i have done an ipod repair before but this time when i put the new screen in and it comes on white and now the lock button does not work i need help please
I did the every thing step by step and even powered on the iPod to see if it worked before sealing it after sealing it, it looks brand new only problem is iPod doesn't power on. Any idea what might of went wrong?
I did this whole fix and then found all I got was a white screen. I tried the rebooting thing didn't work. I opened it up again and took a good look. Then I saw that there is a piece above the LCD connection that wasn't fitting right. I folded the plastic that holds the 2 pieces together so they could connect and tried again. It no works fine. Hope I explained this well enough !!
Ops! I bought just the outer clear replacement glass, If I buy the LCD pad and tinted glass, can I simply add it to the glass even though it isn't adhered to the clear outer glass? Or do I have to purchase a whole new kit? Also I notice you didn't reattach the copper foil tape to the camera, doe's that matter?Thanks for your response.
Fudgers, well....I was taking out the logic board and I didn't know there was like a black box like thing stuck to it with the adhesive in the bottom left hand corner. So when I pulled of the logic board the little black thing came off too, it had a red and blue wire. The blue one broke. What did I do!? Reply assp, please. ):
@DCUnitedGuy I did this whole fix and then found all I got was a white screen. I tried the rebooting thing didn't work. I opened it up again and took a good look. Then I saw that there is a piece above the LCD connection that wasn't fitting right. I folded the plastic that holds the 2 pieces together so they could connect and tried again. It no works fine. Hope I explained this well enough !!
hey guys, thanks for that video! i tried and i think i did it all right but now my screen is flickering all white and pink. it still works though, but it gives you a headache. where is the problem? Do I have to redo the whole procedure?
@SomthingRighteousTWC I did this whole fix and then found all I got was a white screen. I tried the rebooting thing didn't work. I opened it up again and took a good look. Then I saw that there is a piece above the LCD connection that wasn't fitting right. I folded the plastic that holds the 2 pieces together so they could connect and tried again. It no works fine. Hope I explained this well enough !!
The adhesive on the volume buttons cable was a bit tougher than i thought and it ended up tearing the volume buttons cable. What is the best advice on this situation, is there a way to replace it? Thanks!
@kazumatheshellbulet5 Ouch! That is the biggest and worst mistake that can be made while performing this repair. But repairing that cable requires micro-soldering, so if any local electronics repair shop should be able to help you with that. Hope this helps!
for those who have tried this, does your screen turn on? I wanna replace my screen, but I don't wanna go through all the steps and get a disappointment. thanks!
@larissanelle95 It worked for me after some tweaking ! I did this whole fix and then found all I got was a white screen. I tried the rebooting thing didn't work. I opened it up again and took a good look. Then I saw that there is a piece above the LCD connection that wasn't fitting right. I folded the plastic that holds the 2 pieces together so they could connect and tried again. It no works fine. Hope I explained this well enough !!
I bought a replacement screen and it didn't have the Digitizer attached.....can you show how to take off the Digitizer because the old one is fine i think
Hi! if I warm up the ipod with the hair dryer when I close the iPod with the new lcd replaced to make it adhere to the glue on the underside may be that the heat melted some circuit device?? the screen before was completely white...and now doesn't power on!! :(
@MrLollo90 Hi Lollo!- Heating up the iPod with a hair dryer would not affect the iPods ability to power on. Without seeing the iPod myself, I'm assuming the LCD might have gotten bumped and is not fully connected to the logic board. If you come across a white screen again, try doing a hard reset by holding the power button and the home button simultaneously for 30 seconds and its should reboot correctly.
Thank you so much! :) Now i have another question for another 4g ipod touch ... I broke a small portion of the connection between the flexible cable of the volume and the logic board, where there are the four point of welding. However, is not completely severed... only one path of the circuit...may this affect the work of the ipod when I'm going to change the lcd screen? may be that the ipod will not power on? or simply the volume don't works through the buttons?
@xxlaze44 Hi Laze! - We're happy to hear about your success! If you'd like some help to diagnose the front facing camera issue simply give us a call on our hotline with your order number! Congrats!
@devonpowell2011 Luckily we have our certified iTechs across the US who can help you with your repair! Contact a local iTech in your area and simply schedule a time for them to come over!
