Question: at what point, after graduating from Estes kits and designing bigger units, does the rocket need an actively self-adjusting guidance system to keep it flying vertically?
Now on the other hand, if you want a rocket that will fly perfectly straight horizontally, then a heading hold gyro and fast digital servo for each control axis would be a start.
I've just ordered a 25 kilo sack of KNO3, I've been reading up on the mixing of the 'rocket candy' and have some previous experience with smaller home made rockets. We don't have big areas of desert like this here in the UK but there are some wide open spaces - wish me luck !
a lot of crazy things happen to a rocket when it aprouches super sonic speeds or goes though the sound bearea frist theres a ring of pressure around the rocket just as it goes thru sound, if the tube is not strong enough it crushes the tube and that little wobble as its going up is caused by it hiting the sound beara its like its bumping into it if the motors fast enough it will pop thru the bearea if not it bounces off it a so call stall, but when you see that little wiggle its hit the breara
actually if you read carefully you will see that i didnt say you supported anything
i was sugesting terrorists were watching the video thats totally different then verbaly emplying that someone supports terrorism you are accusing me of a false statment
@youngmoneycash,a couple of notes. Don't speak from ignorance. The BATFE recently lost a lawsuit in Federal court to the National Association of Rocketry and the Tripoli rocketry association for arbitrarily restricting high powered rocketry fuels. The fact is, Ammonium Perchlorate Composite Propellant (APCP) is much more powerful and legally purchased for this purpose.
Another bit of info, Hamas has been making their own rockets for many years now. Don't be ignorant.
That sounded pretty kick arse! Seemed to have a radical flight path change half way. Im a science teacher and managed to burn my right hand with this stuff once. Luckily I didn't need the skin from my butt grafted to my hand, but it was a close call.
@szelle63 There is and it's a Federal one but the engine would have to be HUGE, almost capable of reaching space. Anything you can make in your garage is legal.
nice lounch guys i love the desert lots of room, i only have the AMA here to louch my rockets and there limited in size, is the out side of your rockey body PVC or card board caseing or alumunum, and how many pouns or grams of rocket fuel did you use in what size casting? thank you for posting the great video, David*
You'd never want to grind the oxidizer and the fuel together, they might ignite. It's simple, the kno3, sugar and corn syrup are heated together to lower the viscosity and then poured into the engine casing to cool. I wrote a book on how to make the engine, it's available on amazon, it's called K450 PVC Rocket Engine. Good luck.
Thanks! That's awesome, I'm glad you like the book. I'm currently writing one on the entire rocket construction, not just the engine. It will have instructions on the parachute piston, the apogee detector, fins, nosecone, engine....all of it. Should be finished in the next few months.
@solidskateboards I was rather surprised that a rocket this powerful was made with potassium nitrate. have you ever thought of making a PVC grenade launcher that fires missiles? THAT WOULD BE SWEET.
Hi, please tell me. If I add corn syrup to the KNO3&sugar mixture and mix it all together, would it make the fuel as flammable as it was? And what if I can't find corn syrup, what can I use instead? I want to be able to make fuel cells to add from one to three, depending on my needs. I appreciate your help!
Well it's a little more complicated than that. You need to mix them in the right ratio or your fuel won't burn. You can use Lyle's Golden Syrup if you're in the UK or you can Google how to make corn syrup on your own. It's pretty simple. You can also purchase the book "K450 PVC Rocket Engine" on Amazon or inverseengineering and it will explain exactly how to do it step by step.
Hi, please tell me. If I add corn syrup to the KNO3&sugar mixture and mix it all together, would it make the fuel as flammable as it was? And what if I can't find corn syrup, what can I use instead? I want to be able to make fuel cells to add from one to three, depending on my needs. I appreciate your help!
@solidskateboards is the corn syrup a binder or is it for a different molecular structure, because i assume you use rcandy because powder at that size is suicidal...anyways yeah...but when you melt and then crystallize again it shouldn't need a binder
The corn syrup is not a binder, the sugar is the binder. The corn syrup makes the fuel flexible so it won't crack and over-pressurize. The fuel is not rcandy, it's flex fuel and made completely differently.
