Orangatang Wheel Info

[wowcantfindaname12]

Planning to learn with the dervish

[wowcantfindaname12]

What wheels should i get? I am getting a loaded dervish and am going to use it to it's fullest. But I can't slide. Yet

[Scottyman1811]

@wowcantfindaname12 75mm Purple in Heats. they are great to learn to slide on and when you have an understanding of sliding, they allow you to slide more freely

[MrGermanNinja]

wait does loaded make otangs?!?!?!?

[SBSlongboarding]

WHO ELSE WANTS SOME NEW BROTANGS?! 78a i suggest :DD

[raiderkid100]

can u make a video of the purple ones i would love that thank you

[comfort1able]

like if your watching this in 2011

[ButtaWaxProductions]

@comfort1able in 6 hours i will be watching this in 2012 but i will still give you a thumbs up :)

[maut97]

My loaded tan tien cost $320 Complete thats twice or more than a sector nine...

sector 9 is shit, just cheap and popular.

[homemadePAUL]

@maut97

sector 9 is for the ppl who tell their parents to get them a longboard or the rider doesnt want to do reasearch or order it from the internet

[SlideSity]

@maut97 Sector 9 has a lot of good boards and some shit boards as well. Depending on what you do, and what you wan't to do determines whether you should use a sector 9 or not.

[MrDigitalRob]

@maut97 Only difference is that loaded are overated so are O'Tang wheels you know why you never actually hear the wheel sound? Because if they didn't mute it with a song you would be deaf at the end of the video with wheel chatter. Go home fan boy.

[maut97]

My loaded tan tien cost $320 Complete thats twice or more than a sector nine...

sector 9 is shit just cheap and popular.

[Ladiesman1495]

@maut97 well loaded is shit, just expensive and popular

[sahand144]

Do you know how long it takes to break in 86a In Heats for sliding?

[VSUZUKIV]

do i need spacers for this wheels?

[SavingSilva1994]

Get that Sector 9 shit outta here. Sector 9 is for dick suckers and pussies if your either or both of those two Sector 9 is for you. Right now im running 4pres 86a best wheel i had in a while. I got a couple abec 11 wheels and landyachtz hawgs but my 4pres still my go to wheel. They dont slide or cone like crazy but the stims do slide like crazy i will admit that but they're free ride wheels sooooo...

[FudgeUnderCoverKing]

@SavingSilva1994 Can't tell if serious...or just a fucktard...

[SavingSilva1994]

@FudgeUnderCoverKing 90% serious 10% p-p-p-poker face

[moOvzzzzz]

otangs suck.

[brookstreetboards]

Check out Brook Street Boards

[XxTheJosephxX]

are the orange 80 otangs good for speed??? like are they fast or more for sliding

[roly4642]

were thoes gullwing?

[monsterthighs1]

How do you "break the wheels in correctly"???

[32LEM0NDR0P32]

@monsterthighs1 just slide with em, the more you slide with a certain set of wheels, the more broken in they will be for sliding,(the more broken in, the easier it is to slide) :D

[musiclover519]

@TheSunGoesWest thanks :)

[musiclover519]

im getting my dervish next saturday

im getting otang in heats

all i do is a few tricks cruising and carving

but i dont want a soft wheel

so orange is out of the question

which wheel would be better for me?

yellow or purple?

[ihatehaters9]

will the orange still be able to slide ?

[Tubofluxar]

@ihatehaters9

yeah orange slide the smoothest of them all

[Longboardmaestro]

Sadly otangs wear out fast.

:(

[UncleBillyProject]

I love this video...very inspiring!! I just gave a shout out to orangatang wheels in my last video. Check it out! I love these guys!

[MrCheabra]

wat are u talking about orange 4prez are so good for sliding

[TheJaykay95]

Are the 4presidents fine for just cruising? Do they affect the stability of the board at all, cause of the sharp edges?

[BullP00p]

Just got the orange in heats for my new switch with grizzlies and bones reds... Im gonna have so much fun when the board comes in xD

[hydramiga]

mmm they look look juicy!

