EASY Untethered 4.3.3 Jailbreak iPhone 4, 3GS, iPod Touch 4G, 3G, iPad w/ Redsn0w

[thefalcon217]

Awesome! Very good!! Thanks! Although i did have to do an internet search to work out the boot rom version, you kinda missed this step in your vid, but found the info easy enough. Cheers!

[tonytung1984]

Thanks it works perfect one shot lol

[JASONMUYON]

is wifi connection between iphone and pc required?

[UtterlyApple]

@JASONMUYON to download the software, yes

[Twist3dSavi0r]

great video. followed it to the letter to jailbreak my ipod touch 4g. worked perfectly. thanks!

[babyblueturttle98]

i couldent get to yhur site!! :(

[UtterlyApple]

@babyblueturttle98 try it again, it was working fine for me

[wishal35]

do this work on iphone 3g 4.2.1

[shawna72ful]

After alot of frustration I finally found a software that worked unlocking my iphone 4 at >>>>UNLOCKIPHONEIOS5(DOT)INFO. It works up to new ios5 firmwares.

[TheNubgamer1]

uploading Ramdisk why is taking so long ? lol

[5080shark]

thank a lot it was very easy

[UtterlyApple]

@5080shark Thanks, glad I could help

[rangeley826]

can you "unlock" the iphone after this jailbreak ? just making sure... Thanks

[UtterlyApple]

@rangeley826 You should be able to, just download ultrasnow in cydia

[f4ll3nsp1r1t]

why is my ipod not opening now?? its off for a long time now plz help me....

[UtterlyApple]

@f4ll3nsp1r1t did you try turning it back on?

[f4ll3nsp1r1t]

do my idevice need to be charging when its connected to my pc cos i use a usb hub that doesnt charge it plz answer me so i can jailbreak it :D thanks in advance ^^

[UtterlyApple]

@f4ll3nsp1r1t No you doesn't have to charge, just make sure that you have enough battery though

[beechyy]

i used jalibreak but my sim still isnt working. can u help??

[UtterlyApple]

@beechyy take your sim out and run redsn0w again but this time choose just boot tethered. let me know if it works. ~Daniel

[IAmTheCOGfather]

when i downloaded Redsn0w my mac said "you cannot open this as you dont have the right architecture"..? HELP ME :L

[UtterlyApple]

@IAmTheCOGfather It sounds like you may have downloaded the the windows version of redsnow.....if not then you may need to upadate your mac

[Missflipg4u]

Hey i have an iphone 4 4.3.3, and its unlocked with the gevey sim but i need it jailbroken but i been told that the untethered jailbreak doesnt work, and i wanted to know before i try this way that if this doesnt work or jailbreak my phone will it harm my phone in any way? Will it mess it up?

[datojlett]

if you updated your idevice in itunes (ios 4.3.5) and want it untethered get the new redsn0w 2.8b9 from

redsn0w.blinkweb.com

thumbs up if it worked

[TopZAirborne]

Lol this is a bootlogo

[narutosas007]

does anyone knows why my cydia is talking forvere

[billlowe07]

respect u mate !! works like a charm ;)

[UtterlyApple]

@billlowe07 Thanks, glad I could help!

[narutosas007]

@UtterlyApple how long will the cydia load mine is taking for ever HELP

[757LILBIT]

i did it and it went str8 to recovery mode

[UtterlyApple]

@757LILBIT Did this happen when had your iDevice hooked up to your computer and ran redsnow?

[jachvideos]

It stills tethered here .-.

[xXR3GANXx]

this work for mc models ?

[UtterlyApple]

@xXR3GANXx I'm not sure what you mean by mc models, I've never heard of that, can you explain?

[UtterlyApple]

@xXR3GANXx yes this works for mc models

[thingsandstuff26]

Anyone gettting stuck at the Uploading ram disk screen?

[UtterlyApple]

@thingsandstuff26 Are you using windows? If so, try this open task manager, right click on Redsn0w.exe process, then select Affinity. Set it to CPU 1 only. Now try jailbreaking your device. Let me know if that helps. Thanks for the question. ~Daniel

[DannyFromDaBloc]

Worked for me. US AT&T iPhone 4. Redsn0w is by far the easiest one. Skip sn0wbreeze, greenp0ison...they're all a ton more steps and don't work.

Thanks!

[UtterlyApple]

@DannyFromDaBloc Glad I could help, and I agree Redsn0w is one of the easiest.

[8DDDDDDDDDDD]

does this work with canadian iphones? i have no idea if my phone is gsm or not..

[UtterlyApple]

@8DDDDDDDDDDD Yes this will work on a canadian iphone. Thanks for the question. ~Daniel

[360strongALKQN]

ii did everything. but redsn0w said i didnt have the correct version .(which i do)???any help?

