Added: 4 years ago
From: generatorblue
Views: 133,078
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (47)

Sign In or Sign Up now to post a comment!
  • If you want to get the free energy magnetic-generator plans

    Just search Google for "Top Magnetic Generator"

    Click the First result (Skip the Advertisements)

    I found it to be a great resource

  • That is somthing that works!!

  • Ha Ha ever heard of magnetic coupling?,funny how after you aliened it with the hidden invisible field it spun up and reached a constant velocity.as the driving magnets or field you used to power it.wheres it hidden ?

  • @HANDBALLDIEHARD Hi! In general, it is always a good idea to read a few of the previous comments before you write one yourself. This is why companies usually have pages of FAQ (Frequently asked Questions).

    People who build permanent magnet alternators are familiar with the term rotor. A rotor is not a motor.

  • @generatorblue Oh ok its just about rotating magnets to experiment with an alternating pulse ac generator.yea its fun experimenting with basic electrical concepts.an even more interesting experiment would be to demonstrate to people the invisible power of magnets by placing 2 of these parrallel to each other,spin one and the other will be motivated to turn too,thats what i meant by magnetic couple.many videos faking perpetual motion things use that trick to give the appearance of it.

  • @HANDBALLDIEHARD Hi! You have me thinking about magnetic coupling. Do they build magnetic clutches? If you search for "Magnetic Levitation Windmill" you will find something that you like. I suggest that you build one and take it one step further by adding a third magnet in the middle. On many occasion I stacked up a few small doughnut magnets with a pencil at their center while the magnets repelled each other. I am sure that you have done the same. I'm trying to use smaller and fewer magnets.

  • @generatorblue Buy some neo magnets,small super powerful,also there are neo magnets in computer hard drives,if you take them apart,lotsa bad ones around that are worthless but good for scavenging parts,those magnets in HD's are very cool they are North South on top and bottom on either end and reversed at opposite ends,also they are curved good for building circular objects.I heard if you can create a strong enough mag field of repulsion it creates anti-gravity !,it is highly top secret info !

  • @HANDBALLDIEHARD I recycled lots of hard drive magnets and I purchased lots of neo magnets. I used neo magnets in all my alternators. But, I bought a set of 1 1/2" diameter by 1/2" tall neos and decided that I was not going to build with them because they just scared me. When I built my first set of rotors 5 years ago, I was using ceramic magnets. But the rotors came together and trapped some skin from my hand between them. I was alone and it took 30 painful minutes to free my skin. Thanks!

  • @generatorblue Dam that much neo magnet deserves respect,i think they can crush bones and fingers too,OCH,

  • The little shove you gave it to get going would spin a standard bicycle wheel longer without anything attached.

  • @GreggPayne A rotor is not a self-powered wheel. A rotor is part of an electric motor. Rotors and stators are the two main parts of motors and generators. I named this one is "magic" because it is easy to build with hand tools. Eventually, I will assemble the "magic" motor and will not need to give it a spin. You can watch the "bicycle wheel generator with magic rotor" video to see the rotor together with copper coils generating a little bit of electricity when I give it a spin.

  • any chance you could give us a more detailed explanation of how you built this?

  • @CommonBelief Hi! With the "magic rotor" video, I included 30 lines of text describing building procedures and material used. I did the same for the "bicycle wheel alternator with magic rotor" video. Below the viewing screen of each video, you usually can read a line of text that either ends up with 3 dot "..." and have a "double arrow down button" located at the upper right corner of the text section, or have the words "more info" in blue at the lower right corner. Click on links and read. Thks

  • Great. Am impressed.

  • @271828183141592654 I neglected the magic rotor setup for a couple of years now because it was based on a narrow rim with few spokes. I promise to come up with a setup that can use a wider variety of bicycle wheels and also delivers more power. When I built the "hangaround windmill", I promised that I would make an alternator with a bicycle wheel. The "bicycle wheel alternator with magic rotor" was the first such alternator. The "Haitian alternator is another. Thank you! I will try again.

  • @generatorblue, Yes, please pursue this. I think that there is something really good behind it. 

