Turnigy FlySky iMax Eurgle 9X Switch Error

[VETTE811]

THANKS FOR ALL YOUR INFORMATIVE VIDEOS... I HAVE THE FLY SKY 9 AND WAS WONDERING WHAT YOU WOULD SUGGEST THE DUAL RATES AND EXPO SETTINGS TO BE SET AT THE HIGH RATE AND LOW RATE..... THANKS

[metal4ever1965]

when i operate the throttle, my flap servos move up and down, and i have them correctly plugged in. also, my landing gear wont open no matter what toggle switch i use. pls help

[inthetubedeep]

G'day! I have been using the JR9503, and just got the Turnigy 9x as a back up (or maybe primary Tx since I've been losing signal over the ocean and losing planes!)- looks like a great radio-- but I can't figure out how to program it! I am trying to assign the Aux3 pos switch to operate flaps, any idea!? Thanks!

[KardanAutos]

Thank you very much! Just got my turnigy 9x and was almost about to panic!

[000006rapture]

Hi, Bruce! Question for yah? Do you think that my JR SX600 is compatible in master slave trainer mode with the Turnigy 9x V2 I just got from hobbyking with the normal jack cable. I do not want to burn out anything? Thanks in advance.

[xjet]

@000006rapture Unfortunately the JR uses different channel assignments (ie: the JR throttle is the 9X aileron and the JR aileron is the 9X elevator) so it's not really practical to use them together unless you reflash the 9X software to the excellent ER9X freeware. I'll be doing a video on performing this reflash in the new year.

[000006rapture]

@xjet Thanks for your speedy reply, Bruce. I'm about to order the USBasp AVR Programming Device from hobbyking to do the flashing of the radio.

[TheStevestewart23]

thanks saved me alot of time trying to find the problem

[polymeb]

Gracias idolo!!!!

[EduBrasil2007]

obrigado por sua honestidade. fiz o que você explicou e deu certo, muito obrigado. continue com vídeos assim. abraço, edu

[MOJONIXION]

slow down and take a breath...

[sidmar2005]

thank you! I have switch error in tuning 9x tx.

[Nexnz]

Cheers!



[drbazik]

thx sooo nice ;) its ok for my

[sergionew7]

Is a another radio transmitter brand I can use for fpv plane 2km range? thank-you

[sergionew7]

How I can to convert it to the FrSky 2.4 system? Please

What I have to do because I'm new in this hobby

[xjet]

@sergionew7 You are best to go to the forums at rcmodelreviews and ask the questions there.

[sergionew7]

So do you recommend me this radio transmitter for fpv plane

Around 2km? Thank-you

[xjet]

@sergionew7 I would recommend it only if you convert it to the FrSky 2.4 system because for FPV use it pays to have a good failsafe capability and the standard 9X radio does not have failsafe.

[sergionew7]

what is fly range for this radio ?

[xjet]

@sergionew7 About 2 kilometers

[muffdriver69]

You look and sound like my Architect lecturer at Victoria University. Must be long lost brother. LOL.

[LTF85199]

Public announcement lolz.. thanks

[TheBobby1373]

thanks you .hepled me

[aussietrevor]

thanks mate

you .hepled me tremedously will moniter you site closely good work

trevor adelaide

[wookswealthy]

hi i am looking to get one of these and was wondering if it will bind to spectrum rx????

[RCModelReviews]

@wookswealthy No they won't. In their standard form they will only bind with the Turnigy 8 channel, HobbyKing 6 channel and other V2 FlySky receivers. That's not a bad thing -- those receivers are very cheap and offer better interference rejection than any of the Spektrum DSM2 equipment.

[PatBALEX]

Thanks...Bought this radio 2 mounths ago....No instructions, down loaded some on line...Ran into this problem...But after thinking about it, fugured it out...Every little bit helps...

[HeadShot360IN]

Is it better to buy the FlySky version than the Turnigy version? It looks like the flysky has an FM Antenna, and then you can easily swap out the 2.4ghz cartrige, without having to wire up the new module to the Turnigy antenna?

[rigfios]

Excelente explicação para resolver o problema quando se liga o radio pela primeira vez e apresenta o erro SWITCH ERROR.

[rigfios]

Excelente explicação para resolver o problema quando se liga o radio pela primeira vez e apresenta o erro SWICH ERROR.

[mikees666]

thanks alot dude,i had exatly that prob and now it works. unbeliveble that they not telling this in the manual , but again tanks from denmark

[JurrePs3]

How To fix this even easier : watch?v=Z4zGRr86Esc

it was in the manual!

[dsldrvr69]

i want one but , every time i want something cheap , the price keeps doubling, must be a good radio!

[MrSambahans]

Many thanks it helped me a lot

[Colombiandaniel]

hey there i really like the appearance of your imax 9x where did you get those knobs are they cnc? i would really like knobs like those for my transmitter.

[mvdplas24xs]

Thanks for the help. This spared me a lot of time!

[anutpeach]

thanks man!

[mmmartin261]

you are helpful, very helpful, my friend. problem SOLVED!!!



[Maoacostavela]

Good afternoon. What is the role of other additional antenna I have a Flysky. and if I could give the address of the store where you bought exactly the same as samples in this video. Thanks

[easycretor]

Thanks for the video.