Holy cow. I just don't get how Rcandy can get that kind of instantaneous thrust... I mean, it takes a second to ignite and reach its max output. Are you lining the core with something?
This isn't Rcandy, it's flex fuel. It's a different formula and preparation method than Jimmy Yawn's method. It's a single case bonded grain and there is nothing lining the core. The fuel is powdered sugar, corn syrup and Kno3. There is a book on amazon showing how to make it. It's called K450 PVC Rocket Engine Design and Construction by Dan Pollino.
Brother, do yourself a favor... Buy an accelerometer. A GWiz LCx would be an excellent choice, or an HCx will record and report data from your flight.
With this much impulse, you're going to approach Mach, if not transition it. Learn about doing composite lay-ups on the fins and fin/airframe joints. Stiffen the fins to keep them from fluttering, and improve the a/f to fin joint. Fin flutter and sonic transitions kill airframes dead without it.
Thanks for the suggestions! My building strategy is to put together high power rockets with off the shelf inexpensive parts that perform the same or better than commercially made rocket kits. My goal is to have the entire rocket cost less than $100 including the engine so accelerometers and composite materials are out of the question. I agree with you, they do work well, they just don't fit into my design strategy.
I'm stoke for next summer cause I think I might be able to set the record for Kno3. I'm working on a 2 stage right now that should perform quite handsomely. The only problem is getting to a good launch site. It's hard to play with rockets in the suburbs, but hopefully I can get down to a place like this to launch before I'm 18 and I lose my legal innocence for launching stuff into military atmosphere.
All rockets, amateur and professional have the potential to explode or not work correctly. That's part of the fun of this hobby is learning about all the forces involved in a rocket's complex flight.
obviously u havnt seen the video on how to make it on a smaller scale. that should explain alot. search rocket motor then fing the one that ses kno3 or sumat. should be the first 1 anyway
You made a motor using seven pounds of KnO3 and then light it and this is what happened? whats the diamiter of the pipe you used and how did you make the nozzle at the bottom if you dont mind explaining
Mix 65% Kno3, 18% powdered sugar and 17% corn syrup in an electric wok to 210 degrees. Pour it in an engine casing and put in a coring rod. Make sure the nozzle throat is sized so that the engine does not exceed 300 KN. Add an igniter and a smoke element then put on an end cap and seal it.
Thanks! Iron oxide will increase the burn rate of the fuel and cause the engine to explode. You can purchase it at most home stores as a concrete colorant.
wow! love it!
TheLittleWorldofGaz 1 month ago
Question: at what point, after graduating from Estes kits and designing bigger units, does the rocket need an actively self-adjusting guidance system to keep it flying vertically?
logicbranch 2 months ago
@logicbranch It never does, if it's built right, it will fly vertically just fine.
solidskateboards 2 months ago
@logicbranch
Now on the other hand, if you want a rocket that will fly perfectly straight horizontally, then a heading hold gyro and fast digital servo for each control axis would be a start.
mwilson14 2 weeks ago
Excellent stuff - love it !
I've just ordered a 25 kilo sack of KNO3, I've been reading up on the mixing of the 'rocket candy' and have some previous experience with smaller home made rockets. We don't have big areas of desert like this here in the UK but there are some wide open spaces - wish me luck !
BaddaBigBoom 2 months ago
@BaddaBigBoom Good luck!
solidskateboards 2 months ago
why not building a liquid fueled rocket? im working on an liquid engine right now..
soverato3 3 months ago
a lot of crazy things happen to a rocket when it aprouches super sonic speeds or goes though the sound bearea frist theres a ring of pressure around the rocket just as it goes thru sound, if the tube is not strong enough it crushes the tube and that little wobble as its going up is caused by it hiting the sound beara its like its bumping into it if the motors fast enough it will pop thru the bearea if not it bounces off it a so call stall, but when you see that little wiggle its hit the breara
david1513 4 months ago
are you puting your rocket kno3 mix in a reloadable motor like areo tech? i was thinking of doing this will it work?
