Anyone want to help me? I have a problem with my walkera 4g3. When i hover the helicopter, it keeps going backward and i need to push the forward button. any suggestion?
did you modified anything ? Your 4G3 should be balanced if you lift it while holding the shaft with the flybars.
You could check the elavator trim adjuster on your remote control. Maybe its misplaced accidentelly.
Take a look at the swash plate. If it lean backward you might need to adjust. It should be horizontal if forward/backward stick is in neutral position.
No bluffing here.The bluff is by the OP.I just want to see it flown there.I know it's possible and really not even that hard to do.Hell,Bobby Watts can land on a wall.Now that's hard to do.
again with someone lashing out without a clue.lol...I didn't say the heli can't do it.Let's see one of the heli actually flying into that position.BTW..I have plenty of 3D helis and yes,plenty of crashes too.But I crash trying shit for real and not faking little stunts like this one.
you guys are arguing over who is a better RC HELLI GEEK!!!!! HAHAHAHAHAHAHAHAHAHAH!! i bought one of these little guys. it was pretty fun.. then the fun dulled and i told my brother he couldnt shoot it out of the sky with his springfield 1911 A1... i lost .... no more 4G3.. it was well worth it. it took him all of 4 shots at about 15 yards.. damn good shootin!!!!!!
I have a question for you. How do you suppose that he stuck it on the ceiling by hand while the blades were spinning? There is no where to hold the heli while it is spooled up dumb ass. I love when people think that us rc heli pilots "fake" these 3D maneuvers.
I do that all the time.I even have a video on youtube of my Blade MCX inverted on the ceiling.These helis are small enough that you just reach your hand in above the skids and hold it to the ceiling.Then you have someone throttle it up for you until it will stay on its own and then you take the TX and Ta Da,inverted on the ceiling.
I am a good 3D flyer and I still know fake.I meant that he didn't fly it there.He spooled up and stuck it there by hand.I know the left stick is and right stick and atv's and expos and sub trims ST1 ST2 Norm Aux1 Aux2 Gear blah blah blah...I'm pretty familiar with my DX7 and JR9303....Dumass ;)
How do you hold a moving helicopter upside down? There's no surface, especially on that tiny of a size to have held it upside down while placing it on the ceiling. It is not fake.
The same way I do.Slide your fingers through the landing skids and hold it to the ceiling.Being smaller makes it easier,not harder to do.Check out my video of a coax MCX inverted on the ceiling and ask yourself..."How did he do it?".I faked it.Very easy to do and I did it just to show how easy it is.
lol...so lame.You gotta make personal attacks because you just reallized you are the one who knows nothing about the issue.lmao....So,just what do you know about 3D?Do you know the difference in a piro flip and a chaos?When inverted,are all the controls backwards or just some of them?Do you know anything at all about 3D flying?
brascolatino The big difference from the MCX you'll find is its a co-axel (2 props spinning in opp. directions VERY STABLE) VS. 3D Heli's all have one set of blades (Single rotor helicopters) and are not fixed pitch so there is a considerable difference. You can try crashing some at your local hobby shop on there flight sim just to get the feel of it. I also fly Co-axel heli and have my first 6CH Heli on its way. I'm sure it will be crashed many times before figure it out. :-)
good stuff what are the movements to make it go inverted cause I can fly a 4 channel blade mcx but this is proberbly harder to fly but I am gonna buy it soon but cause I am a newbie I know nothing about flying inverted but would like to learn
I do, the difference being that the guy flying the Piccolo pro actually had some pilot skills. I'm sure this guy just stuck the heli up there with his hand which is why he never showed how he got it up there nor how he got it down.
interesting little ceiling fan...
bliglum 1 year ago
God fucking job ffs! Cool wife too!