[BARDONICHI]

Must thank you for switch info tried most things to stop the error, pretty close to chucking it off our balcony ,you saved a radio set today BASHY

[biped19]

Just subscribed. Great reviews and mods!

[obooth]

Hey mate, you're a legend. Sure enough manual says NOTHING about this silly detail. A gentleman and a scholar sir!

[MrAllioupe]

Publix service announcement. You're darn right. Thanks so much. I look forward each week to your shows!

[hikaru12512501]

To see your image, it was saved very much.

My transmitter was troubled with switch error, too.

Thank you.

[garyeve100]

Thank you!!!

[oellinass]

thanks a lot. Love your accent.

[Burner11111]

Thank you a lot. This was good information

[mikgus]

Thank you! remeberd this video now when my new radio keept beeping at me. Do you still use it and do you use the standard firmware or any of the custom ones?

[Eugensdiet]

Thanks, You saved me a lot of grief.

[alessandroarte]

wohh GOD Bless YOU.!!!!!!!hahahah!

[forumboards360]

awesome video man!

[anothershakey]

love you man! ;) thanks a lot! i was just about to open my window and let it fly!

[ripper9191]

hey man my transmitter have all switch back and it still having the same song

[ripper9191]

i wan to remove motor control from the right to the left side u think will work? plz give a idea

[ripper9191]

hey bro i have a big question because i have one transmitter but is mode1 can i change the control to make a mode2?

[RCModelReviews]

@ripper9191 Yes, changing modes is pretty easy and I'll be doing a video showing how to do this very soon. It's just a case of moving a spring and the ratchet from between sticks and then selecting the required mode in the menus.

[redline022]

@RCModelReviews in regard to the 9x v2, is there any difference between the mode 1 and 2 apart from the knob spring? (eg im considering just buying a mode 1 and converting it since mode 2 seems to be out of stock more often :) )

[ripper9191]

is this a good radio i don't wanna waste my money

[xjet]

@ripper9191 It is reviewed at RCModelReviews

[lerlo]

All transmitters does that. Its a safety feature.

[MrDancelover71]

Thanks! I was very confused until I found your movie :)

[MrDancelover71]

Thanks! I was very confused until I found your movie :)

[FlyHighRC386]

is this version 1 or 2, and if so does the version two come with a module or do i need to get one also can it be used for 72/35MHZ with it aerial. Thanks mate

[sshukri0]

Hello sir, I was wondering if you knew of a 2.4 GHZ module I could purchase for this transmitter that would enable me to use my 2.4 GHZ HK- TR6A receivers.

Any help would be appreciated.

Thanks

[kagoshimadavid]

i think he uses his TX to lure little boys to his car for free candy :-) fucking sanat at it again ! 

[xjet]

@kagoshimadavid Thanks for your kind words -- yeah, I get real busy around Christmas (ho ho ho).

[ultras0]

is it Worth the money?

or just buy a hk 6 ch rx & tx?

I read the review..

[vanepico]

It is so you don't turn your helicopter on in throttle hold or idle up.

[jandirks]

Very useful information!

[blackmuzzle]

This is actually a good feature. I do the same on my pre-power-on checks: All switches forward. It's the safe and hold position for all my stuff, be that helicopters planes.

[startazz]

Hi mate, what about that tx and maybe an rx to go with it as the give away comp?? or another set you think is a good but this is only a suggestion and i'm sure we would all be happy with what ever you want to put in as it can only help someone out in the long run ;-) 5*

[RCModelReviews]

@startazz Unfortunately I had to pay for the 9X with my hard-earned cash and I'm using it very regularly as my main RC transmitter right now so I'm keeping it. In fact, I'm looking to buy another because I think I may have a go at rewriting the software to fix the bugs and add some extra features.

[startazz]

@RCModelReviews Thats ok mate and i don't blame you, what ever you want to put in i'm sure we will all be happy mate and i'm sure you won't have any trouble sorting out a new one with rewriting the software,i just wish i had your skills mate ;-)

[VasilakisMichalis]

@RCModelReviews, Where can I find the firmware for the 9X?

[f104d]

@RCModelReviews

thanks very much for the information.

regards

Brett

[KYIMGMG]

Hi,

Would you like to test the range for this radio ??

Please.

[RCModelReviews]

@KYIMGMG The range depends on the RF module and receivers being used.

With the FlySky module I found this system to be a "medium range" one, offering about 400m of range on the ground that would become more like 800m in the air.

With better modules/receivers the range will be much greater.

[wallaguest1]

@RCModelReviews

Hi,

offerinc 400 m of range on the ground?

but in your web i read you said:

"Placing the transmitter approximately 1 meter above the ground, I walked the length of our local airfield (around 1,000 meters) with receiver in-hand."

so at ground its 1000m of range or 400m?

thnksss

[RCModelReviews]

@wallaguest1 As I said, it depends on what module/receiver you're using with this transmitter as to what range you get. With a good module/receiver you'll get well over 1,000m but with the original FlySky module/receiver the range is less.

[RCModelReviews]

@KYIMGMG There is a full review of the 9X on the RCModelReviews website.