david1513 4 months ago
actually if you read carefully you will see that i didnt say you supported anything
i was sugesting terrorists were watching the video thats totally different then verbaly emplying that someone supports terrorism you are accusing me of a false statment
it was a joke anyway relax my man
youngmoneycash10 5 months ago
wow 50,000 terrorists just learned how to dick us over one more way
youngmoneycash10 5 months ago
@youngmoneycash10 so ignorant
solidskateboards 5 months ago 12
@solidskateboards no actually not even close to recognizing my charactor buddy please
before you go judging anyone from now on i suggest you get your facts straight it was a joke
you took way too seriousely i love the rockets my self but dont fuckin brand a person on a single comment
it only marks you as a steriotypical ass hole if i didnt say anything about you dont say shit about me
youngmoneycash10 5 months ago
@youngmoneycash10 You did say something about me, you said I was supporting terrorism. That's a joke to you?
solidskateboards 5 months ago 5
@youngmoneycash,a couple of notes. Don't speak from ignorance. The BATFE recently lost a lawsuit in Federal court to the National Association of Rocketry and the Tripoli rocketry association for arbitrarily restricting high powered rocketry fuels. The fact is, Ammonium Perchlorate Composite Propellant (APCP) is much more powerful and legally purchased for this purpose.
Another bit of info, Hamas has been making their own rockets for many years now. Don't be ignorant.
johnmresler 5 months ago
where are these launches done?
knifemakejake 5 months ago
@knifemakejake California
solidskateboards 5 months ago
That sounded pretty kick arse! Seemed to have a radical flight path change half way. Im a science teacher and managed to burn my right hand with this stuff once. Luckily I didn't need the skin from my butt grafted to my hand, but it was a close call.
pooperscooper71 5 months ago
what r u mean by a sugar ? it is a normal sugar that we put inthe food ?
johnmhmd 5 months ago
@johnmhmd Yes, normal sugar.
solidskateboards 5 months ago
did you just use KN03 and house hold sugar ???? awesome video by the way
243bolt 6 months ago
@243bolt Thanks, yes.
solidskateboards 6 months ago
I wasted all my pottasium on a bunch of mini rockets, fuses, smoke bombs, and just testing a bunch of crap together like magnessium flakes.
Defaultbomb11 6 months ago
Are you supposed to compress kno3 sugar together hard enough for it to be one substance or do you just pour the kno3 in?
vlad781 8 months ago
so this was a homemade motor?
szelle63 8 months ago
@szelle63 Yes it was. All my engines are made in my garage.
solidskateboards 8 months ago
@solidskateboards whats the legality of homebuilt rocket motors? Is there a weight limit i'm guessing?
szelle63 8 months ago
@szelle63 There is and it's a Federal one but the engine would have to be HUGE, almost capable of reaching space. Anything you can make in your garage is legal.
solidskateboards 8 months ago
@solidskateboards not meth.....
bigbobgotu 6 months ago
awesome...one of the best i've ever seen
SIRanimationMANIAC 8 months ago
@SIRanimationMANIAC Thanks!
solidskateboards 8 months ago
Building Pop bottle rockets in Science this week... This... Is my Inspiration!
bt2332thomas 8 months ago
Thanks dude! Good luck with your project at school!
solidskateboards 8 months ago
Dude, sweet!
concordatthefort 9 months ago
0:33
TheMeperson1 9 months ago
that was fast, nice job dude
bigbilly81290 9 months ago
Thanks! I think it was too fast
solidskateboards 9 months ago
Put a warhead with a proximity fuze and a guidance system on that and you can shoot down aircraft.. for fun.