[serendipitous6]

Stimulus for sliding, though the 4prez slides fine after broken in.

[FIREFOX274]

HEY LOADED!! what wheels are best for sliding?...i thought 4 president was good but in this vid you said it wasnt?

[logiebear107]

Will the In heats 75 mm fit on a top mount board?

[uMadBro333]

which ones should i get if i want to slide, but i still need some grip?

[foomboard]

im trying to decide what wheel i want.. 4pres or zigzags both 70mm an 80a. want grip and 70mm 80a

[avocadobride]

@NeonSnip3s If you know how to slide you can break them in.

[reysoccerpr]

what are the BEST orangatang sliding wheels?

[armyoftw012]

Do thes come with bearings....I need to Know!

[GreatFuckingBeast]

@armyoftw012 no

[MrJoey2miles]

I HAVE THE LANDYACHTZ 9 TWO 5 AND I WAS WONDERING WHICH WHEEL TO GET FOR EASY SLIDING AND NOT ALOT OF GRIP???

[skyking166]

@MrJoey2miles not the inheats :D base on your board, you want some really slidey wheels, since this is a loaded video, i have to mention the durians or the stimulus. I suggest metro motion, cult classic, and the hesher snowball for ultimate freeride/slide :D

[SuperJustinos]

@Zinsky81 o-tang stimulus

[zinsky81]

hey what would you recommend for wheels that are built to go fast and slide around some?

[PERRONmedia]

@zinsky81 S9 raceforms. cheaper then otangs, last longer. and have a much more consistent slide to grip. Once otangs a broken in the drift and slide like crazy, and cone pretty fast.

[zinsky81]

@PERRONmedia hmm i've never heard of those but i will look into them. thank you

[xthereisalightx]

@PERRONmedia Yup!



[minihooch99]

@PERRONmedia Im sorry but thats not true because i have owned the orangatang wheels for over 3 years now and nothing has gone wrong with them, plus S9 longboards arn't the best quality, Because they are for more for people who cant really longboard and can pick one up for like 80$, My empty board with nothing on it costs more then a sector 9 complete........LOL.......BUST­IN BOARDS.COM! BEST QUALITY IN LONGBOARDS!

[brutalback]

@minihooch99 lolwat clearly you're misinformed

[combat96]

What wheels do you recommend for uberspeed?

[PERRONmedia]

@combat96 seismic wheels, the black ops thane is fucking fast. Just don't slide them. it fucks with the thane.

[memster34]

can u put the durain 75mm 86a on a dervish with Randal-ll 180mm trucks

[memster34]

which are the best for sliding?

[denzuchiha]

It's cause they keep saying "flavors"

[linkinparktv22]

Idk why but that orange color makes me hungry.

[alsayed21]

for my loaded bhangra what wheels would you recommend me? plz answer

[abc123abc59]

@alsayed21 86a for prez

[blainey25]

I keep on getting the feeling that if I bite into one of the wheels, a fruity juice would come out.

[skyking166]

orangatang in heat 80a slides for sure, i have seen many people say it slides like crap, while some say it's fine. Well, let me tell you. I'm a new longboarder, i use to have orangatangs in heat 80a on my crusier, now i got a longboard (3days ago...), i threw the orangatang onto it. I have never ever ridden a longboard before until 3days ago. At first it didn't make big slides, it still slide, just a little bit. today i'm already able to powerslide 180. the wheel slides, if it doesn't..it's you.

[Nickalapolis]

@FreeFlo8 start doin speed checks and they'll start to break in then try some slides/reverts and they'll get easier to slide on it just takes time

[NVIgaming]

Make a pair with diffrent colors on each wheel! :D

[f35soad]

as you all know, they are created by alien monkeys... :D

[FreeFlo8]

how do u break in the in heats so they would slide

[TOM27770]

make some with different coloured lights in them

[Tubofluxar]

no make cyan blue ones !!! D:

[mrPACarrier]

Hey guys, in order, can you tell me the wheel that slide the more beetween the Venoms Cannibal 83a, the 4President 83a or the Fireball Beast 84a ? Thanks !