  • @271828183141592654 The truth is that I am always looking for ways to improve everything that I make. In the case of the magic rotor, the bottleneck is to have a wheel that is balanced (true) and will remain balanced for a long time. I also cannot use wood unless I cover it with multiple layers of paint. Yet, the simplicity of the assembly is promising. If you can make it better before I do, please share. Thanks again!

  • @generatorblue any chance you can provide a more detailed description of how to make the magic rotor?

  • @ 0:22, you dropped your weed

  • @TerdFergesson Your weed or something else that you also do must have dropped you. This is not about magic, it is about a rotor used in generating electricity. It always helps to read the previous comments before you write your own.

    Try again!

  • May be it could be a free gift but nothing is free in this universe till now in my experience.May be in future some brain can produce free energy.In my experience output is always less than input in equal value.

    We can make free moving devices but no more out put.So its useless in practical and commercial matter.Appreciated your Ideas but its not new.

    Ganesh Man Lama

    Researcher/concept designer

    Nepal alternative power resources p ltd

    engineering_nature@yahoo.com

  • Do you know what Brushless Motor is? If you know we have 2 kind. In. and OUtRUnner. Imagin that you could put both of them into one system. Can you Imagin that? Do you know about the 2 austrilien men who made a working Motor. Which uses 7w. of Power and in the same time it can delever power to two households? Research Brother and use your time into something good for all..... :-)

  • @Ebdan88

    Wind towers are not free or cheap.Deep cycle batteries are not free or cheap and are certainly toxic. In other words, we all can do better. Notice that my devices only reqyire hand tools to build.Mechanical machines usually require precise motorized tools (machine shops).The magic rotor itself has reduced the danger (to human hands) posed by two disks loaded with powerful magnets.There is more to it than just producing power. Nuke produce power until! Now oil is doing the nasty.

    I

  • waste..

  • @faridabadboy007

    I used it to make some electricity. Watch "bicycle wheel generator with magic rotor"

    or "wind wheel power", with a little help from the wind. It is not a waste of nature by means of an oil spill. I am sure that you can do better.

  • what a waste of a good bike, lol. just turned the wheels into wooden 4-leaf clovers, totally unsuitable for riding.

  • I agree. However one day, I tried to use a rusted bicycle wheel for riding I quickly discovered that once the chrome eroded,

    the wheel grinds the brake pads and make them useless in a short period of time. In other words, this design was originally made for recycling rusted bicycle wheels.

    Thanks!

  • Um... WTF?

  • What you see is what you get: a rotor for a pancake generator. However, 4 pairs of magnet holders allows you to deal with only 1/4 of the total magnetic attracting force that two full disks of magnet would otherwise deliver. The magic is being able to assemble a rotor without a machine shop. It is rated PG.

    Thanks

  • can this be made of plasctic ( from old discs =]) + magnets?

  • Since wood is affected by humidity, plastic would be a good alternative. However, the plastic must be rigid

    (Thicker than 1/4 inch).Vinyl disks would not do because they are too flimsy and can become very soft in the sun.A rigid piece of plastic that can take the heat will be best. The material that you use must allow you to keep a 1MM gap between coils and magnets.For metal disks, use the Hub'o turbine setup. The Magic rotor uses slices from a wood disk that were also carved to avoid spokes.

  • Hi!

    When the wind stops blowing, the windmill slows down and then stops. If the windmill (the turbine) is attached to a generator, the setup is known as a wind powered generator.

    This is a permanent magnet generator. The part that holds the magnets is called the Rotor. The part that holds the coils is called the Stator. This is not a self powered free energy machine. The bicycle wind generator with magic rotor video clip shows how the generator transforms mechanical energy into electricity.

  • ok, when foed it stop spinning?

  • Ha! "My gift to the world." What a great attitude!

    Jeez I love the idea of people changing the world by building stuff in home workshops. That's exactly where Hewlitt and Packard started HP.

  • Wigy (short for windEnergy), I thank you for the kind words. Please take a look at the "tomato Cage wind turbine" that I just posted today April 15, 2009. With that design, I will finally achieve the speed that I have been looking for. Thanks again!

  • I really don't care much about this being used in any other generators o whatever. Your positive attitude is what matters. I smiled right after your "my gift to the world". I will make my own and named P R Paul.

    Thanks for such a great gift.