Voncroee 2 years ago
what did you use to strap your feet to the ceiling?
mochamon 2 years ago
now how to get it down:P
knifeedge63 2 years ago
fishlover1412 you need to trim your helicopter you do that with the trim tabs on the radio
10fantic 2 years ago
Anyone want to help me? I have a problem with my walkera 4g3. When i hover the helicopter, it keeps going backward and i need to push the forward button. any suggestion?
FishLover1412 2 years ago
Hi FishLover1412,
did you modified anything ? Your 4G3 should be balanced if you lift it while holding the shaft with the flybars.
You could check the elavator trim adjuster on your remote control. Maybe its misplaced accidentelly.
Take a look at the swash plate. If it lean backward you might need to adjust. It should be horizontal if forward/backward stick is in neutral position.
fairydragon72 2 years ago
It's worked! The wife looks ready. Go for it.
number8mikee 2 years ago
mobile ceiling fan! I like it!
TALLCOOL10 2 years ago 3
go fuck yourself. :)
piperpilot26 2 years ago
No bluffing here.The bluff is by the OP.I just want to see it flown there.I know it's possible and really not even that hard to do.Hell,Bobby Watts can land on a wall.Now that's hard to do.
erniemcdowell 2 years ago
again with someone lashing out without a clue.lol...I didn't say the heli can't do it.Let's see one of the heli actually flying into that position.BTW..I have plenty of 3D helis and yes,plenty of crashes too.But I crash trying shit for real and not faking little stunts like this one.
erniemcdowell 2 years ago
Your wife doesn't look too impressed, mate.
Just one thing - you forgot to film the bit where you get it off the ceiling and crash it into the couch.
yeogav 2 years ago
you guys are arguing over who is a better RC HELLI GEEK!!!!! HAHAHAHAHAHAHAHAHAHAH!! i bought one of these little guys. it was pretty fun.. then the fun dulled and i told my brother he couldnt shoot it out of the sky with his springfield 1911 A1... i lost .... no more 4G3.. it was well worth it. it took him all of 4 shots at about 15 yards.. damn good shootin!!!!!!
bencinurts 2 years ago
Perfect!!!!!
yvonnevanmeerten 2 years ago
That gives me $1,000,000 idea
I just invented ceiling fan - that is also helicopter
I patent tomorrow
OghamTheBold 2 years ago
i have the novus cp and it flys good have fun
lee0ez 2 years ago
a redneck way to make a portable fan lol
atomicboy222 2 years ago
Fake fake fake.He put it there by hand.
Hey pal,let's see you fly it up there and THEN get it down.
With the TX that is.
erniemcdowell 2 years ago
I have a question for you. How do you suppose that he stuck it on the ceiling by hand while the blades were spinning? There is no where to hold the heli while it is spooled up dumb ass. I love when people think that us rc heli pilots "fake" these 3D maneuvers.
cleansho93 2 years ago
The same way I did dumbass!!!
I do that all the time.I even have a video on youtube of my Blade MCX inverted on the ceiling.These helis are small enough that you just reach your hand in above the skids and hold it to the ceiling.Then you have someone throttle it up for you until it will stay on its own and then you take the TX and Ta Da,inverted on the ceiling.
Fake fake fake.
erniemcdowell 2 years ago
And by the way,I'm a 3D flyer myself.I know fake when I see it.That heli is tiny and very easy to handle while it's spooled up.
erniemcdowell 2 years ago
fake? you obviously don't fly 3d. when in 3d mode, the left stick all the way down is full negative pitch. so this is possible. dumbass.
piperpilot26 2 years ago
I am a good 3D flyer and I still know fake.I meant that he didn't fly it there.He spooled up and stuck it there by hand.I know the left stick is and right stick and atv's and expos and sub trims ST1 ST2 Norm Aux1 Aux2 Gear blah blah blah...I'm pretty familiar with my DX7 and JR9303....Dumass ;)
erniemcdowell 2 years ago
yes this is true, he may have done it that way, but its still not fake..
piperpilot26 2 years ago
How do you hold a moving helicopter upside down? There's no surface, especially on that tiny of a size to have held it upside down while placing it on the ceiling. It is not fake.