@IzzyJin2525 that really sucks man. i guess you have to deal with stuff like that when you do it yourself. I'm replacing mine this weekend when the parts come in. :D
will this glue work? h t t p : / / w w w . w a l m a rt . c o m / i p / I n st an t -K r a z y - G l u e - 2 p k / 1 7 0 1 1 3 53 work? srry about the space just that youtube wont let me paste it so just remove all the spaces
I followed every step in the video but my iPod won't turn on. I took everything out again to make sure that I didn't break any of the cables and to see if the digitizer was actually connected but nothing was broken and the digitizer was connected. Any ideas on what might be wrong? Thanks
Great Video, got my iPodTouch up an running... I do have a question before I glue mine back together! At 3:22 there is a piece of metal (stuck to the broken glass). You put it off to the side, but I never see you put it back!? The piece of metal is at the top of the Touch. Do we need to put this back in, or will it function w/o it? Thanks!
@ljaureguiv It seemed like there wasn't enough glue the first time because the screen looked like it could easily be pulled back out. I think I just pushed on it too hard when trying to press on it to get the glue to harden. Atleast I'd rather look at a small broken LCD bubble on the side of my screen then a cracked screen =]
The LCD connecter is a pain in the ass since it won't stay connected as soon as you lift up the touch screen. From trying to put glue on, I slightly messed up the screen and now it looks like a small oval bubble on the side. Other than that, this has been very helpful and my ipod touch is 98% fixed =]
i just did this and my ipod won't turn on at all. the power button doesnt do anything, i tryed to plug it in to a plug socket or to my mac, but it wont turn on. no reaction. nothing. any ideas??
inside it's looking pretty good, i didn't hurt anything or demaged the little connecion fom the logic board to the power/loud/quit buttons. seriously, i have no clue what's wrong with it.
Hello i have a questio i have the ipod touch 4g the black screen type and my screen is broken can i buy a white screen replacement and put it in my ipod touch 4g?
i just did this and my ipod won't turn on at all. the power button doesnt do anything, i tryed to plug it in to a plug socket or to my mac, but it wont turn on. no reaction. nothing. any ideas??
inside it's looking pretty good, i didn't hurt anything or demaged the little connecion fom the logic board to the power/loud/quit buttons. seriously, i have no clue what's wrong with it.
Great Video... I do have a question before I glue mine back together! At 3:22 there is a piece of metal (stuck to the broken glass). You put it off to the side, but I never see you put it back!? The piece of metal is at the top of the Touch and looks like it has 2 big hooks & 1 smaller hook. Do we need to put this back in, or will it function w/o it? Thanks!
my ipod touch screen is cracked not very badly and nothing else is wrong with it but it does get in the way so i was wondering if i bring it in will it work just as well as it did when i brought it in and everything will work nicely.
@DimaBrovka Hi Dima -- We actually send out this awesome 3M adhesive that works great with every DIY kit now. Feel free to go on our website and check it out! As always, you can also call our hotline for any help during your repair.
I have a question to the IcrackedTeam. My Ipod touch 4g has a broken screen and also the charging port doesn't work on any computer at all. Could you replace the port also?
I have a question i got the white ipod 4g but the screen got cracked. Your website only sells black digitizers only but will my ipod still work if i put the black digitizer? Please help
@1001christianfelix Hi Christian - The black digitizer will work just fine and we also have white iPod 4th Gen screens on the website now! Best of luck with your repair and don't hesitate to call us for any assistance
@ifixwidgets Hi iFixwidgets - I believe you're referring to the foil that covers the mid plate of the rear facing camera. Although you would want to try and restore the iPod back to its original state, this foil will not affect the performance of the iPod and will still work correctly.
thank you very much, best video of this type I´ve seen so far. but something I´m still uncertain about: where can I get new screens from? and do they have something like any special product names I need to know to find them? do mobile phone or electronic equipment shops sell them? does apple do it by itself? or do it´s partners do so? if not: are they even legal? and how much do they cost (from ... to ...) ?
I HAVE THE SAME IPOD AND ITS 8 GB AND ITS A BLACK ONE , MY QUESTION IS CAN I SWITCH THE SCREEN DIGITZER FROM A BLACK TO A WHITE DIGITIZER ? WILL MY IPOD STILL WORK ?
@caliwest2011 HI CaliWest! - We can definitely change your iPod to white as the parts are interchangeable. Just make sure you're getting the highest quality of parts
@ICRACKEDiPhoneRepair i changed it to white , and everything is good except that my touch screen isnt workking, And i tried restoring it and turn it off but it still doesent work , What should i do ?
