zero, I really like what you are doing as in free energy and your motor tech is ingenious.. As I'm aware all the free energy devices are locked away in the evil mans volt never to see the light of day.. I can only dream of seeing free energy distributed throughout our once great world where we can all progress and prosper ! WISH I COULD HELP YOU IN SOME WAY... even if governments won't ? keep this vital work going.. WE NEED IT MORE THAN EVER !!!
dontrachfski 7 months ago
@dontrachfski It's up to every individual to decide whether or not to make a stand against the machine. What I can tell you is "they" count on individuals being frightened. A few are easily silenced. Many are not. We are many. Stand with me.
"If we're not ready to sacrifice everything for what we believe in, then what
we believe in will perish. The meek shall NOT inherit the Earth. The brave
will." - Zero
ZeroFossilFuel 7 months ago
What happened to your left thumb?
bobbyadejo 8 months ago
@bobbyadejo Slip of an open end wrench while working on the lawn mower.
ZeroFossilFuel 8 months ago
You are truely a patriot of technology. You're my hero, man. Thanks for the work.
kevinisek2009 8 months ago
Good test, thanks for sharing your attempt and I hope it works for you. I've been looking into the Regenerative Acceleration Generator - a very similar concept which can be adapted to existing motors....
EletrikRidesAgain 9 months ago
Make sure that it is the real RPM, I made the same mistake, you need to divide that RPM on the meter by the number of magnets. On my 2 foot Muller using 9 magnets, my RPM reading was 6387, but the true speed is 6387/ 9 = 709.67 true RPM.
Richard
hhoforvolts 9 months ago
@hhoforvolts After listening to your motor's whine, your reading may be correct.
Richard
hhoforvolts 9 months ago
You can make it. Understand that high RPM is one of the keys to make the machine work. Extracting the energy, when the magnet is approaching is another key, because repulsion causes much less drag in the system than attraction.
My prays to you.
elias721 9 months ago
It is Inventors like you who come up with planet changing (in this case planet saving) technologies in their garages and sheds (eg. the Wright Brothers) who are the real heroes.
JamesF63 9 months ago
from about 5m20s it sounds like the start to the PC game Half-Life where everything went a bit .. different...
Great video... great series of videos :D
chipko 9 months ago
First of all, you must use the same parts as RomeroUK did in order to expect the same results. What people are not aware of is that the Muller Dynamo is NOT the same as RomeroUK's replication. he used different parts. If Muller had a self runner, I am so sorry I missed it! LOL
chessnyt 9 months ago
Very cool and great work. What I wonder is the durability of the bearings. Would be nice if bearing replacement was easy here too because for a device like this to work well, ease of repair, if needed, would be a benefit. Probably not possible to put the bearings on the outside though. Also, with the heat generated, need a way to dissipate - heat sink of some sort on the shaft coudl work, but what if the shaft was hollow? Water cooled, pumped through shaft could work.
topjimmy44 9 months ago
Comment removed
OgMandin0 9 months ago
@topjimmy44
Zero reconfigured device so the 2 sets of bearings ARE on the outside supports and not on the rotor. Else, he could not have spun up the rotor with his Dremyl tool on the shaft. Heat was not a problem at 4,000 RPMs. Rotor should create a fair amount of cooling air circulation. Same concept works well for bicycles. They bear greater weight @ lower RPMs. =No doubt you have coolant flowing through the axles of your bicycle?
OgMandin0 9 months ago
thnx for the update... lookin gd
beckzwayne 9 months ago
The initial spin up with it's own drive coil is smooth little vibration at 3500 rpm
I did'nt catch the input draw from the astron power supply. look forward to #283
mikrovolt 9 months ago
Wow, nice work. I wonder if you would want to include a non-invasive thermometer on the bearings of the shaft - at these RPM's temp might warn of an impending failure that COULD cause injury, This is GREAT, thank you.
K7SJA 9 months ago
I found out you can send zero a pay pal gift to zerofossilfuel at his gmail account.
joewilder 9 months ago
one question, you will be using 2 coils to spin and 17 to collect? so the driver coils and collectors could be diferent right? what voltage and current (w) are thoose 2 coils using right now? I wonder if a low rpm wind mill would be enought to start it
lbonavino 9 months ago
Nice work like always! Been waiting to see this video!! Haven't done any research on these motors, but by the looks of it, adding the rest of the coils your going to get massive rpm out of that thing!!! Be safe with it man!!
bigchad007 9 months ago
"we need clean energy and we need it right now."
One for the history books
ThisMansOpinion 9 months ago 5
Very nice Zero as always. On the coils, I expected the large wind side to be near the rotor. One way to check the field dispersion would be to lay each coil , energized , under a piece of paper with iron filings on it. Now you should see the flux field pattern and then be able to compare the pattern to the coil with the best performance. An inexpensive test but one that has merit IMHO. Keep up the great work.