[UtterlyApple]

@360strongALKQN did you check to see what firmware you have installed on your device before you opened redsnow? Check that under Settings>General>About it will tell you what firmware you have installed there. This video only works for firmware 4.3.3. Thanks for the question. ~Daniel

[danedavey15]

hey man i downloaded the firmware and redsnow and it wont let me open the firmware through redsnow

[UtterlyApple]

@danedavey15 Hey make sure that you unzipped the file first, before trying to open it with redsnow. After that make sure the firmware has .ispw on the end. Let me know how it goes. Thanks for the question. ~Daniel

[macintorsk]

this is just for 4.3.3

[UtterlyApple]

@macintorsk Yes you are correct.

[9819772086]

Good one!!! It worked for me......Thanks for all your help....

[UtterlyApple]

@9819772086 Hey thanks for the feedback, glad I could help!

[tapiocaai]

im having a problem with the cydia. its been "preparing filesystem" for about 30 minutes. is that normal?

[UtterlyApple]

@tapiocaai Exit out of cydia and restart your phone and then try it again, this should do it. If it doesn't, let me know. Thanks for the question. ~Daniel

[G0DzWARRIORz]

hi i have a white iphone 4 16gb version 4.3.3 baseband 04.10.01 and im with o2 IRL will this work?? and how do i download these things on windwos 7 anyone got step by step ... help really appreciated thanks

[UtterlyApple]

@G0DzWARRIORz I'm not sure what o2 IRL is? But yeah other than that it should work. It's the xact same on windows 7 as it is on a mac, the programs that you use to download are exactly the same, just follow the guide and you should have no problem. If you do, then let me know. Hope this helps, thanks for the question. ~Daniel

[aragon1301]

hey, i cannot download the firmware, it opens like a read file, i dont open like the one you have, do i need something to open the firmware???

[UtterlyApple]

@aragon1301 did you download redsn0w also?

[KMaMaa]

i did this jailbreeak, and it worked nicely except it usually shows the wrong battery percentage, like one time it was at 30%, and in a second went to 2% and died immediately. HELP PLEASE!

[UtterlyApple]

@KMaMaa Here's what you need to do: Do a hard reset, hold both the Top/Power button and Home button at the same time, for about 15 seconds, just keep holding both buttons until the iPhone restarts. This should fix your battery problem. Thanks for the question! ~Daniel

[vanhstudent]

PLEAS READ HERE!! Hey guys I had the same issue on a iPod 4, telling me i was not in DFU mode. I solved the problem using the newer usb cable I guess it is 2.0, I can tell because it is thicker than the old ones, hope this helps.

[klingon95]

When I open the 4.3.3 firmware it says it unrecognized it

[MrAlexhockey1]

if i use a iphone will i lost my contacts ?

[Encraftonline]

@MrAlexhockey1 its is automatically backed up by iTunes, however you wanna make sure, there are other ways of backing up manually.

[KMaMaa]

how come my iphone dies at around 30%?

i jailbroke it and when it shows 30% left, it dies, but i'm pretty sure all it's doing is showing the incorrect battery. i have lots of things i don't want to remove so does anyone know whats wrong? help please :D!

[UtterlyApple]

@KMaMaa Here's what you need to do: Do a hard reset, hold both the Top/Power button and Home button at the same time, for about 15 seconds, just keep holding both buttons until the iPhone restarts. This should fix your battery problem. Thanks for the question! ~Daniel

[nubetube513]

The link sends me to a weird page, file dropper and no mention of red snow but a lot of download buttons, using a Mac, better solution anyone?

[UtterlyApple]

@nubetube513 that is the correct link, I put it there myself, don't worry it's not spam or anything. Click on the button that says "Downlaod this file" right below the URL. Thanks for the question. ~Daniel

[UtterlyApple]

@UtterlyApple UPDATE: The links are direct downloads now, meaning that it will immediately start downloading instead of going to another page. ~Daniel

[jaysr123]

its telling me that i was not in dfu mode.... but i did all the steps correctly... ive tried at least 15 times.... i dont know what to do

[UtterlyApple]

@jaysr123 Did you turn your device off before you ran redsnow?

[jaysr123]

@UtterlyApple i dont think so but i might have

[UtterlyApple]

@talebkiller Turn off your device, connect your device, open redsnow, find your firmware, then there should be an option that says "just boot tethered" click on that option and follow the steps from there. That should fix it, if not let me know. Thanks, Daniel.

[mackshah]

So i downloaded the 4.3.3 firmware and now when i open redsnow and go to browse its not picking up any ipsw file??? helpppppp i just spent over an hour to download the firmware :(

[UtterlyApple]

@mackshah you have to remember the folder that your downloads go into, then hit browse on redsow and find that folder and find the file

[philiphowl8]

Will this work on 04.10.1 and 4.3 (8f190) on 3 network Ireland, and will it not unlock my phone as I just want to jailbreak it, pls help, thanks

[UtterlyApple]

@philiphowl8 it will work on 4.3.3 you will have to upgrade to 4.3.3 for it to work

[redneckgunman08]

same thing. works for a bit and turns off and gets stuck at logo screen

[UtterlyApple]

@redneckgunman08 @talebkiller Turn off your device, connect your device, open redsnow, find your firmware, then there should be an option that says "just boot tethered" click on that option and follow the steps from there. That should fix it, if not let me know. Thanks, Daniel.

