Airsoft Motor: Cleaning & "BREAK-IN" HD

[haronasi]

Note that the springs are different strength on the positive and the negative terminal. Usually the Positive has the stronger one.

[BIaZeFX]

DO I GET A LONG OR SHORT MOTOR AND WHATS THE DIFFERAN S

[jamiekenta]

@BIaZeFX if you have a version III gearbox (AK series guns) you need a short type motor. if you have a version II gearbox (M4, M16, MP5), you need a long type.

[DayOfShadows5]

I REALLY dont suggest grinding down the end, it reduces the surface thats actually contacting the motor. And no, underwater break in on brushed motors are NOT difficult, just shoot some compressed air in when your done. Check out Airsoft Mechanics Forum, theres a real guide on how to do this :P

[DannyBoy465]

should the motor make a reving noise when you first plug it in like a screwdriver?

[MrSKODYs]

What is an easyer way to do this!!!

Testing the battery and motor???

[DeAthZReApEr760]

My motor was really warm, does it mean that it was broken in correctly?

[christiangd12]

is it necessary to break in a new motor?

[Moulde]

Did you measure any of the things you say it does?

And why would you sand the coal flat!?

[thebigFC]

lol... dude this video is destroying other ppls expensive motors.

great work!

Did you do know if you jump of a bridge, while shooting will increase your FPS and Joulage.

Try it.

+P

[tombradyfan77]

i need help with my motor it doesnt work when i shoot the gun it wont shoot :/

[ZEROflawgunner]

Very good video



[MishimaZero]

What motor do you recommend?

[1996XxchrisxX]

please help me. i took apart my gun and when i put it back together the gun wouldnt fire. i know its not the battery becuz it worked in my other m4 thats the same kind. the wires are connected and everything but it wont make any sound at all. please help

[CheerioMatey]

@1996XxchrisxX Check to make sure everything is connected properly. If so, and you gun still does not work; then you probably blew your fuse. You can get them at radio Shack in a 4 pack to two dollars.

Hope I helped!

[rcguy41297]

and put and stiff spring on the + side and meduim spring on the - side and dont cut the brush just get some new ones at your hobby shop

[rcguy41297]

why dont you take it apart and cut the comm (witch you use the eraser for) i race rc and we cut the comm with a lathe but if you dont have a lathe then go to your hoob shop and get comm drops it cleans the come also and while your there get some motor spray and sray the motor

[mych00]

how does this compare to wet break in?

[KuurUdesii]

When you say that you can use AA or AAA batteries as long as they are not too large, do you mean physical size or voltage? How many AA batteries would I need to equal half of a 8.4v 1500 mah battery? And can I use simple copper wiring to connect the batteries to the motor?

[miniz33]

By breaking in an electric motor you are basically letting the brushes properly seat on the communicator before a load is on the motor. When properly done it'll allow your motor to work at its maximum efficiency with the current from your battery. Which means longer life before replacement of the motor, and it could even help your ROF.

[TheAsianNinjaMan]

I am new to airsoft, and I'm very curious about how does breaking in the motor help in performance?

[baxstaber1]

i took my motor out of my m15a4 classic army and when i put it back in it stops working it works when its out can you help me

[WestMidlandAirsoft]

sounds like you have a connection problem or your missing out something do a thorough check.

[Stealthmaster15]

Thanks for the vid, very helpful. :)

My motor is pretty and fast now. :D

[SargentShooter]

Very helpfull, thanks.

[AirsoftHawaii09]

No Problem man. ^_^

Thanks to you, and all who subscribe.

[dirtysock145]

would a new motor give me better rof or fps

[adslmannen]

ROF and battery life

[dirtysock145]

thx

[exteko]

proper motor break-in is done underwater.

[AirsoftHawaii09]

Yes, but I have been recommended not to considering its a Brush motor and it would be very difficult to get all of the water out of the motor.. If you dont get it out, it will do more harm than anything..

[andromedarr]

@AirsoftHawaii09 Normally, doing the Break in in distilled water and drying it afterwards on about 40°C should be enough to get all the Water out. Or just hold the COmmutatort underwater

[jraptor7000]

thats retarded thats how u break a motor

[pcjsleader]

I do this also, but to keep the motor cool I also put a 80mm PC case fan inline and aim it at the motor. Nice vid, thanks.

[thefoshizle]

hey that is a great video but when i did the grinding on the brushes i think i did it a little to much and know it makes this weird ass screaching noise do u think i just have to break it in or what thanks a lot

[AirsoftHawaii09]

As long as they arnt less than maybe, 6-7mm long. Any shorter and I would recommend just getting a new better set. And Yes, then break the motor in. Its possible something small like a piece of dirt got into the mag and makes it whine. It shouldnt be crazy though, Could you get a video?

[thefoshizle]

ya man i think i grinded the brushes a little too short i will try to get a video because of a busy day thanks

[AirsoftHawaii09]

Oh, did you make sure you got all eraser shavings out of all the little grooves in the motor? Sometimes they collect in there and need to be scraped out with a needle.

[Maekiii]

Those g&p motors are awesome, you can get almost 3 of those in the price of 1 systema. : D

[Maekiii]

Nice vid : ) I always break in my motors before installing them to mine or my friends aeg's.

[AirsoftHawaii09]

READ DESCRIPTION ->

Hope you guys enjoy. Subscribe if you did! More vids comming!