LeaningGreen 9 months ago
Hi ZFF, with such high rpm are you using some type of dry film lubricant on the bearings? Those bearing seem kind of small in relationship to the size and weight of the stator...next time you fire it up could you possibly check the temp on the bearings and let us know ?
Keep up the great work!!!
electeknowizard 9 months ago
I can suggest a much better circuit to drive those nice coils. If you are interested, contact me in private.
keykhin 9 months ago
@keykhin Why don't you come over to overunity(dot)com and join the discussion. Look for the Muller dynamo thread. Come and introduce your ideas, it would be great to have more experienced EE working together on this.
WaxingRadiance 9 months ago
@WaxingRadiance I am on overunitydotcom, I post some coil driving and dc to dc converter circuits but nobody seems to be interested. Overunitydotcom seems a club I ain't in it. I'm an electronist technician and I have over 20 years in designing professional circuits. It's frustrating when you want to help people with professional circuits and got ignorance for change. So I choose to stay at low profile and who is interested, just contact me in private.
keykhin 9 months ago
@keykhin
Ps visit the energetic forum and repost your circuit
Lots of ways in the OU but in the E Forum most are easy to digest like Lidmotor has done
thanks
imtotob 9 months ago
Comment removed
keykhin 9 months ago
This has been flagged as spam show
@WaxingRadiance That will make a difference between people just fooling around, lurking MFSOB's who steal people's work and rush to patent office, MIB's and true free energy researchers.
keykhin 9 months ago
Keep up your great work! This project is very important for all of us. Greetings from Europe
obawanger 9 months ago
Nice Run Z , nice wind up on the RMP's.
Check out my Stardrive unit, I put some test points from Mouser on it, they are teflon with gold stabs that are .080 I.D. and let you plug standard meter probes into them, or .080 wire, the first tip of the unibit is the perfect size for the hole for a press fit, just a sugestion.
Gary
llewgnal 9 months ago
May thought on the step coil was to reduce cogging at the magnet rotor, why fewer turns at the rotor end. This correct?
Tahtech 9 months ago
have you heard of the mangi work generator
tlhcpuguy 9 months ago
I cant stop watching . the best is Yet to come . when is the next Live feed ?
uawwildbob 9 months ago
great job stay safe
wetsailer 9 months ago
Wow this thing is like a bedini on Crack.
Is it just me or does it look like this thing is the real deal?
Lukeidea 9 months ago 3
@Lukeidea Don't get too excited yet. All we've got so far is a very low torque pulse motor.
ZeroFossilFuel 9 months ago 2
@ZeroFossilFuel lol ok :p
Lukeidea 9 months ago
@ZeroFossilFuel Thank you for objectively demonstrating your findings and keeping a level head even in the face of success!
secretagentmann9 9 months ago
great work Zero, remember that the magnets can kill you....! be careful...!
skycollection 9 months ago
Outstanding!
abedanger 9 months ago
Soon we will know ;-)
DirkME1022 9 months ago
I am puzzled by your Muller coil. It would seem to me that you would want the side with more winds closer to the magnets? Maybee I need to go back and look at Mullers setup, I might have been testing it wrong.
marthale7 9 months ago
@marthale7 I am going to test that both ways also.
ZeroFossilFuel 9 months ago
Nice done Zero, keep it up!
InventorGadget 9 months ago
im wonder wich coils work better?
crafter2u 9 months ago
@crafter2u Me too. I'm also going to wind both styles in a bifilar configuration and test those too.
ZeroFossilFuel 9 months ago
respect
vomit55 9 months ago
great work..
samedsoft 9 months ago
Great job keep them videos comming get some coil results fast im sitting waitting before i wind :D
TedFnBuckle 9 months ago
looks great, can't wait for tests
thx 4 sharing
th86stone 9 months ago 2
lol i love watching this series, like how you just called your garage a "lab"
jennybn 9 months ago
thanks for the update. For a sec i thought you gave up :)
jozsab1 9 months ago
What is a Muller Motor ?
WulfBand 9 months ago
GOOD JOB...
530pools 9 months ago
Revolving Revolution
Love it!! can't thankyou enough,
Stay Safe
davidiom27 9 months ago
Excellent video, and great work...I'll be the first in line to buy such a system!
clbackus 9 months ago
Good job so far man, I'm tuned in for the long haul. Can't wait for more updates.
Marzec309 9 months ago
Love the ending speech, very well said. Noticed your connecting bolts and shaft. Some say it is better to use as little magnetic material around your magnet wheel as possible, to eliminate any or most of the interference. Using nylon or brass bolts for most of the assembly. Just an observation. Thanx for sharing :)
GuardianZeus21 9 months ago
Amazing workmanship. I am anxious to see the outcome. Thank you for your efforts.
0akak0 9 months ago
Outstanding work Z. Keep it up.
Larry
HHOPWR 9 months ago
hello, With the motor spinning up so fast. Is there any heat generated ?
ryukaibutsu 9 months ago