@caliwest2011 Hi CaliWest - It sound like your digitizer isn't fully connected. Did you hear it snap into the logicboard? I would try a hard reset if you haven't already, see if that helps. If not I would check to see if there' any damage on the digitizer cable or if its not properly connected!
@caliwest2011 Okay everything is working except my camera , like it just stays on the shutter part , you think theres something wrong with the camera ?
Glad we could help you with the parts and video! Feel free to call our hotline if you need any help when doing the repair. As far as your home button question, the home button is held onto the screen assembly with an adhesive "skirt" that you take off your old screen and place it onto the new one. Its very easy and we show you how to do this in the repair video above. This "skirt" allows the homebutton to move freely.
hi i just odered my kit and i am getting a new home button two, im just wondering how would i put the home button in place with adhesive and still make it move freely? i mean like clicking in. Thanks
Great Tutorial!! Just did this repair and worked a treat! Had one problem with it and that was it wouldn't turn on I guess because I didn't power down before I started?? But holding down the home and on/off button for 10-15 seconds re started it YAY :-)
@irelmo69 Great job irelmo! That's exactly right - If for some reason your iPhone, iPod, or iPad is not turning on, attempt to do a "Hard Reset" holding the power button and home button at the same time for 30 seconds and its should reboot the phone. This will happen if you do not power off the device before beginning the repair. Not to worry though as it will not affect the performance of your device!
Nice guide man! Looked all over for one haha
BboyBopper 9 hours ago
how much do you have to pay ppl to do that?
TheTakisMusic 11 hours ago in playlist iPod Touch 4G LCD Screen Replacement
I did this yesterday. I cannot get the top part closed. It looks like the wifi connector is to long. Also now I have no sound.
239ChrisMr 1 day ago
can you help me because i dont know how to put the wifi connector and do i have to take apart literally all apart?
TheMinecraftXplorers 2 days ago
i have done an ipod repair before but this time when i put the new screen in and it comes on white and now the lock button does not work i need help please
yhyhytyfr 2 days ago
Thumbs up if you're watching this on a cracked iPod
isuckatstarcraft96 3 days ago 2
I did everthing and now it wont power on
badbree11 3 days ago
I did the every thing step by step and even powered on the iPod to see if it worked before sealing it after sealing it, it looks brand new only problem is iPod doesn't power on. Any idea what might of went wrong?
zadey1 4 days ago
The assembly went well. But when I went to scroll over to unlock my iPod wont capture my touch. Any ideas??
rosefuneral6 4 days ago
This has been flagged as spam show
Get iPhone4 is not a secret anymore,just Use coupon code! SrmQ accuc.info
brotmancmdjd22Cc 4 days ago
Can you remove the digitizer from the LCD screen? If so, how?
samblacksmith3 5 days ago
can i use gorilla glue?
Sweetooth66 5 days ago
My iPod is white how do I fixed ? What did I did wrong ?
21estrada 5 days ago
I got all the way to step 5, but two of the screws wont unscrew. the one on the left side and the one on the bottom left. Any idea on what I can do?
SMercedes07 5 days ago
i have black ipod touch 4g, and the screen is cracked, would it still work if i get the white color screen replacement?
eseLatin 6 days ago
@eseLatin yes it will, I am currently doing the same thing.
SMercedes07 5 days ago
ooh my gosh why isnt any one shows how to remove the broken from the lcd
eliudmk 6 days ago
I did this whole fix and then found all I got was a white screen. I tried the rebooting thing didn't work. I opened it up again and took a good look. Then I saw that there is a piece above the LCD connection that wasn't fitting right. I folded the plastic that holds the 2 pieces together so they could connect and tried again. It no works fine. Hope I explained this well enough !!
rdauld 6 days ago
Can I apply a white iPod touch front instead of a black on on my black iPod touch?
omygod143 6 days ago
This has been flagged as spam show
@omygod143 yes, there is no difference. I am currently doing the same thing
SMercedes07 5 days ago
Where can I get a white bezel or frame for the iPod Touch 4th gen?
waheedx97 6 days ago
@waheedx97 I got mine from Amazon, with the tool kit any everything.
SMercedes07 5 days ago
@SMercedes07 is it white? and white outer frame?
waheedx97 5 days ago
@waheedx97 yes, looks exactly the same as my black one, just in white, with white home button.
SMercedes07 5 days ago
@SMercedes07 could you please send me a pic of how nice it turns out?
waheedx97 5 days ago
@waheedx97 I would but right now I am having problem unscrewing two of the screws. For some weird reason it does not want to unscrew :/
SMercedes07 5 days ago
it would be a good idea to test it before gluing
SuperTicktac 6 days ago
what happens if your new screen did not bring the LCD? Is it too important?