[crazjtk]

@mrPACarrier The Fireball Beasts slide like mad. medium-hard urethane, with angled edges. the other two are both more set up for grip. you *could* get them into a slide, but out of the box, the beasts will slide WAY more easily.

[BHNCBROS]

Gullwings Are Downright Horrible Though...................

[rafoman101]

loaded should make like a lime green 77a or 78a wheel

[Heatho22]

how do you break them in? just ride them and try sliding alot?

[rafoman101]

@Heatho22 hard carving also

[aod7745]

@Heatho22 ya pretty much and loaded has also come out with pre broken in wheels (durians stimulas and fat frees) so you can get those to slide but to break in the more grippy ones just ride and try to slide

[mrPACarrier]

Can you still get traction out of 83a 4Prez that are a bit worned (square lip became round) ?

[WILLMOO29]

i just got some 83a 4presedent wheels, u say how they will slide if they are broken in well? how do you brake in wheels well

[radicaldude881]

I have a question do they break easily?

[xcdis]

just bought a pair of orangatang in heat 75mm 80a

[xxDankLongboardsxx]

so how do you break them in to slide?

[TheCrazycudi]

@xxDankLongboardsxx light speed checks but u have to do backside and toeside or they wont be even

[kaijaicks]

i have 3 inch old school trucks on my gfh mini will i get wheel bite if i use orangatang 4presidents plz answer

[bombervids]

@kaijaicks More than likely yes.

[ViolinHero21]

my favorite color

[Longboardmaestro]

people say o'tangs wear/coned pretty fast.

True?

[FuckTheCHP]

@Longboardmaestro Yes, they do. During a race, Kevin Reimer and other sponsored riders use a new set of wheels every other heat or so. They lose their grip that fast. (Reimer even sells or gives away his used wheels) Not only that, but the wheels use LABEDA roller skate cores. Talk about cutting corners huh? O-Tang also had to recall a lot wheels because the cores were breaking. They use a higher grade plastic now, but still have the same shitty cores.

[Longboardmaestro]

@FuckTheCHP WOAH ! that'd cost me alot of money if they coned done pretty fast !

[FuckTheCHP]

Yes, they wear down very fast. During a race, Kevin Reimer and other sponsored riders use a new set of wheels every other heat or so. They lose their grip that fast. (Reimer even sells or gives away his used wheels) Not only that, but the wheels use LABEDA roller skate cores. Talk about cutting corners huh? O-Tang also had to recall a lot wheels because the cores were breaking. They use a higher grade plastic now, but still have the same shitty cores.

[sparce6]

86a stimulus or durians? i cant decide

[sobrinN]

I have orangatang in heat 80a :D

[WasGhettoBoy812]

is the orangatang 4 prez good for sliding?

[OpTicXVISIONX]

@WasGhettoBoy812 they fat frees, stimulus, and durians are the best for sliding cuz they have a rounded lip

[freehugz411]

orange 4pres are amazing, just they wear out really quick

[LPdannyLP]

what ever happened to the freeride wheels? o.o

[mrPACarrier]

How long do it take to brake some 80a In Heats ? I own some and im not sure if they are broken in .... Finally, is it normal that they have some (littles) chunks ?

[geektarher0]

@mrPACarrier it depends on how much do you ride, normally its about a week for someone who rides like 1-3 hours / day, if you're not sure just start making some nice big carves and then put your weight slightly on the nose, force the tail of your board to make it slide a bit, and just start going loose with it until you can completly slide them, it takes some days but your wheels will be sliding like butter!

[geektarher0]

@mrPACarrier and for the chatter just tighten your wheels so the wheel dont fly between the space your bearings left between each other or between them and your hanger. also you could try using some bearing spacers! (dont tighten your wheels to much cuz you're can screw your bearings up).

hope that helped :)

[syngatesbestbud101]

what does brocken in mean?

[Itakazookie]

@syngatesbestbud101 hmm... im not sure brocken in means much of anything but BROKEN in means, for wheels anyway, used enough to be able to slide and junk.

