Added: 4 years ago
From: kylemonkey
Views: 1,125,669
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (1,709)

Sign In or Sign Up now to post a comment!
  • hi

    i'm from india the problem is that the manual is not supplied in india from which site u have ordered so i was just thinking that you could send that pdf or that booklet scan it and send to me to my e mail it would be great if u send me

    divyanshusingh9629@gmail.com

  • Good afternoon, my name is Mauro Rodriguez and I am from Uruguay, I really liked this video as a go-kart did, I wanted to ask if you got the manual with which you made the kart in PDF or some other format. if you have time you got and I'd appreciate it miur2000@hotmail.com sent to me. Of course, thank you very much.

  • Comment removed

  • omg ur just wick funny lol

  • good job kid !

  • Where did you get the design? Great kart.

  • Oh my eyes!..... *-*

  • great job bro i love the fact that you pratically rebuilt the clutch system but what was up with the front wheels they looked a little cockeyed but hey it ran and that is all that matters again great job

  • dude if u still have that u should enter it in a race b!tch:)

  • Those welds.............

  • u should make the front sturdier it looked lit it would fail

  • Where did u get the disine of the frame?

  • can you do an up date vid love to see it now

  • Steering armatures should be behind the front wheel to increase steering torque in hard turns. You have weak points in your front suspension, the shock coils should be directly inline with the frame, not offset; that joint WILL fail, so be careful.

  • which state was that video from ???? 

  • оце драндулєта зробив. краще пішки

  • hi just wonder if you will be abel to show a vid of the plans thanks bmx boy

  • Not trying to criticize you. But it would have been better for the motor placement if you re-did the back end and made it independent suspension so the weight distribution would be even. I know you went by the book, but you could have tweaked it.. maybe next time. Great Job though.

  • you need smaller more narrow back tires

  • haha push 5 a whole bunch of times

  • LOL listen 2 the guy holding camera at 5:58

  • does it have reverse

  • so facking great !! :)

  • mui buena tu idea te lo copie

  • the engine sounds like an endless stream of sloppy shits splashing into the toilet

  • Those front tires are going to wear like shit.

  • yea is very cool

  • aaaaaaaaaaaaaaaahh my eyes!!

  • Wow,your good at building Go-Kart. Wish i can have ride on it.

  • press 5 alot and get ready to laugh ur ass off. stroke stroke stroke...

  • press 4 alot and get ready to laugh ur ass off. stroke stroke stroke...

  • I drew up plans for a go kart the other day.. And at first I was skeptical.. then i found this.. and now i KNOW... if kylemonkey can build a go kart.. I can build a go kart XD

  • is ther anyway i can get this plans for free????

  • press 7 lol

  • not bad

  • молодец лапаухий

    ток надобы колёса переднии править

    развал схождение=)

  • is it hard to weld?

  • take the motor apart and clean it up. sounds like shit

  • @88kornhead Sounds like a Harley...for a cart, it's ounds pretty powerful in my opinion. Kind love the sound of twin cylinder engines.

  • AMAZING!!! smart and funny!!! ^_^ who would have guessed..?

  • This go kart sounds like a wet fart.

  • 1:08 this guy is so beautiful :D

  • I'd like to see him wreck!

  • did you angle the front wheels inwards on purpose, by accident or is it just me?

  • @Skatesfy its from the suspension

    

  • That things awsome, im planning on doing something similar myself, but one thing though, does havin the engine mostly on teh right side cause any balance issues, since it is pretty heavy?

  • to learn how to lubricate a go kart clutch or how to install band brakes go to: go kart clutch lubrication or installing band brakes by: george2011k

  • Your in Arizonaa Arent You? :p I think i have been down that rodee

  • Would u like to sell your quad as is

  • Press 7 really fast. He's jacking off the starter rope.

  • 2:16 LOL

  • i see where you get your youtube name from

  • 1:09 did I hear what I thought he was going to say " I've just been snatching a bunch of co---- Parts"

  • lol very big... THATS WHAT SHE SAID!!!

  • i love this video :) i watch it all the time :)

  • is the motor off a lawn mower?

  • Press 3 a shit ton of time get ready to lol.Oh, good job on the go kart dude.

  • @FunnyjunkerATV LOL!!!!!!!!!!! WHAOAOAAA

  • @FunnyjunkerATV I dont get it.

  • Monster Garage

  • @zeroaesquerda93 why did u responded with space?

  • keep presing 7 the rope is happy!!!XD

  • whats the gear ratio

  • /watch?v=8H131qg31qg

    akira bike

  • um ive just bean snatchin a bunch of cock ahum parts

    1:08

  • More Happier?

  • Its pretty awesome but maybe a bigger front tire? and the front suspension slanted a bit? But damn that thing is awesome! i wanna build one so bad.

  • its illegal to drive without a license :D hope no cop watches dis :D

    (ps: if u have a license well good for ya :D)

  • @XiaoWarlock Its only illegal to drive with out a license on public roads. You can drive on private property with out a license all you want.