0pteryx 10 months ago
bad ass rocket dude! only a question, what speed those things reach as they are climbing?
sorry for my english
aleramone23 10 months ago
The one in this video....no idea, but with the K500 engine about 400 mph.
solidskateboards 10 months ago
NASA called.. They want their rocket back
GiggleGuyz 10 months ago
makes my small scale potassium nitrate rocket look like crap
TheFatbip 11 months ago
nice lounch guys i love the desert lots of room, i only have the AMA here to louch my rockets and there limited in size, is the out side of your rockey body PVC or card board caseing or alumunum, and how many pouns or grams of rocket fuel did you use in what size casting? thank you for posting the great video, David*
david1513 11 months ago
The rocket body is made from ABS drainage tube 3" diameter. The K450 has 4.83 lbs of fuel in it and the L950 had almost 10.
solidskateboards 11 months ago
Just got the book, can't wait to get started, this was an awesome launch!
antijes07 1 year ago
Great! Good luck! Post a video when you do!
solidskateboards 1 year ago
KNO3, sugar and cornsyrup, just grinded together?
zinjifra 1 year ago
You'd never want to grind the oxidizer and the fuel together, they might ignite. It's simple, the kno3, sugar and corn syrup are heated together to lower the viscosity and then poured into the engine casing to cool. I wrote a book on how to make the engine, it's available on amazon, it's called K450 PVC Rocket Engine. Good luck.
solidskateboards 1 year ago
@solidskateboards Okay thanks, I'll have a look.
zinjifra 1 year ago
@solidskateboards As an owner of this book I must say it is a must have. great instruction. Do you have instructions on your parachute piston design?
thanks for your work.... cool.
captainengine91 1 year ago
Thanks! That's awesome, I'm glad you like the book. I'm currently writing one on the entire rocket construction, not just the engine. It will have instructions on the parachute piston, the apogee detector, fins, nosecone, engine....all of it. Should be finished in the next few months.
solidskateboards 1 year ago
At first it was straight as an arrow and then it went bill clinton like (crooked).
LithiumHammer 1 year ago
Too funny.
solidskateboards 1 year ago
@solidskateboards I was rather surprised that a rocket this powerful was made with potassium nitrate. have you ever thought of making a PVC grenade launcher that fires missiles? THAT WOULD BE SWEET.
LithiumHammer 1 year ago
Don't really know.
solidskateboards 1 year ago
next time put a camera on it
12ViperPilot 1 year ago
what about the filming FROM the rocket ?
supermecis 1 year ago
did you add a ferric oxide to the mixture of the rocket s fuel?
aymanelrafee 1 year ago
No, just Kno3, sugar and corn syrup.
solidskateboards 1 year ago
how do you make it >?
zakamooza 1 year ago
I wrote a book on how to make the engine step by step, "Build it Yourself PVC Rocket Engine" available on my site or through Amazon. Hope that helps.
solidskateboards 1 year ago
Look likes Kassam Rockets haha
dimitrizacarii 1 year ago
Awsome
2129261184 1 year ago
This has been flagged as spam show
how do you make the L950 cuz im getting the book on k450 but i want to know how to make the L950 id appreciate ur help!!! btw awsome rockets
mrexample99 1 year ago
Awesome :))
TheOctastar 1 year ago
Wow, that one hell of a rocket. GOOD JOB GUYS
MrRiaanm 1 year ago
VERY UNSTABLE FLIGHT
pedrojorgeclaro 1 year ago
It was stable until it went supersonic and the fins ripped off. Oh well.
solidskateboards 1 year ago 20
@solidskateboards supersonic? you wish
Tomekpsp 1 year ago
Hi, please tell me. If I add corn syrup to the KNO3&sugar mixture and mix it all together, would it make the fuel as flammable as it was? And what if I can't find corn syrup, what can I use instead? I want to be able to make fuel cells to add from one to three, depending on my needs. I appreciate your help!
ParaglidingManiac 1 year ago
Well it's a little more complicated than that. You need to mix them in the right ratio or your fuel won't burn. You can use Lyle's Golden Syrup if you're in the UK or you can Google how to make corn syrup on your own. It's pretty simple. You can also purchase the book "K450 PVC Rocket Engine" on Amazon or inverseengineering and it will explain exactly how to do it step by step.
solidskateboards 1 year ago
Hi, please tell me. If I add corn syrup to the KNO3&sugar mixture and mix it all together, would it make the fuel as flammable as it was? And what if I can't find corn syrup, what can I use instead? I want to be able to make fuel cells to add from one to three, depending on my needs. I appreciate your help!