0826Lina 6 days ago
@0826Lina You can't fix it if you only have the screen you need to order both parts together
rdauld 5 days ago
@0826Lina BWH YEAH!
waheedx97 5 days ago
After following all these steps my ipod does nothing any help on how to trouble shoot?
justcoverme 1 week ago
@justcoverme make sure the plugs are connected properly, then press home and power button simultaneously and wait for apple symbol, it should do it!
waheedx97 5 days ago
there were two wires at the bottom of the ipod and and they were red and blue. the blue one broke is that bad? can i repair it? Help!
lilchamp4life 1 week ago
you seem to have messed up the very bottom
apastalic 1 week ago
U show how to fix it better than the other videos I've seen. Thanks :D
FanNationWide 1 week ago
Ops! I bought just the outer clear replacement glass, If I buy the LCD pad and tinted glass, can I simply add it to the glass even though it isn't adhered to the clear outer glass? Or do I have to purchase a whole new kit? Also I notice you didn't reattach the copper foil tape to the camera, doe's that matter?Thanks for your response.
sherrimcksunflower 1 week ago
is this crazy glue just like super glue? can i use super glue? please help me <---------------||||
JBUNIT24 1 week ago
@JBUNIT24 Krazy Glue is super glue! It is all the same thing!
ICRACKEDiPhoneRepair 1 week ago 3
Fudgers, well....I was taking out the logic board and I didn't know there was like a black box like thing stuck to it with the adhesive in the bottom left hand corner. So when I pulled of the logic board the little black thing came off too, it had a red and blue wire. The blue one broke. What did I do!? Reply assp, please. ):
EmanresuxX 1 week ago
Is it possible to just order the LCD and digitizer because I don't want the full kit everytime. And I wish you would've powered it on for us..
bboes13 1 week ago
Is it may possible to replace my black iPod Touch 4G screen with a white screen ??
FunAboutMyself 1 week ago
@FunAboutMyself It is completely up to you! The only difference between the screens is the color!
ICRACKEDiPhoneRepair 1 week ago
@ICRACKEDiPhoneRepair But how do I get a white Home Button? ;)
FunAboutMyself 1 week ago
Comment removed
FunAboutMyself 1 week ago
I did this repair in 15 mins using this video and im 14 years old...
waheedx97 1 week ago
@waheedx97 Pretty impressive!! Be sure to spread the good word!
ICRACKEDiPhoneRepair 1 week ago
I did all of this but the screen is completely white. I tried resetting it but it wouldn't work, pleasse help!!
DCUnitedGuy 1 week ago
This has been flagged as spam show
@DCUnitedGuy I did this whole fix and then found all I got was a white screen. I tried the rebooting thing didn't work. I opened it up again and took a good look. Then I saw that there is a piece above the LCD connection that wasn't fitting right. I folded the plastic that holds the 2 pieces together so they could connect and tried again. It no works fine. Hope I explained this well enough !!
rdauld 6 days ago
can you use a iphone 4 home button on a ipod touch 4g
just0bust0 2 weeks ago
hey guys, thanks for that video! i tried and i think i did it all right but now my screen is flickering all white and pink. it still works though, but it gives you a headache. where is the problem? Do I have to redo the whole procedure?
LittleFreakisoy 2 weeks ago
I did everything but my screen just turns white then shuts off, whats wrong?
SomthingRighteousTWC 2 weeks ago
This has been flagged as spam show
@SomthingRighteousTWC I did this whole fix and then found all I got was a white screen. I tried the rebooting thing didn't work. I opened it up again and took a good look. Then I saw that there is a piece above the LCD connection that wasn't fitting right. I folded the plastic that holds the 2 pieces together so they could connect and tried again. It no works fine. Hope I explained this well enough !!
rdauld 6 days ago
did he forgot to put some screws?
chinomv 2 weeks ago
is it possible just to replace the digitizer. or is the digitizer and screen stuck together?
BjCaruso 2 weeks ago
The adhesive on the volume buttons cable was a bit tougher than i thought and it ended up tearing the volume buttons cable. What is the best advice on this situation, is there a way to replace it? Thanks!
kazumatheshellbulet5 2 weeks ago
@kazumatheshellbulet5 Ouch! That is the biggest and worst mistake that can be made while performing this repair. But repairing that cable requires micro-soldering, so if any local electronics repair shop should be able to help you with that. Hope this helps!
