i have a similar problem. i turned off the transmitter before disconnecting the battery;
the heli went insane for a sec and the flybar even flew right off. now the bottom blades are out of track and i dont know how to correct it (the manual is very bad!). also, the bad tracking is not constant. it goes good-bad-good-bad, one cycle per second or so. making it impossible to hover! anyone got tips on that...?
Yes, you need to make sure that the stabilizer bar is straight. Disconnect it and check it. You can easily staighten it. If you are sure that the stabilizer bar is straight and still gives you the vibration, try switching the stabilizer bar from one side to the other. Also, THE EXTREME BLADES DO NOT FIX THE VIBRATION. You may also need to level your swashplate.
same thing happened to mine after i crashed it! i changed the blades, but it still has the same problem. also, my heli's nose tends to turn to the left, and I set the trim to full at right. can you please tell me how to fix this at the lowest price? PLEASE!!!
isn't A is the top and B is the bottom
TheCrazy135 1 year ago
that might be because you twisted a pin that helps it stay stabe
djlolypop 3 years ago
thanx, but i got the heli fixed about 5 months ago, lol.
jamiekenta 3 years ago
what exactly did you do to fix it becase i have the same exact problem
pyroman13524 3 years ago
u have to track the blades, or change the shafts.
jamiekenta 3 years ago
@pyroman13524 what did you do??? plz answer
punisher70000000 1 year ago
It's really better with the extreme blades!
nononono92 3 years ago
@nononono92 did u fix it? cuz i have the same problem
punisher70000000 1 year ago
he says he already changed the blades.
i have a similar problem. i turned off the transmitter before disconnecting the battery;
the heli went insane for a sec and the flybar even flew right off. now the bottom blades are out of track and i dont know how to correct it (the manual is very bad!). also, the bad tracking is not constant. it goes good-bad-good-bad, one cycle per second or so. making it impossible to hover! anyone got tips on that...?
DaDASHDevil 3 years ago
@DaDASHDevil what did u do to fix it?
punisher70000000 1 year ago
@punisher70000000 i didnt fix it... i didnt fly in a long time, i think u just need to replace the shaft or something.
DaDASHDevil 1 year ago
check the flybar if its still straight.then check the gears at the bottom of the chopper.
ice9fetus81 3 years ago
Yes, you need to make sure that the stabilizer bar is straight. Disconnect it and check it. You can easily staighten it. If you are sure that the stabilizer bar is straight and still gives you the vibration, try switching the stabilizer bar from one side to the other. Also, THE EXTREME BLADES DO NOT FIX THE VIBRATION. You may also need to level your swashplate.
EKPC1000 3 years ago
same thing happened to mine after i crashed it! i changed the blades, but it still has the same problem. also, my heli's nose tends to turn to the left, and I set the trim to full at right. can you please tell me how to fix this at the lowest price? PLEASE!!!
jamiekenta 3 years ago
I bought the Xtreme blades and there's no vibration anymore...
nononono92 4 years ago
well, have you leveled the flybar?
Niar15 4 years ago