ParaglidingManiac 1 year ago
lloks a bit like quassam :D
RealBouba 1 year ago
Wow, that was beautiful, you have some great stuff. Thanks for posting.
macnutz 1 year ago
Thanks!
solidskateboards 1 year ago
how high did it get?
strangefactor 1 year ago
No idea. It didn't have an altimeter on it.
solidskateboards 1 year ago
steve lookin for the rocket,,,
IHeartGoodMovies 1 year ago
This has been flagged as spam show
That was totally awesome. Good job guys!
Now lets get the Myth Busters to do this experiment on a much larger scale.LOLZ
reptilesgamers 1 year ago
This has been flagged as spam show
That was totally awesome. Good job guys!
Now lets get the Myth Busters to do this experiment on a much larger scale.
reptilesgamers 1 year ago
next time make a bigger one ride it up then parachute down
phenixking300 1 year ago
nice sound of rocket
emofaraway 1 year ago
only if it had a longer burn time
kobasica 1 year ago
hamas!
JAMISONS 1 year ago
ocotillo?
mikefity4 1 year ago
Yes, Ocitillo.
solidskateboards 1 year ago
what desert are you guys in?
parangarikitirimiqua 1 year ago
We drive to a desert 90 miles east of San Diego, CA.
solidskateboards 1 year ago
Why use the corn syrup?
thetommantom 1 year ago
The corn syrup makes the fuel flexible and protects it from cracking under stress.
solidskateboards 1 year ago
@solidskateboards is this only for the bigger ones?
thetommantom 1 year ago
Smaller ones can crack too. It's good all around.
solidskateboards 1 year ago
@solidskateboards How much should be used??
thetommantom 1 year ago
65% Kno3, 18% sugar, 17% corn syrup.
solidskateboards 1 year ago
@solidskateboards will the corn syrup make it more or less powerful, or just make it so it doesn't crack??
thetommantom 1 year ago
It makes it a little less powerful since corn syrup consists of dextrose not sucrose but power is useless if the engine blows up.
solidskateboards 1 year ago
@solidskateboards is the corn syrup a binder or is it for a different molecular structure, because i assume you use rcandy because powder at that size is suicidal...anyways yeah...but when you melt and then crystallize again it shouldn't need a binder
shidoink 1 year ago
The corn syrup is not a binder, the sugar is the binder. The corn syrup makes the fuel flexible so it won't crack and over-pressurize. The fuel is not rcandy, it's flex fuel and made completely differently.
solidskateboards 1 year ago
Holy cow. I just don't get how Rcandy can get that kind of instantaneous thrust... I mean, it takes a second to ignite and reach its max output. Are you lining the core with something?
KingBerk104 1 year ago
This isn't Rcandy, it's flex fuel. It's a different formula and preparation method than Jimmy Yawn's method. It's a single case bonded grain and there is nothing lining the core. The fuel is powdered sugar, corn syrup and Kno3. There is a book on amazon showing how to make it. It's called K450 PVC Rocket Engine Design and Construction by Dan Pollino.
solidskateboards 1 year ago
@solidskateboards Well that explains a few things, thanks.
KingBerk104 1 year ago
Amazing! Bravo!
planmix 1 year ago
omggggg nice i wanna made that thing 100/100
bemari178 1 year ago
that def is supersonic
Salguodelaev 1 year ago
Holy Shit man that was insanium in the cranium.
SaltonSeaCoolio 1 year ago
I doubt it went super-sonic.....no offense! but non-the less this is amazing!!!
JoseKagan 1 year ago
hi
you can help me make a rocket? or give me a web steering to help me? Because an experiment in order to pass college physics class.
Also I am trying to make a rocket with Potassium nitrate and sugar, but I do not know if it's with PVC cylinders.