ICRACKEDiPhoneRepair 1 week ago
The best tutorial I've seen so far, thank you so much!
cerealandtoast 2 weeks ago
It's fake look at the close end of the video by the home button
LightsaberMaker 2 weeks ago
@LightsaberMaker Not fake I just did it and it is working !
rdauld 6 days ago
for those who have tried this, does your screen turn on? I wanna replace my screen, but I don't wanna go through all the steps and get a disappointment. thanks!
larissanelle95 2 weeks ago
This has been flagged as spam show
@larissanelle95 It worked for me after some tweaking ! I did this whole fix and then found all I got was a white screen. I tried the rebooting thing didn't work. I opened it up again and took a good look. Then I saw that there is a piece above the LCD connection that wasn't fitting right. I folded the plastic that holds the 2 pieces together so they could connect and tried again. It no works fine. Hope I explained this well enough !!
rdauld 6 days ago
do you have to replace the copper tape ?
XboxGamerKidd 2 weeks ago
Also can the wifi cable that is stuck on the screen that you should take off so the wifi still works, be replaced or fixed???
Please comment asap
MrPocoLoco1 3 weeks ago
can you replace my screen even though i live in britain?
KieMcKenna789 3 weeks ago
@KieMcKenna789 i could
waheedx97 5 days ago
Where can i order the screen with the digitizer? because my digitizer is also cracked
MrPocoLoco1 3 weeks ago
I bought a replacement screen and it didn't have the Digitizer attached.....can you show how to take off the Digitizer because the old one is fine i think
Autumnrainsite 3 weeks ago
Also is superglue okay as adhesive..?
angrypear54 3 weeks ago
What are the screw sizes? Pleasse reply asap if u can!!!!! Thankss
angrypear54 3 weeks ago
its not letting me slide to unlock, whats wrong?
yungju2010 3 weeks ago
What kind of adhesive do you recommend?
jeremytrubilla 3 weeks ago
Great video by the way!
angrypear54 3 weeks ago
Do you by any chance know all the sizes of the screws because I'm not sure where to reinsert which screws....thanks!
angrypear54 3 weeks ago
@angrypear54 He mentions the sizes in the video ! I stuck all mine to tape so I could replace them in the same positions !
rdauld 6 days ago
Comment removed
legoboy12370 3 weeks ago
im going to do ths except ill replace the screen with a aftermarket blue screen off of ebay, it will be 1 of a kind (at least that i know of )
TDHReviews 3 weeks ago
My home button feels out of place but I don't want to remove the screen to fix it :3
WAFFLESxDv 3 weeks ago
My ipod lost its touch sensablity does buying a new screen fix the sensabilty
TheAlex10760 3 weeks ago
I have a questioon, If you try replacing an ipod touch 4g digitizer with an iphone 4 digitizer will it still work?
samieskittle123 3 weeks ago
@samieskittle123 I sure wish you could! The sizing and frames are completely different but you can order the part on our website!
ICRACKEDiPhoneRepair 3 weeks ago
hey is the copper important? i accidently ripped my camera one.. does it matter? please reply asap would be great!
Raphcoll 3 weeks ago
@Raphcoll Hi Raphcoll - You don't have to sweat it the iPod will work just fine without it :)
ICRACKEDiPhoneRepair 3 weeks ago
@ICRACKEDiPhoneRepair Could you make a video about iPod Touch 4 housing replacement?
waheedx97 1 week ago
@Raphcoll not really...
waheedx97 5 days ago
Hi! if I warm up the ipod with the hair dryer when I close the iPod with the new lcd replaced to make it adhere to the glue on the underside may be that the heat melted some circuit device?? the screen before was completely white...and now doesn't power on!! :(
Sorry 4 my english! ;)
MrLollo90 3 weeks ago
@MrLollo90 Hi Lollo!- Heating up the iPod with a hair dryer would not affect the iPods ability to power on. Without seeing the iPod myself, I'm assuming the LCD might have gotten bumped and is not fully connected to the logic board. If you come across a white screen again, try doing a hard reset by holding the power button and the home button simultaneously for 30 seconds and its should reboot correctly.