GrubFlyer 2 years ago
The same way I do.Slide your fingers through the landing skids and hold it to the ceiling.Being smaller makes it easier,not harder to do.Check out my video of a coax MCX inverted on the ceiling and ask yourself..."How did he do it?".I faked it.Very easy to do and I did it just to show how easy it is.
erniemcdowell 2 years ago
Aaahhhhh,I just got your handle."Piper"pilot.I get it.A freakin planker.lol.....
erniemcdowell 2 years ago
go fuck yourself..fag. again, you know nothing about flying rc heli's..now be a good boy, and go play on the train tracks.
piperpilot26 2 years ago
lol...so lame.You gotta make personal attacks because you just reallized you are the one who knows nothing about the issue.lmao....So,just what do you know about 3D?Do you know the difference in a piro flip and a chaos?When inverted,are all the controls backwards or just some of them?Do you know anything at all about 3D flying?
erniemcdowell 2 years ago
absolutely amazing....... shocked!
vitorisaia 2 years ago
Now i want to see you get that sucker down! Hahah.
Without hurting yourself that is.
knifeedge63 3 years ago
hahaha thats too funny cool video
DanielTheManiel33 3 years ago
brascolatino The big difference from the MCX you'll find is its a co-axel (2 props spinning in opp. directions VERY STABLE) VS. 3D Heli's all have one set of blades (Single rotor helicopters) and are not fixed pitch so there is a considerable difference. You can try crashing some at your local hobby shop on there flight sim just to get the feel of it. I also fly Co-axel heli and have my first 6CH Heli on its way. I'm sure it will be crashed many times before figure it out. :-)
1wheelmaster 3 years ago
ahh, we didn't see it stick on the ceiling..or come off the ceiling...i see where your going now
pointnozzleaway 3 years ago 2
good stuff what are the movements to make it go inverted cause I can fly a 4 channel blade mcx but this is proberbly harder to fly but I am gonna buy it soon but cause I am a newbie I know nothing about flying inverted but would like to learn
awaiting your reply and well done my friend
brascolatino 3 years ago
Hi, i recommend you to buy/download a flightsimulator first. (not FMS, but Ikarus Aerofly or something nice like that)
Or else you will cry when crashing your heli the first time you try it out.
Chronoholix 3 years ago
I guess it was just a matter of time. Anybody remember the clip with the picolo pro doing this in some community center?
captainTubes 3 years ago
I do, the difference being that the guy flying the Piccolo pro actually had some pilot skills. I'm sure this guy just stuck the heli up there with his hand which is why he never showed how he got it up there nor how he got it down.
lockpicker2k 3 years ago 6
how did you land/catch it? :O
RcAntax 3 years ago 2
Its CCPM. That means it can change the pitch of the blades. Right after this he just lowered it off the ceiling and flipped it over and landed.
forrest225 3 years ago
Really? I thought it was to small space to be able to flip it there!
RcAntax 3 years ago 2
yeah, there is not much room, but I think its possible.
forrest225 3 years ago
Excellent !!!
williamnoel 3 years ago
lol my thoughts exactly....but am waiting for the same opportunity myself ;-)
Jonaped170 3 years ago
Cute co-pilot ;-)
strueblood 3 years ago
WHERE did u get yours?
boater400 3 years ago
Thanks guys!
3vw 3 years ago
I wonder how long it will be before we see someone else do this with their 4G3.
3vw 3 years ago
hey love to see these videos cause I cant afford to buy one myself. so a video here and there keep me somewhat happy. keep posting I love to watch.
cowlikk 3 years ago
Hey 3vw,
Funny the transitions weren't shown. Don't blade chop your hand getting it down!
When parts are avail I hope to see it for real.
Enjoy your 4G3.
Amp
AmpCam0417 3 years ago