Micro Twister Pro indoor RC helicopter with Beginner and Advanced flight modes

[cherellecarroll]

Ok so my son had one of these out of the box for a day and it broke. As previous comments have stated the spare parts that come with the unit are not the ones I need. Its the balance rod that sits under the top set of blades, it snapped in two. How do I go about replacing this part? Anyone?

[vyss2003ute]

@cherellecarroll Your local hobby shop or go to there website and order them, cheaper to..

[shades2]

Mine flies for about 1.5 - 2 minutes then loses lift, and I have to land. I wait a few seconds and it's ready to fly again, very strange. It's like a component is overheating.

[S810swolf]

My flybar came off and I need to know how

To put a new

One on

[MultiThecomputernerd]

can someone help me mine wont charge!

[UrShoesWereDelicious]

@MultiThecomputernerd neither

[rcgvcageo190]

good helicopter :)

[lizards01BMX]

@rcgvcageo190 agreeed :)

[MrJED698]

Only Thing i hate about mine is the number of screws u have to take of to fix it:(

[zamm57]

hey how do i get better batterie time out of it i get about 1 minute solid flying then the batter has power but not enough to fly proper and then it has no lift at all what do i do

[AustinPetDetective]

@zamm57 You should get at the very least 5- 8 mins of good flying time. If not batteries in your transmitter may need changing. I dont know the exact specs but I thought this would be correct ?.

[Cedavichi]

my flybar pins broke as well during flight and it flew crazy, but if u order a new flybar (cheap and easy to get) you get the pins with them

[zamm57]

i got five flights out of mine and now it takes off and starts wobbling in mid air what do i do to fix it im gonna probs take it back for a refund if not ill try and fix it lol wat do i do hhhhhhhhhhhhhhhhhhheeeeeeeeeee­eeeeeeeeeeeeeeeellllllllllllll­llllllllllllllllllllllllllllll­lllppppppppppppppppppppppp!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!

[sepatown]

@zamm57 replace the little flybar pins. i used a bit of a paper clip.

[RorketMBA]

@sepatown What type of paperclip? All the ones I've tried have been too small or too big!

[MrGoandgetstuffed]

@zamm57 Check the fly bar hasn't been damaged during a crash.

The fly bar may be loose, in which case tighten the screws or, it may be bent, in which case attempt to straighten it. We had the same problem and fixed t as stated. It now flies as new.

[Theskateandsurf143]

@zamm57 take it back and tell them to fix it it happened to mine and i got it fixed and now its heaps stronger

[hodgy1004]

@Theskateandsurf143 mine also did this but my LHS just gave me another. Its pretty cool!

[venya001]

This is a good little helicopter! it has a few flaws, as discussed in the previous

comments, however it flies very well. If you live in the West Sussex area pop

into full throttle models, in Upper Beeding. We have loads in stock! plus will

also be stocking the Syma models very soon. Call them on 01903 816116.

Very helpful model and computer shop

[Drackaza]

lots of fun to fly

[AGLB56]

Well it does fly well, how ever I have now had two that lasted for about 10min due to the pin that holds the fly bar falling out!! The old model(last year) is still doing well, I wont be getting another one, Syma seems to be better made. Also it is not a simple job to replace the batt as was suggested in the add that I saw.

[PonyHaven]

@AGLB56

Crikey, I had the same problem. One of the flybar pins fell out - in flight - and made the chopper seem like it was drunk!

I managed to repair it, and it flies like a dream now.

Oddly, the spare parts that you get with these are never needed. It's usually something else that falls apart.

Still, with all of these little faults, these little fellas are a pleasure to fly :) .