ICRACKEDiPhoneRepair 3 weeks ago
Comment removed
MrLollo90 3 weeks ago
Comment removed
MrLollo90 3 weeks ago
This has been flagged as spam show
Thank you so much! :) Now i have another question for another 4g ipod touch ... I broke a small portion of the connection between the flexible cable of the volume and the logic board, where there are the four point of welding. However, is not completely severed... only one path of the circuit...may this affect the work of the ipod when I'm going to change the lcd screen? may be that the ipod will not power on? or simply the volume don't works through the buttons?
MrLollo90 3 weeks ago
I did it in like 1 hour, messed up my front facing camera but that's no big.Thanks a lot.
xxlaze44 3 weeks ago
@xxlaze44 Hi Laze! - We're happy to hear about your success! If you'd like some help to diagnose the front facing camera issue simply give us a call on our hotline with your order number! Congrats!
ICRACKEDiPhoneRepair 3 weeks ago
what if i replace it and it still doesnt work ?
devonpowell2011 3 weeks ago
@devonpowell2011 Luckily we have our certified iTechs across the US who can help you with your repair! Contact a local iTech in your area and simply schedule a time for them to come over!
ICRACKEDiPhoneRepair 3 weeks ago
sooo why didnt you show it working and going through the functions ?????
miket144 1 month ago
What kind of glue have you used? Can you tell me an italian glue please?
bullet820 1 month ago
@bullet820 Krazy Glue is the same as any super glue
roboticunclephil 1 month ago
Where can you buy a new screen for that is cheep?
jonhreddog 1 month ago
@jonhreddog Look on Amazon, but make sure it comes with the digitizer
roboticunclephil 1 month ago
best video i watched , thanks dude i was so stressed out doing this but you made it easy lol
TheRiseBmx 1 month ago
anyone have any suggestions on stuck screws? :P
cod4basterd 1 month ago in playlist iPod Touch 4G LCD Screen Replacement
@IzzyJin2525 u can replace it
jacobduffney11 1 month ago
what do u do with the wifi wire do u put super glue on it and done?
SilenceTearz 1 month ago
It ruined my volume control! I was watching the video and when I went to lift the logic board, the volume botton control was ripped!
No volume buttons for me >:(
IzzyJin2525 1 month ago
@IzzyJin2525 that really sucks man. i guess you have to deal with stuff like that when you do it yourself. I'm replacing mine this weekend when the parts come in. :D
TrollingMakesMeHard 1 month ago
what happen at the end wen he finished ....the ipod at the bottem was not done properly
686sami 1 month ago
will this glue work? h t t p : / / w w w . w a l m a rt . c o m / i p / I n st an t -K r a z y - G l u e - 2 p k / 1 7 0 1 1 3 53 work? srry about the space just that youtube wont let me paste it so just remove all the spaces
SilenceTearz 1 month ago
my wifi doesnt work anymore! Y?
duendeproductionz 1 month ago
@nene6927 The name of it is Crazy Glue Adhesive, go to CVS and ask if they have it and they probably will have the glue.
moptops4 1 month ago
I did everything he said and it worked perfectly, best tutorial out here, very well explained used this!!!
THANKS A LOT!
waheedx97 1 month ago
Do you have to power it off?
Saul1250 1 month ago
best fucking tutorial!
giorbakis2 1 month ago
Why didn't you turn it on to make sure it worked?
yotuber666 1 month ago
I say that glue you use the name please
nene6927 1 month ago
I followed every step in the video but my iPod won't turn on. I took everything out again to make sure that I didn't break any of the cables and to see if the digitizer was actually connected but nothing was broken and the digitizer was connected. Any ideas on what might be wrong? Thanks
ryanj136 1 month ago
thas why i got warrenty
cipaleangelo 1 month ago
So i did everything, and made all of the connections.. but I got no power. Any ideas? The screan shows absalutely nothing. Thanks!
Laplume27 1 month ago
the foil part is a PAIN IN A
THE ASS
ljaureguiv 1 month ago
This has been flagged as spam show
Great Video, got my iPodTouch up an running... I do have a question before I glue mine back together! At 3:22 there is a piece of metal (stuck to the broken glass). You put it off to the side, but I never see you put it back!? The piece of metal is at the top of the Touch. Do we need to put this back in, or will it function w/o it? Thanks!
gutturtle 1 month ago
@ljaureguiv It seemed like there wasn't enough glue the first time because the screen looked like it could easily be pulled back out. I think I just pushed on it too hard when trying to press on it to get the glue to harden. Atleast I'd rather look at a small broken LCD bubble on the side of my screen then a cracked screen =]
SomethingMuchHarder5 1 month ago
The LCD connecter is a pain in the ass since it won't stay connected as soon as you lift up the touch screen. From trying to put glue on, I slightly messed up the screen and now it looks like a small oval bubble on the side. Other than that, this has been very helpful and my ipod touch is 98% fixed =]
Thank you!
