Not a whole lot honestly. The car has Megan Racing fully adjustable track spec coilovers with front camber plates, noltec endlinks, rear camber bolts and strut tower braces. That's about all I recall for the suspension :)
It's lowered a bit, maybe 1.5 inches? It could certainly be dropped much lower on this suspension, but I haven't felt the need to... Right now, I think the tires would rub if I dropped it much more.
Thanks so much! The catback is a Borla hush. I've been very happy with it. I've had it on the car for a few years now and it's slightly louder than when I initially put it on now (common change for an exhaust system over time). It's great around town and on the highway. I've never been hassled due to the exhaust system. It doesn't drone either, which is great. However, it still has a nice rumble when I get on it. I'm very pleased with it. :)
I have got "3 full HKS legamax system including headers. Actually i am very proud of it and pleased. But in Turkey, cops are very rough about their sound and outlook. So i wanna change it but i can't decide. Is it 3"? Are they high flow?
Yeah, it's full 3inch, as is the rotated mount downpipe I made for the car. The car's making over 500hp at the crank through this exhaust so it's definitely reasonably high flow. For the most part, all of the 3inch systems on the market are similar in terms of flow. and will put down within around 5hp of each other on the dyno I suspect.
wheels are 18x9 et35. With the 285's the poke out just a bit past the fenders, I'm going to go about 255 or 265 for tires next time which will hopefully get the tires just flush with the wheel well :)
Yup, it will be a direct bolt up to the transmission. All of the EJ series motors are essentially interchangeable with respect to the transmissions :) The EJ207 is a very nice motor, good luck with the install!
wow...truly truly well rounded built wrx. great work right there. wheel fitment is sexy as hell.and ive never seen a rex get so sideways and still going WOT through gears!
which exhaust is this
CoBBSubaruSTI 7 months ago
@CoBBSubaruSTI
Borla hush
huckster107 4 months ago
no hood scoop.. nice...
rpaul247 9 months ago
Man. It's me again :)
Do you change the rear subframe, transmission cradle and crossmember ? Does Sti fit into WRX?
murproject 1 year ago
torque steer? I saw that..... lol
funitsu 2 years ago
haha, oh yeah :)
huckster107 1 year ago
What wheels are those and what size and offset do u guys think would be ideal for a 07 wrx? Very much appreciated.
omgman1337 2 years ago
18x9 geforces. youll need some fenderwork.
KuostA 2 years ago
lol, why do this on hoosiers IN THE RAIN? nice car tho lol
sujorosa 2 years ago
Just happened to be what I had on the car when I had a chance to go out with the camera...
Car gets wheel spin in 3rd with the star specs on too...
huckster107 2 years ago
one word NICE!!!
sumopower2009 2 years ago
Thanks!
huckster107 2 years ago
SIC subie man, just curious, i saw that the wheels are 18-9 with 285's. i love the look. what do you have done suspension wise???
raziel345 2 years ago
Not a whole lot honestly. The car has Megan Racing fully adjustable track spec coilovers with front camber plates, noltec endlinks, rear camber bolts and strut tower braces. That's about all I recall for the suspension :)
huckster107 2 years ago
How about hieght wise, lowered at all or?
raziel345 2 years ago
It's lowered a bit, maybe 1.5 inches? It could certainly be dropped much lower on this suspension, but I haven't felt the need to... Right now, I think the tires would rub if I dropped it much more.
huckster107 2 years ago
Ya thats what i was worried about, ill just do the wheels first then figure out my droppage :P thanx for the info man.
raziel345 2 years ago
Your exhaust system seems to be very legal. Which product is it ? Beautiful car.
murproject 2 years ago
Thanks so much! The catback is a Borla hush. I've been very happy with it. I've had it on the car for a few years now and it's slightly louder than when I initially put it on now (common change for an exhaust system over time). It's great around town and on the highway. I've never been hassled due to the exhaust system. It doesn't drone either, which is great. However, it still has a nice rumble when I get on it. I'm very pleased with it. :)
huckster107 2 years ago
I have got "3 full HKS legamax system including headers. Actually i am very proud of it and pleased. But in Turkey, cops are very rough about their sound and outlook. So i wanna change it but i can't decide. Is it 3"? Are they high flow?
murproject 2 years ago
Yeah, it's full 3inch, as is the rotated mount downpipe I made for the car. The car's making over 500hp at the crank through this exhaust so it's definitely reasonably high flow. For the most part, all of the 3inch systems on the market are similar in terms of flow. and will put down within around 5hp of each other on the dyno I suspect.
huckster107 2 years ago
Great video Reid :)
sambarros 2 years ago
Thanks Sam :)
huckster107 2 years ago
Sick car, how wide are those wheels btw?
BrianTehPirate 2 years ago
wheels are 18x9 et35. With the 285's the poke out just a bit past the fenders, I'm going to go about 255 or 265 for tires next time which will hopefully get the tires just flush with the wheel well :)
huckster107 2 years ago
I'm not totally sure, but won't the EJ207 bolt on to the MY02 transmission with no problems, I've got RA gears that I'm looking into install..
subetrex12 2 years ago
Yup, it will be a direct bolt up to the transmission. All of the EJ series motors are essentially interchangeable with respect to the transmissions :) The EJ207 is a very nice motor, good luck with the install!
huckster107 2 years ago
wow...truly truly well rounded built wrx. great work right there. wheel fitment is sexy as hell.and ive never seen a rex get so sideways and still going WOT through gears!
KuostA 2 years ago
only cause 4wd you didnt spin out
subetrex12 2 years ago
well, that and a years of racing seat time :-P
huckster107 2 years ago
thanks :)
huckster107 2 years ago
sick no grip lol well done
davids251 2 years ago