New box EU700

[rudips21]

orrible suena

[10cmsub]

it lasted very short but at a short time after it died i bought a nice subwoofer

[LordPS3]

how do you tune the port? i've been trying to figure it out cuz i want to build a box for 2 15s.

any help is appreciated!

[LowNKum]

did you ever get the amp and wire it up to 600w?

[barevids]

unfortunately it died before i had the chance :(

[billiambarnett]

Got an eD in your car? lol

[JankaB22]

WTF ?

[SuperSmasher97]

nice what are the first two song?

[proaudiohd]

Which remix is that?

[barevids]

cocking? i used a sealant called Mastik, if you mean something similar. its like a layer of gungey stuff that oozes out between any gaps as you screw it together. completely air tight xD

[barevids]

yeah its great stuff and satisfying when it turns out good, ive recently built a dual 8" chambered folded horn, and the results are amazing, and it sounds great alongside my previously built dual 8" L ported :)

[dnick454]

@semiLivedj That's not a term in ANY country. Caulk perhaps? Definitely not spelled COCK...

[rebel119wrestler]

@semiLivedj its caulk not cocking u retard

[semiLivedj]

@rebel119wrestler Fuck you goofdick!

[rebel119wrestler]

@semiLivedj ur just mad that u like cock...go back to school and learn to spell you fucking retard

[semiLivedj]

@rebel119wrestler Nope,not mad,just get irritated by the amount of people who try so hard to think their better than everyone else.News flash,you will die alone!All assholes die alone!So go kill some puppies and have a good time,and you better go get your flu shot,its that season again:D

[rebel119wrestler]

@semiLivedj i dont think im better then ne one i graduated from school tho so that might be the difference...

[semiLivedj]

@rebel119wrestler Yeah,you learned how to be a good little factory worker,Congratulations!You thinking that it makes a difference shows how fucking stupid you are! Everybody knows that a govt. funded school is a joke!Except you.Hahahaha.Now go and make the govt.as much money as you can,and be a good little slave!Now excuse me while I go cash some checks I have laying around.Hahahaha

[criticallistenphile]

@semiLivedj I'm pretty sure the word your are looking for is "caulking". Cocking is what you do with a gun to load the round into the chamber...

[ThisIs2009]

cocking is caulking spelled and pronounced incorrectly :-)

[4785627]

dude chek mine out! i made something like this but a smaller speaker! its pretty tight!

[jesseadkins187]

lol i love how noone comments on that bad ass little sub and just wants help building shit

[rotel1080man]

i thort u made it but your dad made it

[barevids]

this was ages ago. he cut the wood and done measurements cos he could do straighter lines. i built my new one totally alone.

[rotel1080man]

wots the fst and scnd song

[escalante713]

How do you make a speaker box like that for a 12 " i dont now how much wats or wat brand am fixxing to buy it and i need the measurements can you give them to me please

[WTFp0s]

You gay

[thebassmastermix]

is that mdf board?

[tan1968vox]

and i want it tuned to 35 hz man..tnx broda..

[tan1968vox]

hey man i realy need some help i kno u can help me,cause im planning to build a box..can u help me with the dimensions i have to aply..hmm i have 1 12'' 2000 watt sub..and im planning to put it in a 2.5 cu ft. box..can u help me on how many inches of the width and the height and other dimensions..hope u reply man preciate it..

[barevids]

2.5cuft.... hmm i would have said a bit more for 2000W 12". but it will still sound crazy. allow me your email ill post u an idea see what u think

[mm34rider]

why does wattage matter on the box size. i thought it was more for volume of air being moved... such as excursion which effects that.

[ThisIs2009]

that's the perfect size actually! MAYBE 3 cu ft would be better...

[XochilangooX]

hey nice box.i need a advice am tring to make a ported box i have 2 12kicker cvr.i dont know if u seen the sealed box for silverado ext cab,if u have u can see i dont have too much space to make it happen so am makin the box 12 inchs height,like 24 width and 10 depth and am tring to do the vents circle shape how big should i cut the vents?i listen most of the time hip hop and rap music.thanks.

[barevids]

if you do that you will be very stuck!!!

for two 12"s you need the height at LEAST 13.5" and like 30 - 35" wide or the subs wont fit

trust me i learnt the hard way

im not so good with circle vents buttt i can work out the internal port area youd need roughly, and you should be able to work out how deep to make each port then

[codydgrove]

i need help building a ported lightning audio sub 12" 400w only one sub

[escalante713]

how do i make a speaker box like that for an audiobahn 300w 8 inches ???????????

[barevids]

Width: 20"

Height: 10"

Depth: 15"

Port width: 1.5"

Port length at back: 8"

Using 0.75" thick MDF

that'll give you 35hz tuning which for an 8" will deafen you with most music youre gonna listen to

If you wanna go realy low and hit 30hz or under, add 2" to the width and make the rear port length 14"

[escalante713]

thats all in inches or wat

[barevids]

yeah inches

[t42m4n]

i wana make a box for my 12" sub but i dont kno what size i sholud make it, could you plz give me sum advice on dimensions if possible, thanxz

[barevids]

hey dude, if you give me the mounting depth, xmax and RMS of the 12" sub i can do you some dimentions for an L ported or sealed

[t42m4n]

well its a 12" kenwood sub with a 1200watt peak...i realli dont care what size the enclosure is as am gona hav it in the house, but i want sumthin tht realli knocks

[barevids]

kk just quickly what type of music do u listen to most or what kinda bass you want

low and rumbly or punchy and responsive

[t42m4n]

i mostly listen to rap-hip hop- or rnb

i was lookin 4 sum hard hitin low bass

[barevids]

ok man make the width 25" and the port length 10" instead

that will give you some low ass tones

[t42m4n]

what wud the generated image look like btw ?

[barevids]

actually make one to this

Width: 24"

Height: 14"

Depth: 15"

Port Width: 1.8"

Rear port length: 9"

That'll give you a volume of 1.8cuft and a tuning of about 33hz +/-1hz depending how you build it

Will be realy loud for a 12"

If u like i can send you a generated image and the exact sizes of wood to cut out for each side etc to get it bang on perfect

[t42m4n]

yh can i have the generated image plz along with the exact sizes of the wood

[BoSoxFanSims]

i'm glad you told us the max seeing as how it matters

[gozma]

dimensions for the box?!?! would be greatly appreciated if possible. thnx

[barevids]

Width - 20.75"

Height - 8.5"

Depth - 13"

Port width - 1.4"

Port length - 13"

Vol - 0.74cuft

Tuned freq - bang on 35hz

If this is being built for a sub with under about 8-9mm xmax then i'd suggest reducing the size evenly all over. The 7kv.2 this was designed for moved similar air to a reasonable 8", which is why the box is quite large for a 6".

[gozma]

i just bought a Eu-700 so this box would be perfect, besides the fact there really aren't alot of other videos showing off there custom boxes... tho i think i might size it down to around .5-.6cu ft.

and have you got the new amp yet?

[barevids]

Yes but the eu-700 is long gone, it had numerous mechanical faliures, id never buy from elemental designs again.. dont push it too hard! Ive now got two dvc 8"s in a custom enclosure off a technics su-v550 =]

[gozma]

thnx i'll keep that in mind with this one...

[calvinyuenblinke]

That amp does about 300 watts rms or less..

[NintendoTheCoolest]

bxi 606 is not much under 600 watts RMS. its quite well rated, its the class D brutus amps that are overrated.

[subman1992]

better off getting an amp that does 350rms, no such thing as a MINIMUM rms rating lol.

but that bxi 606 does look nice

thanks for linking me to your video btw :P