And pardon if I write bad, because I do not speak English, I only translate into google.
thank you very much
NoenvyOK 2 years ago
Get the K450 PVC Rocket Engine Manual at amazon.
solidskateboards 2 years ago
/watch?v=hmi0Sf_-BmQ
WascMeister 2 years ago
from where can i get Kno3
MRshaqrawi 2 years ago
From a product called Green Lantern Stump remover, which can be found at any lawn and garden store.
The chunks will need to be milled in a rock polisher before mixing your fuel.
Mill the ingredients separately or else you'll wind up with an explosion.
ChilesGreen 2 years ago
@MRshaqrawi
Ebay
newman015 1 year ago
awesone!! can i have it?dam that was fast!
bigmannick2 2 years ago
Beautiful!
Reqrezentin 2 years ago
thats a beautiful sound =p
seldian 2 years ago
happy festivus!
erl4nd0 2 years ago
verry niceee!!!!
mlok09 2 years ago
how did they know that it almost went supersonic??? something inside rocket?
JVC7400 2 years ago
Just a guess.
solidskateboards 2 years ago
@JVC7400 Becasue it was LOUD!!!!!! haha
derekroolz 1 year ago
Brother, do yourself a favor... Buy an accelerometer. A GWiz LCx would be an excellent choice, or an HCx will record and report data from your flight.
With this much impulse, you're going to approach Mach, if not transition it. Learn about doing composite lay-ups on the fins and fin/airframe joints. Stiffen the fins to keep them from fluttering, and improve the a/f to fin joint. Fin flutter and sonic transitions kill airframes dead without it.
I AM qualified to speak to this... 8^)
jmar1371 2 years ago
Thanks for the suggestions! My building strategy is to put together high power rockets with off the shelf inexpensive parts that perform the same or better than commercially made rocket kits. My goal is to have the entire rocket cost less than $100 including the engine so accelerometers and composite materials are out of the question. I agree with you, they do work well, they just don't fit into my design strategy.
solidskateboards 2 years ago
Good luck with it, bro.
jmar1371 2 years ago
Nice
Collserra 2 years ago
Nice
Collserra 2 years ago
this is all fine and dandy when you have a desert to fire rockets around. Where is this wonderful place?
The best ive got is a cliff where its so windy it near on sucks your eyes out your face. GOOD JOB YOU GUY!
anonarob 2 years ago
California.
solidskateboards 2 years ago
can u create a FULL tutorial plz ?
EXiS091 2 years ago 5
haha very nice, but after 2 seconds in the air, it went to the right, quite weird:P
Wesselvanoyen 2 years ago
I'm stoke for next summer cause I think I might be able to set the record for Kno3. I'm working on a 2 stage right now that should perform quite handsomely. The only problem is getting to a good launch site. It's hard to play with rockets in the suburbs, but hopefully I can get down to a place like this to launch before I'm 18 and I lose my legal innocence for launching stuff into military atmosphere.
LIGHTRONIX 2 years ago
my god. HOW AWESOME
MultiCreek 2 years ago
that was fucking ace
00dubstep 2 years ago
that was BADASS
quadboy114 2 years ago 13
Can this explode. I wanted to make and shoot at the helicopters flying at the border. Im joking. Does it explode?
Leny1777 2 years ago
All rockets, amateur and professional have the potential to explode or not work correctly. That's part of the fun of this hobby is learning about all the forces involved in a rocket's complex flight.
solidskateboards 2 years ago
TOP NOTCH LADS!!!
will01r 2 years ago
@Leny1777 PSSST AIM FOR THE PROPELLER IN THE REAR.
RAWRAWRWAR 2 years ago
Is rocket-launching prohibited in certain areas of the US?