[syngatesbestbud101]

@Itakazookie ok thankyou :D

[iamLOBzilla]

But 4prez have a higher rate of acceleration

Bam

[jjay7790]

Hey, you guys went to New Zealand?!

[aboogie123456]

Lemon XD

[Datte93]

@aboogie123456 i'd say in heats cus they are bigger, therefore you can get a higer top speed than you can get with the 4prez

[unclejuju12]

Which is better for going fast cruising and carving the in heat or the 4 president

[JIGSAW5595]

Do they peel easy

[mrPACarrier]

Are the 80a In Heat good for sluding when brocken in ?

[thenewguy11111]

@mrPACarrier there not "good" but i mean they will slide haha. . . . if you want sliding go with the o-tang stimulus on there website. 86a there amazing.

[PilotG14]

I love to chew on ORANGATANGS

[wickitwonka17]

which is better for sliding??

[theoutubecelebrity]

I want to take a bite out of those wheels

[wyatte123]

lime green all the way

[skatedivona]

i have ridden every otang wheel in every duro except the fat free's. the oranga 4prez are by far the best. break them in right and they will slide in a drift silently.

[SpencerDolphin94]

@skatedivona yeah i have a set of the 80a 4pres and they slide so smoothly and quietly

[lperr39]

what does the in heat and 4president mean?

[vRaC3CaRv]

i have both... but i have the purple in heats..

[cheesepuffyoshiboy]

purple!!!!!!!!!!!!!!

[bcmbattle]

anybody know what wheel would look good on a malakai 40 by original????

[Tarzan07330]

@bcmbattle it's not looks, it's functionality. depends if you want a ton of grip or if you want to be able to break them free easier.

[Endlessdonut97]

@bcmbattle Get the 4president. You want a 70mm or less wheel since anything above 70mm will wehelbite

[Cheesiestmac]

MAKE GREEN ONES

[hoopladept]

@Cheesiestmac im thinkin pink.

[OpTicXVISIONX]

@Cheesiestmac no way that would suck they would be just like abec 11 wheels o'tangs need to be unique

[Uron350]

@Cheesiestmac threre are green ones...

[Uron350]

@Cheesiestmac threre are green ones... I think... At least in the video there are.

[Johnmunn01]

@Uron350 nu-uh, only orange, purp, and yellow

[xXSoiledTrousersXx]

@Johnmunn01 yeah man those green ones were just prototypes 

[NelsonLongboarding]

@Cheesiestmac in 77a!!! please! :)

[galahondrekonsquelch]

@tbcyo (continued)

to be able to grip and pump, go with the 83a stimulus. You'll get a little noise from both when you're sliding, but that should fade once you break them in more.

[galahondrekonsquelch]

@tbcyo-

The 83a 4pres are a very good all around wheel that focus mainly on grip, but once broken in will slide very well, and are very, VERY durable. I don't know about the durability of the stimulus yet, but I can tell you that they slide I a LOT easier and more consistently than the 4pres, but they won't grip quite as well. If you want to be able to carve really hard and pump, but still want to do a lot of sliding, go with the 83a 4pres. If you want to focus mainly on sliding, but still want

[monkieboi88]

i just got a comet pagan and am wondering which wheels i should get. 4President, or In Healts. if i run the in heats on 42 degree randals, would i get wheel bite? and is the 4President good for dh? please get back to me

[opmfsnipe]

is the in heat realy big or its just ok......

plz answer

[tbcyo]

@opmfsnipe they are kinda big

[ApokalispeLongboard]

humm its is for make powerslide cause my whell is gel but i try to make powerslide and this grad the ground plz send me a email wen you resolve my probleme

[Zipley1234]

Been breaking my 83a In heats in for a couple of weeks now. They are the beez neez =D They slide smoothly, but gives me a comfortable amount of grip when I want it. I have no problems with breaking out slides at slow speeds, but I can corner tightly when going fast also. Thumbs up!

[novakmast21]

what would be the best orangatang wheels to use for a loaded dervish if u want to slide but have grip at the same time?