[redneckgunman08]

it worked for about 3 hours utterly then i was just replying to a txt and my screen flashed and my phone turned off. then when it tried to turn back on it got caught at the logo screen and i had to take an hour to restore and back it up again. any ideas on what the issue is?

[UtterlyApple]

@redneckgunman08 Try to rejailbreak it but this time after it is jailbroken make sure you restart your phone again before you do anything else, let me know how it goes. Thanks, Daniel.

[YouDoctorTube]

When ever i open up Red Snow and try to compress the 4.3.3 iPhone4 firmware it says it can't be compressed. Please help! and my phone is from AT&T and im using windows.

[omgitskittywitty]

it works!!!

[redneckgunman08]

i got a question utterly. ive tried jailbreaking my iphone 4 twice and both times it works but after u open cydia and u install somethin and it says reboot device. i click it and the apple logo comes up and it stays there then i have to go recover and restore my phone. any solutions to this reappearing issue?

[UtterlyApple]

@redneckgunman08 Ok after you do the jailbreak, don't open cydia immediately. Turn your phone off first and turn it back on. Make sure it doesn't get stuck at the boot screen there. If it does make sure you wait at least 7min to make sure it doesn't get past the boot screen. If it does get past the boot screen, then go into cydia and let it do its thing and reboot. Let me know how it goes. Thanks, Daniel.

[cwpwildcat]

it says i cant open redsnow bcuz its zipped and compressed

[UtterlyApple]

@cwpwildcat are you using windows or mac?

[UtterlyApple]

@cwpwildcat are you using windows or mac?

[cwpwildcat]

@UtterlyApple im using windows and i have a 4G ipod touch and when i download redsnow and try to open the folder it says i cant cuz its compressed and zipped

[AllMusicBro]

I NEED A STRAIGHT ANSWER PLEASE! if i buy a iPhone 3g at&t and i jailbreak it and unlock it can i use it on verizon?!?!?! please help

[UtterlyApple]

@AllMusicBro Sorry you cannot they are 2 totally different networks and run on completely different technology. Thanks for the question, Daniel.

[EmilliosRage818661]

How do I find the Lego thingy??

[UtterlyApple]

@EmilliosRage818661 What lego thing are you talking about?

[EmilliosRage818661]

Is anyone awake right now that can give me a walk through pleaseee

[JVTTP]

nvm i got it

[JVTTP]

what happen if you have a newer model of iPhone 3GS?

can you still jailbreak it?

[UtterlyApple]

@JVTTP Yes you can jailbreak it

[onemanarmy40002000]

@UtterlyApple It worked after i restored the phone again. i tried to cancel my posting here, but I guess it didn't work. Thx.

[devinglenj]

It gets stuck at "Exploting with limera1n"

[UtterlyApple]

@devinglenj Are you jailbreaking an AT&T iPhone or a Verizon iPhone? if you are jailbreaking an AT&T iPhone then you should be using redsn0w to do it, there is a link in the description for it. Thanks, Daniel

[devinglenj]

@UtterlyApple It's an an AT&T. 3G

[UtterlyApple]

@devinglenj Are you saying that you have an iPhone 3G? If so then it can't be jailbroken on 4.3.3. The last firmware that could be jailbroken on iPhone 3G was 4.2.1. If you have any more questions/problems feel free to post them and I will help resolve them. Thanks, Daniel.

[devinglenj]

@UtterlyApple Alright, Thank's.

[lrmcclel]

awesome!! thanks so much! if i can do this ANYONE can!

also, do this unlock too?  is unlock and jailbreak the same thing?

[lrmcclel]

awesome!! thanks so much! if i can do this ANYONE can!

[bthugsxtian]

thanks its worked

[onemanarmy40002000]

Cydia does not work on my iphone 3gs after jailbreaking.

[bthugsxtian]

is this working please answer me

[UtterlyApple]

@bthugsxtian yes this is working

[justinbieerisgay]

it starts to downlod redsnow but then it stops?

and is it supposes to take a long time for the iphone 4 firmware?

[UtterlyApple]

@justinbieerisgay Which redsn0w were you having trouble downloading, win or mac? Can anyone else tell me if they are having problems downloading please. Oh and the iPhone firmware will take a while to download, it's almost 300mb. If you have any more questions please post them. Thanks, Daniel.

[justinbieerisgay]

@UtterlyApple

[SlicKBaKK]

how do i extract the files from the folder on windows 7

im using winrar but it doesnt show an ipsw it shows a hole bunch of files and a folder but its not in the folder either

[UtterlyApple]

@SlicKBaKK Make sure that you download redsn0w AND the firmware for your device. Click on the device you have to download the firmware for it. If you have any more questions/problems please post theme in the comment section and I will answer them ASAP. Thanks

[JustNHavoc]

Why do you post things that don't work? It's pretty annoying.

[UtterlyApple]

@JustNHavoc What are you having problems with?