  • On eBay, a bicycle dealer (biketony007) is the only supplier of the wheel that I used. There are lots of different bicycle wheel designs for the same tire size. Once you achieve a1 mm gap between magnets and coils with a certain wheel design, trying to build the same generator with a different wheel design forces you to change too many dimensions. The outside width of the rim is the initial gap. That big gap is filled with the thickness of the coils and the magnets + (2) 1mm air gaps exactly.

  • nut jobs

  • Try it, you'll like it. I am assuming that you know that rotors of this shape are used in "pancake" electrical generators. If you build one, do a better job, by cutting the slices more precisely and not leaving any gaps in between them. The simple generator prototype that I built with it had just one phase (11 second video clip). Three phase electrical generators are more practical. Thank you for the "bolt" comment.

  • Would be more impressive if it was a ten minute video of the thing powering just one small light bulb!

  • Elyo, you are right!

    I initially filmed a two minutes video clip. However, uploading the video clip took forever (I had a slow connection). I kept making it shorter until it was only 11 seconds long.

    seven months later, I had the wind spin it (see "wind wheel power" on the generatorblue channel). Then, the light was not as bright, but I was able to show that I could build a complete wind powered generator. Since wood expands when it's wet, I have 2 choices: use waterproof material & enclose.

  • but its slowing down, it looks like a normal wheel just turning?

  • It is supposed to slow down unless the wind (or my hand) keeps spinning it.

  • i thought the idea of magic was to never stop

  • MERCI BEAUCOUP!

    from RADIORADIO or radiox2

  • De rien!

    I really appreciate it.P R Paul

  • I placed a picture of my latest bicycle hub generator "plan" as "generatorblue" channel image. Please feel free to copy the image and enlarge it.

    The name of the Bicycle hub generator is the "HUBO" or "HUBO TURBO" if you prefer.

    A video clip will follow in 2009. I also added some more details about the picture in the comment section of the "generatorblue" channel. No more spokes to avoid.

  • Thank you. I hope that you have also seen the generator that uses this rotor. Note that the electric box that supports the coils has been replaced in my latest model (not yet posted).

    I placed another coils support system in the rear. This is how I freed up the front for blade installation. Now, the bolts are also used for attaching the blades. I am tooling up for quick assembly. That will take a while,

    but will have more coils. Thanks again

  • GenBlue

    The Real Magic is in your great Idea.

    with minimal tools and labor someone could easily turn a bike into a real nice generator for basic power needs

    great job!

  • Thank you Hydro. I took a quick pick at your channel and will surely take a longer (one hour)look. It looks technical and I will likely learn something, hoping that I could learn more. For now I will simply mention that I have been thinking about hydroelectricity as well. I was thinking about using large diameter bicycle wheels to built hydroelectrical devices. But since magnets are not cheap, my next generator will be made with a small bicycle wheel. Thanks again, I appreciate it.

  • at 0.25 you can clearly see that the video was stopped...good try dude...

  • I thought that I answered this question in my response to an early comment. It is just a Rotor that you can build without machine tools. If you go to the "generatorblue" channel" you will see how it is used. I simply gave it a spin. It is not supposed to keep going by itself. Rotors plus Stators are used to make motors and generators. Both motors and generators transform energy from another source. Magic: "You can change a bicycle wheel into a rotor without making a single change to the wheel."

  • thanx..now it's clear ;-)

  • Come to think of it, I should have said:

    Motors transform electrical energy to mechanical energy and generators transform mechanical energy to electrical energy.

    Each time I build something in a fraction of the time I anticipated it would take,I call it magic. I am used to have things get harder from thinking about it to actually building it. When the opposite happens, I feel like the thing wants to come to life. Sometimes it is out of my control, it is therefore magic.

    Can't do card tricks.

  • Hi!

    When the wind stops blowing, the windmill slows down and then stops. If the windmill (the turbine) ia attached to a generator, the setup is known as a wind powered generator.

    This is a permanent magnet generator. The part that holds the magnets is called the Rotor. The part that holds the coils is called the Stator. This is not a self powered free energy machine. The bicycle wind generator with magic rotor video clip shows how the generator transforms mechanical energy into electricity.

  • it was slowing down....

  • I called it "Magic Rotor" because it is easy to build and assemble. There no "real" magic going on.

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more