[yj38383838]

@novakmast21 I would get the vanguard it is basically the same thing.... if you are getting orangatang wheels go to their website and you can choose one that you would like and is like how you would ride..... and the vanguard is cheaper than the dervish and i think the vanguard has a cooler graphic.....

[MrTomthedestroyer]

please start scenting your wheels. that would make my longboarding so much more enjoyable. every slide would smell like grapes lemons or oranges!

[brandoncormac]

@MrTomthedestroyer WHY DOES THAT SOUND LIKE SUCK A FUCKING AMAZING IDEA haha omg dude you are a genious loaded PLEASE THAT WOULD BE AWESOME!!!!!!!

[wickitwonka17]

@MrTomthedestroyer how?

[MrTomthedestroyer]

@wickitwonka17 put scented stuff in the urethane or something, but it would make them so much more fun

[solitajre222]

@MrTomthedestroyer Well that would be bad, you'd only sit around and smell the wheels and not ride xD

[TeaBagSpank]

@MrTomthedestroyer or orangutangs :)

[ThatOneGuy1027]

@MrTomthedestroyer I would think that people that are high might be tempted to lick them

[OJJVZ]

@ThatOneGuy1027 hahahah it looks so damn tasty! xD

[wonderbreadkw]

cannot wait for my orange 4 pres' to come in

[colinprprpr]

hey loaded i got a question for u. I know ul be upset to hear this but i have a landyachtz spud... BUT... i use your wheels. Currently i have yellow durians, but i want something a lil more soft and downhill oriented. Now my question is, which wheel is for me. I still want to be able to slide some, butmainly for speed reasons, ya know. I weigh 140 if that means anything, and im hittin speeds around 30 ish... thinkin of goin faster. THANKS!

[divepromichael1]

Where do I get pricing info? How do I order, if I decide I want a set?

[11xXDANIXx11]

@divepromichael1  go to stoked skateboards they have usa prices

[pezz035]

@THEWAR2012 thanks alot, I guess I haven't really broken my strikers in too much

[pezz035]

Right now I have 84a 66mm abec 11 strikers on my apex 37 and I want to do slides ( mostly stand up slides)

Should I pay an extra $50 to get some yellow durians or just stick with my strikers?

[THEWAR2012]

@pezz035 your wheels are perfect for sliding, i have 77mm strikers on my switch and can do 540's going under 20 mph.

[SpencerDolphin94]

@pezz035 dude dont get durians on an apex 37 go for stimulus they will slide qucker because they are smaller

[austinnichol]

I want to get some orangatang wheels but I don't know which ones I should get. I will be cruising and sliding and doing lots of carving, and I want a really smooth ride. should I get the in heat 80a or 83a?

[humpde479]

@austinnichol 83a because it will seem a lot softer because of the ripples

[sk8skiboard3]

hey im planning on doing some stand up slides, hard carving, and lots of tricks, on an apex 34. What wheels do you think are the best for me

[BurtonStash2010]

@sk8skiboard3 Purple durians, or Purple in heats

[colinprprpr]

@BurtonStash2010 maybe yellow durians. Thats what i did, since they are bigger, more contact patch but they are harder. Purple 4 pres would be softer but smaller contact patch.  Thats what i was choosing from, and i chose yellow cuz i like the bright color. I wish they made orange or green ones in that style

[Felixhackz]

Best wheels in the world! Love = Orange In-Heats

[soldierpookie]

planning on doing donwhill but dunno wich to take between the purple (83a) or orange (80) otangs in heat wheels... might be taking the orange because there grippier but the purple slide better i heard... any idea of wich one i should take ? wnna be able to do some good sliding but still have good grip

[WeLovePopTarts]

Hey guys wanna see some chill longboarding? watch my video and sub me please

[SomeoneNamedTom]

the 75s r beastly

[Akidvid]

so with the otangs in heat (orange) can you still do 180 spins etc. cause i have original trucks and i ride an apex 37 so i like sharp turns and i want some wheels that can slide good with nice grip and still can turn sharp

[trudal987]

depends what you want

[Deltcon]

lqtm 0:02