Using TC Electronic effects processors in guitar amplifier loops - part 1

[em0p0wa]

can you connect TWO amps at the same time to the G system?

per say if i want a clean tone for preset one, have the channel one of a fender in there, for preset 2, have a blues drive of that same fender

then for preset 3 have the clean pushed sound of a mesa dual rect, for preset 4 the vintage on channel two of the same mesa dual rect and for preset 5 the modern mode on channel 3,

Can you navigate between the channels of the two amps while both are hooked up in the g system?

[tcelectronic]

@em0p0wa You can actually connect up to three amps to g system. but for dual sound you can route the stuff to left out for one amp and right out on another amp. G-system can also switch channels on both amps. just mute output on the unused side (right or left) by setting it to zero.

[Rexusmetal]

Hi Tc electronic, I have a Marshall Jcm 800 2203 Kerry King signature head and the fact is that my amp doesn't have an effects loop, and i want to buy the G-major 2 processor, the question is if i can connect the g-major in the amp´s input with no problem, and still sounding good? this is recommendable? and whats the difference?.

Thanks.

[tcelectronic]

@Rexusmetal Yes you can use the G-major 2 straight into the nice Kerry King signature amp's input and it will sound good. An effect loop gives you the advantage that you can choose between setting your effect pre- or post the preamp, with a serial effect loop, or with a parallel effect loop you can blend in the effect signal with your amps preamp signal. Connecting the G-Major 2 straight into your amps input gives you a pre- preamp setup. please refer to the manual for further informations

[Sh3lz123]

WHAT DOES ALL THIS CRAP MEAN?????!!!!!?????!!!!

[nephilymbass1]

I play bass and on my pre-amp you can select either series or parellel for the FX loop. Kinda funny that a bass pre has that but not guitar amps.

[tomrogermarkas]

When i turn off the volume on my amp i still have sound coming out of my speakers. The loop It's series, passive type.

The sound is "far away"(very low volume) and distorted. When i turn up the amp volume its sounds ok

This happens when i have 2 amps connected to the Major2. Any ideas??

[homero0787]

Tcelectronic, I have a g- system, i use it with a combo bogner shiva. How do I know is the Bogner Shiva is Parallel or serial?. I also hook up the Gsystem so i can change the channels of the amplifier from the G system, the problem I have is when i plug the G system to the amp to change channels, the EQ of the clean channel freeze and i cant eq the clean channel.

Hope you can help me out with my questions

Thanks.

Homero Gallardo

[tcelectronic]

@homero0787 - To check whether the loop is truly serial: plug a jack in the loop send and nothing in the loop return. If you still have sound the loop is parallel, otherwise it's serial.

Channel switching + EQ working. G-Sys channel switching works on MANY amplifiers, - but not all. Before giving up I suggest you try ALL the relay combinations in G-Sys that give the clean channel. If there's no luck I suggest you get a schematic from Shiva on ch. swithing , then contact TC Electronic support

[crguti]

Is the g major 2 much better than g major 1?

Should I get the g major 2 instead of 1?

[Wildchild880]

ive got a gmajor 2 it is superb

[smk2k2]

i didnt understand a damn thing there =)

[odissey04]

Does nova system have Kill Dry function???Thats my problem with nova System im using in the front.

Thanks

[DarkVelizar]

Thank you for this TC great exlenation!

[BBBNC5123]

Wooo!!!

First view and rating!! Loving TC's work. Can't wait to get a g-system.