SomethingMuchHarder5 1 month ago
@SomethingMuchHarder5 u probably put too much glue?
ljaureguiv 1 month ago
2nd gens are so much easyer to fix! Damn technology...
TheHandheldDude 1 month ago
This has been flagged as spam show
i just did this and my ipod won't turn on at all. the power button doesnt do anything, i tryed to plug it in to a plug socket or to my mac, but it wont turn on. no reaction. nothing. any ideas??
inside it's looking pretty good, i didn't hurt anything or demaged the little connecion fom the logic board to the power/loud/quit buttons. seriously, i have no clue what's wrong with it.
chilla3112 1 month ago
Hello i have a questio i have the ipod touch 4g the black screen type and my screen is broken can i buy a white screen replacement and put it in my ipod touch 4g?
TheCtm405 1 month ago
what adhesive are you using in this video, please name the exact name and where you can buy it from...
waheedx97 1 month ago
@waheedx97 what the video retard
walnut0231 1 month ago
@walnut0231 thats not crazy glue dip shit...
waheedx97 1 month ago
you can respond to yourself sick!
waheedx97 5 days ago
i just did this and my ipod won't turn on at all. the power button doesnt do anything, i tryed to plug it in to a plug socket or to my mac, but it wont turn on. no reaction. nothing. any ideas??
inside it's looking pretty good, i didn't hurt anything or demaged the little connecion fom the logic board to the power/loud/quit buttons. seriously, i have no clue what's wrong with it.
chilla3112 1 month ago
@chilla3112 i did the same thing. it cant be repaired =/
andrew30329 1 month ago
hi i got a ipod 4g 32gb for 36$ it wont turn on becues it has a cracked sccreen
what do i need to replace
me46393 1 month ago
@me46393 the digitizer and lcd assembly
waheedx97 5 days ago
Where can I buy a screen or how much would it cost to send the iPod?
TheShiningStarWishes 1 month ago
Comment removed
TheShiningStarWishes 1 month ago
worked 100% but i got super glue all over my screen:/ but i used brake cleaner and it took it all over without damage!!:D
jdizzy60 1 month ago
Good video.
I have a question, what glue did you use?
can i use normal glue?
EDemonOfficial 1 month ago
Awesome video guys
But I have a question
Can I send u guys my iPod then u guys fix then send it back?
tjayoub 1 month ago
Great Video... I do have a question before I glue mine back together! At 3:22 there is a piece of metal (stuck to the broken glass). You put it off to the side, but I never see you put it back!? The piece of metal is at the top of the Touch and looks like it has 2 big hooks & 1 smaller hook. Do we need to put this back in, or will it function w/o it? Thanks!
gutturtle 1 month ago
I accidentlybroke the black ribbon connected to the new digitizer. Do I need to order a new screen?
CookiesMcNookies 1 month ago
what do i do if i stripped a screw
busyramp 1 month ago
is crazy glue safe to use?
reddishmango 1 month ago
Comment removed
ljaureguiv 1 month ago
my ipod touch screen is cracked not very badly and nothing else is wrong with it but it does get in the way so i was wondering if i bring it in will it work just as well as it did when i brought it in and everything will work nicely.
wolflover292 1 month ago
Is it sposet to be like that at the bottom of the iPod at 0:50
xxxxxxxxxxxxxx9hvjkd 1 month ago
Where can i get the liquid adhesive you are using?
DimaBrovka 1 month ago
@DimaBrovka Hi Dima -- We actually send out this awesome 3M adhesive that works great with every DIY kit now. Feel free to go on our website and check it out! As always, you can also call our hotline for any help during your repair.
ICRACKEDiPhoneRepair 1 month ago
I have a question to the IcrackedTeam. My Ipod touch 4g has a broken screen and also the charging port doesn't work on any computer at all. Could you replace the port also?
TheFinalFantasyFan69 1 month ago
@TheFinalFantasyFan69 Hi FFF -- We do not repair the charging ports at this time.
ICRACKEDiPhoneRepair 1 month ago
I have a question i got the white ipod 4g but the screen got cracked. Your website only sells black digitizers only but will my ipod still work if i put the black digitizer? Please help
1001christianfelix 1 month ago
@1001christianfelix Hi Christian - The black digitizer will work just fine and we also have white iPod 4th Gen screens on the website now! Best of luck with your repair and don't hesitate to call us for any assistance
ICRACKEDiPhoneRepair 1 month ago
@ICRACKEDiPhoneRepair thanks!!