OmniPhun 2 years ago
@OmniPhun if you shoot it parallel to the ground then they can't moan about it and will make a really cool missile.
mrdojob 1 year ago
i ownder what would happen if that pvc hits some1 in the head when its coming down you guys should try it!
nubserver 2 years ago
Are you volunteering?
solidskateboards 2 years ago
no but i can give you my brother!
nubserver 2 years ago
and that was KNO3 and sugar? nothing else?
gautis55 2 years ago
Some corn syrup to make the fuel flexible.
solidskateboards 2 years ago
how much fuel did you used?
emiliotenor4life 2 years ago
9 pounds
solidskateboards 2 years ago
THIS IS INSANE¬!!
will01r 2 years ago
Where can you get ignition rope or can you make it at home
markedone34 2 years ago
i saw that in another video...you need some electrical wires , a switch and electric conection
emiliotenor4life 2 years ago
where do you put the stuff
markedone34 2 years ago
how do you lunch it, I mean how do you lunch it if you are not close (with a burning rope or what)
markedone34 2 years ago
Instructions on making the engine can be found in a link in the "more info" section near the "subscribe" button.
solidskateboards 2 years ago
How much does the book cost??
johnxxx9 2 years ago
well i have constructed pvc rockets shoes but havin tryed them yet but i will be 2make a video wen i do
Antmoe1993 2 years ago
holy shit wait kno3 was this rocket candy or just the kno3 plus sugar and kitty litter or something else completely? i couldnt believe that thing...
HaloNoobAlert 2 years ago
Read the video description, there's information there on how it's made.
solidskateboards 2 years ago
sorry i actually did read it, i came back to the video after a while and 4got about the link.
HaloNoobAlert 2 years ago
what was that at 1:11.
stupidvideoalert4 2 years ago
Mother of god! I need to make one.
HoboJIm117 2 years ago
obviously u havnt seen the video on how to make it on a smaller scale. that should explain alot. search rocket motor then fing the one that ses kno3 or sumat. should be the first 1 anyway
ghostom998 2 years ago
Why would i want to make it on a smaller scale?
solidskateboards 2 years ago
not u, i was replying to seldian. i was trying to answer a question for u and its on another video on how to make them on a smaller scale.
ghostom998 2 years ago
oh cool
solidskateboards 2 years ago
no small.....big scale!
cabeman want big!
jessekarate08 2 years ago
How many pounds of fuel did you have in there?
seldian 2 years ago
7 pounds
solidskateboards 2 years ago
so you just put 7 pound motor inside a pvc pipe rocket and let it go?
seldian 2 years ago
I'm sorry I don't understand the question.
solidskateboards 2 years ago
You made a motor using seven pounds of KnO3 and then light it and this is what happened? whats the diamiter of the pipe you used and how did you make the nozzle at the bottom if you dont mind explaining
seldian 2 years ago
The nozzle was made out of concrete and the engine was made from PVC. The nosecone was a plastic wine glass and the fins were wood.
solidskateboards 2 years ago
you can find more information on the construction of the engine at inverseengineering
solidskateboards 2 years ago
But u have to pay for that!
Can u tell me how to make it?
tallblocker1 2 years ago
Mix 65% Kno3, 18% powdered sugar and 17% corn syrup in an electric wok to 210 degrees. Pour it in an engine casing and put in a coring rod. Make sure the nozzle throat is sized so that the engine does not exceed 300 KN. Add an igniter and a smoke element then put on an end cap and seal it.
solidskateboards 2 years ago
this rocket kick aSSES!!
Helloween85 2 years ago
the first time the noise reminds me the new transformers misils sound
Andre232323232332323 2 years ago
that was one strong rocket.
RicardoGarciaPino 2 years ago
What quantity of fuel did you use?What was the size of the thrust hole?How did you fill the engine with the powder?
Winchester943558 2 years ago
solidskateboards you say if you add rust its more powerful did u make your own rust or did you get something more spesial?
Thanks i love your work
Winchester943558 2 years ago
Thanks! Iron oxide will increase the burn rate of the fuel and cause the engine to explode. You can purchase it at most home stores as a concrete colorant.
solidskateboards 2 years ago
how much rust? well to what ratio would u say?
ghostom998 2 years ago
3% will do the trick
solidskateboards 2 years ago
That's amazing!
frozends 2 years ago
how much kno3/sugar in each rocket? O_O
antiswattt 2 years ago