HOW TO Clean your Vapor Brothers Whip with Boiling Water

[SPBRG]

Boiling glass, or subjecting such to extreme heat changes weakens it drastically. You're dumb. Isopropyl alcohol and salt, just like any other piece.

[vaporbros]

@SPBRG This is scientific glass. When you vape, you expose the whip to temperatures MUCH higher than the boiling point of water. (212 F Boiling versus ~315-450 vaping temps). Borosilicate will not have stress fractures like normal glass will when given amble amounts of heat stress. I agree with cleaning with ISO though.

I'm not stupid, yo.

[andyrooney12]

How do you clean the hose? Mine is made of rubber...is it safe to put that in boiling water as well?

[andyrooney12]

How often should this be done? I read somewhere that it is best to wash after each use but that sounds a bit excessive...what's the longest time I can wait before I absolutely must clean my vaporizer? Thanks.

[Wormi13]

shakakakakaaaaaw...

[Sureshot3091]

alcohol and salt will do the same thing quicker btw. just saying :)

[792218005]

Good tutorial. For anybody wonder I believe the music is Shakakraw (Don't sight me on spelling) By Infected Mushroom

[Jegermeister0]

INFECTED MUSHROOM!!!!!

WEEED!!!!!!

*head explode*

[vaporizenet]

Awesome tutorial the music owns too.

[Eskiiizor]

where to buy it?

[mad3rab]

Thank you, Great video for a great product. I just have a few questions.

Do you suggest any particular type of dish soap?

Is it normal for some accumulation of herb to pass through the screen? If so, is there any way to place a screen on the mouthpiece of the whip

[ADAMSCHUTTE]

i double screen. use acetone, then boil.

[crunkman407]

did you take the screen out? I just got mine, and my friend sais its a pain in the ass to replace the 1st time.

[seller88rs]

I have a whip that is almost the same. It is indeed a pain in the ass to get a screen back in the whip. I like to use 2 gold screens that are thin to replace the first one that originally came with the whip. If you use rubbing alcohol and salt that also works well inside of a zip lock bag.

[IzBiggz]

could you just pull the wip off the hose with out cutting it

[ChefFlick]

yes you can LzBiggz, just dip the entire end in boiling water, hold it there to make sure the hose doesn't hang down the sides and come in contact with the heat element. once soft, its easy to remove. You need to do the same thing to the hose to get it back on.

[vaporbros]

You are in 6th grade; right?

Remember to capitalize the first word of every sentence. Also; add a period at the end of the sentence to end the sentence.

And I am assuming heed = need.

Thanks for the comment though.

[IzBiggz]

LMFAOOOOO i love how you fixed this idiots entire efforts!!!!

[lstruggy]

start w 350 then adjust accordingly...me i use 348 for the minty non burnt flava

[xaviermockingbird]

Cant you just pull off your hose instead of cutting it every time you want to clean your whip?

[vaporbros]

Totally. Just wanna make sure people don't break their whip though.

[Tokinvapes]

Ha, awesoem song, and such a simple way to clean a whip, i never thought of doign this.

[Timan123]

is it easy to stick the hose back on the whip after cutting it?

[vaporbros]

Very easy. If you are having difficulty you can use something like Aloe Vera or lotion to help glide the hows back on the whip. Hope this helps!

[JuGgala22]

I use Clean & clear blackheads cleaner! LOL works super great! thanks to my sister! doesnt even need a lot!

[CDXXGOD]

alcohol and salt works just as good =]

[Ozarkman101]

Look guys get you some 90 proof or higher rubbing alcohol. (80 will work but take longer to dry)

Take out the screen. ( I burn it to clean it)

Put the alcohol in the whole whip together.just about half shot glass full.

Then Shake shake shake for about a minute. Then pour what you have left out on a glass or mirror and let dry. Scrape with a razor and you will have pipe hash.

Enjoy

[Subhuman80]

Hot knife the screen.

[torn2pieces420]

What is the best temp to have it on? I keep getting burnt popcorn taste!

[vaporbros]

Step One: Make sure you have a Vapor Brothers Vape, not a knock off style one.

Step Two: Set to 12 o'clock or lower. Should take only 2-3 minutes to warm up.

Step Three: You control the temp by how fast you inhale. Slower inhale equals a hotter hit. Faster inhale is a cooler hit.

[Dizzletrout]

Thanks for the Information Vid's about Vaporbros vaporizer, bought one finally. Just wondering what you set yours at, also if you should wait a min before another hit. I have the HF one like you but the first hits are always the best even when its the same herb over and over again. Thanks David

[HDL2112]

what is the best way to scrape out honey to save it? I have tried it with a bamboo stick and it does not work well.

[hurricanebros]

use a paper clip to get the resin it works great

[Adragon1]

I've been a fan of "Formula 420" for a while now. Great on all glass. A little pricey but, it does work. I gotta try your method and see if I get the same results. What do you do with the honey? Ignite or vape?

[connorbag]

what is the song on this video pleaseeeee?

x

[gonejadaemon]

Infected Mushroom - Shakawkaw

:D!

I am buying one of these vapes soon. I have used a friend's Vaporbrothers many times before, and have loved it.

[jibar07]

thanks dude, the people over at the headshop closest to me don't know shit. I asked them how to clean a whip, but they said try a small brush to clean it. THEY DIDN'T EVEN KNOW HOW TO CHANGE THE FILTER. That place sux, but they have everything i need. I love my vap btw, it is amazing. Thank you again.

[thegoodrevtim]

cheers! great vid

[AngelMiami]

thanks bro, that was very helpful. Can't wait to smoke that honey I just scrapped ;)

[NoPantsToma]

after you cut the tubing do you need to buy more from the website, or could you just get it from a hardware store, or would the tubing bought from a hardware store be toxic if used for vapoirzing?

[sandiferous30]

Can you not use the same tube once cut?

[vaporbros]

I don't understand why people don't understand that you CAN use the same hose after you clean the glass whip. You are only cutting a quarter inch off of the hose, and the hose is perfectly fine to use a second, third, fourth, fifth, etc time.

[sandiferous30]

That's what I figured.. Love my unit BTW

[t0ddsmith]

I don't understand why you would cut the tube in the first place...just run some soapy water where the tube connects to the whip and a couple of strategic pulls and it's off...and whalla! no need to buy new tubing!

[vaporbros]

You. Don't. Need. To. Buy. New. Tubing. Period.

Just reuse the same tubing you cut. Simple.

[HowellAtTheMoon15]

Yeah, but how do you reattach the hose after you cut it?!?! I cut my hose like you told me to in the video, and now I have no clue how to get it back together!

please help me

[vaporbros]

Just stick it back on. If you are having trouble just add a little aloe vera or another lubricant to help ease the hose back on.

[seller88rs]

I have cleaned my whip over 5 times.  Run the plastic tube under hot water for a couple of minutes and it will be easier to put on.

[GitanaGold]

Cool video, I have been putting my whip in some hot water and to soak and washing it in warm soapy water afterwards works well too, but I will try that next time. But what I wanna know about is what do you do with that saved honey you scraped out of the whip? Can you show us a video of that please? Thanks! I Love Vapour Brothers!