1001christianfelix 1 month ago
what should i do if the foil on the steel mid plate breaksoff?
ifixwidgets 1 month ago
@ifixwidgets Hi iFixwidgets - I believe you're referring to the foil that covers the mid plate of the rear facing camera. Although you would want to try and restore the iPod back to its original state, this foil will not affect the performance of the iPod and will still work correctly.
ICRACKEDiPhoneRepair 1 month ago
thank you very much, best video of this type I´ve seen so far. but something I´m still uncertain about: where can I get new screens from? and do they have something like any special product names I need to know to find them? do mobile phone or electronic equipment shops sell them? does apple do it by itself? or do it´s partners do so? if not: are they even legal? and how much do they cost (from ... to ...) ?
Thank you in anticipation, james
jessejames0096 1 month ago
i was broken my camera u_u
jajalitos91 1 month ago
Hey I was wondering what is the glue really called? (adhesive). And where do you get your parts? Digitizer and LCD
pubboy17 1 month ago
@pubboy17 Hi PubBoy -- You can get all of the parts, tools, repair videos, and flowcharts on our website! Feel free to check out our DIY Page!
ICRACKEDiPhoneRepair 1 month ago
I HAVE THE SAME IPOD AND ITS 8 GB AND ITS A BLACK ONE , MY QUESTION IS CAN I SWITCH THE SCREEN DIGITZER FROM A BLACK TO A WHITE DIGITIZER ? WILL MY IPOD STILL WORK ?
caliwest2011 1 month ago in playlist iCracked Repair Videos
@caliwest2011 HI CaliWest! - We can definitely change your iPod to white as the parts are interchangeable. Just make sure you're getting the highest quality of parts
ICRACKEDiPhoneRepair 1 month ago
@ICRACKEDiPhoneRepair i changed it to white , and everything is good except that my touch screen isnt workking, And i tried restoring it and turn it off but it still doesent work , What should i do ?
caliwest2011 1 month ago
@caliwest2011 Hi CaliWest - It sound like your digitizer isn't fully connected. Did you hear it snap into the logicboard? I would try a hard reset if you haven't already, see if that helps. If not I would check to see if there' any damage on the digitizer cable or if its not properly connected!
ICRACKEDiPhoneRepair 1 month ago
@ICRACKEDiPhoneRepair Thanks , it is now Working , Thank you very much
caliwest2011 1 month ago
@caliwest2011 Okay everything is working except my camera , like it just stays on the shutter part , you think theres something wrong with the camera ?
caliwest2011 1 month ago
Glad we could help you with the parts and video! Feel free to call our hotline if you need any help when doing the repair. As far as your home button question, the home button is held onto the screen assembly with an adhesive "skirt" that you take off your old screen and place it onto the new one. Its very easy and we show you how to do this in the repair video above. This "skirt" allows the homebutton to move freely.
Hope this helps! All the Best,
-The iCracked Team
CampusRadar1 1 month ago
hi i just odered my kit and i am getting a new home button two, im just wondering how would i put the home button in place with adhesive and still make it move freely? i mean like clicking in. Thanks
xGodzAssassin 1 month ago in playlist Favorite videos
What adhesive did u use
Eman5299 1 month ago
Great Tutorial!! Just did this repair and worked a treat! Had one problem with it and that was it wouldn't turn on I guess because I didn't power down before I started?? But holding down the home and on/off button for 10-15 seconds re started it YAY :-)
irelmo69 1 month ago
@irelmo69 Great job irelmo! That's exactly right - If for some reason your iPhone, iPod, or iPad is not turning on, attempt to do a "Hard Reset" holding the power button and home button at the same time for 30 seconds and its should reboot the phone. This will happen if you do not power off the device before beginning the repair. Not to worry though as it will not affect the performance of your device!
ICRACKEDiPhoneRepair 1 month ago
Comment removed
irelmo69 1 month ago
can u use some thing else then the heat gun
thekidaossthesteet 1 month ago in playlist Liked videos
@thekidaossthesteet Yes you can use a standard iron as shown in this video!
ICRACKEDiPhoneRepair 1 month ago
@ICRACKEDiPhoneRepair how do u deal with these stupid questions!?
waheedx97 5 days ago