  • LMFAO an 18 HP Motor.. my gokart has a 75HP motor on is XD (Its modified gokart)

  • nice job

  • Epic M.A.D Magazine face in 3:13

  • welding kills cameras

  • LOL @ 3:10

  • I so want one! Cool Soft Suspensions!

  • you should like mount an air horn on it lol

  • a video where ur not doin something stupid:)

  • wow almost a million views, who'd a guess

  • Kyle, Good job on the cart. The camber is a bit excessive on the front wheels which will wear your front tires down fast if you ride on pavement much but other than that it looks and runs great. You and your friend should start a kart company.

  • 102 people went blind from the Welding and clicked the Dislike button.

  • @RocknLee But if there blind how can they click the dislike button!

  • the wheels are loose in the front

  • cool

    

  • how did u put the cain attached to the crankshaft sticking out of the engine and the and of the wheel axis thingy without it breaking sience the crankshaft is always spinning.. PLEASE HELP!!

  • @seelder its called a centrifical clutch it has shoes that go out useing centrifical force and they grabb the clutch hoseing when the engine is at idle the shoes dont grabb and his clutch hoseing is welded to a pully clutch witch is bacicaly the same thing

  • @TheDabomb57 thanks!

  • @seelder u need a centrifugal clutch with a keyway that matches you sprocket and you need a sprocket for your clutch if you dont have one

  • Hey, could You give me the plans of this cart somehow? or show me where I can get them. Thanks

  • how much was it

  • ...'this is the video i showed during my presentation'

    um...the filmer said "fu*k" o-o no one heard that? XD

  • you guyss are haterz nice go kart kylemonkey you should make another video about the book and the pages so we could see how to make a go kart

  • the engine sounds like its only firing on 1 cylinder

  • Beautiful! Beautiful! Amazing go kart

  • alguien tiene los planos de este kart??? compartanlos

  • im makeing this go kart too i will post soon

  • great cart

  • @mrrandom99lol ur stupid, there tilting in not bent. and if u knew anything about go karts then u would know that tilting the wheels in helps the stearing,

  • why is the frontal axel so fucked up? I don´t understand. Please I need more explanation if possible, Many thanks

  • the front axel is fucked up..

  • Hi i'm aldo, how obtained the plans for the Go kart?

  • Along with melting of tires and serious injury, lmao

  • WOW THIS KID ACTUALLY DID SOMETHING USEFUL 

  • No, take that motor off, and strap a 1000cc streetbike engine to it (:

  • @xLTZ400BOIx yeah :D although I think it would rip the frame apart :D 

  • Hey KyleMonkey, I was wondering how you purchased your plans...I tried to order them off of Dons DIY but it wants me to send money directly to a bank in Germany?? Did you do this?

  • See the POISON CHEMTRAILS in the sky at 6:19.

  • @alltvisanimated is it dangerous?

  • @BrundukasLT Type the word "Chemtrails" in the youtube search box and you decide.

  • are the front wheels suposed to be that way?

  • @1337bman yeah its cos of useing a short shock on A arm suspension it makes the wheels have a mountain load of camber if he replaced them with longer / stronger shocks the wheels would be a lot closer to vertical hope this helps mate :D

  • I see y he calls himself Kylemonkey

  • hey its that dude from "you WILL piss your pants if you watch this video" search it on youtube

  • ///------\\\ BENT 6:09

  • look at the front wheels BENT 6:09

  • kyle you look to be about 18 lol this is sweet shit there are ppl who wont get off there ass to do this and i love doing this kind of stuff so this si sweet :D btw im 14 and im the only kid in my school that does this kind of stufff

  • Need a little bigger front wheels.

  • does it have reverse

  • im impressed with ur commitment. good job guys

  • Nice weld

  • nice work

    but the engine sounds a bit ridiculous :)

  • Comment removed

  • THATS NOT BAD

  • 1:30 will see that later

  • Does anyone know where to get the bearings/bushings for the swingarms?

  • You should but smaller ratio to transmission, so it would accelerate faster.

  • Good job! The front tires got a hell of a negative camber....and the exhaust sounds like pooop.....but honestly really good job. I thought you were a Cotton headed ninny muggin before I saw this vid hahaha

  • cool!! You're intelligent! Keep working hard like that, and your future will be bright.

  • Comment removed

  • @ProRigWelder Seems like you're the only fag who's talking about "work the rod." Did your dad teach you how to "work the rod"?

  • 6 HORSE POWER

    nice!!

    tssss,,

  • i think you should put bigger wheels on the front

  • Nice" but it looks like the front tires are laying in to far .. maybe not anyway what a cool ride good job.

  • i woulda turned it into like a pedal one n fuuckin drove it around town hahahahahah

  • hell i like it ....i made 1....... and ummm yaaaaa... the wheels are from my dads ford f150 he bought new ones and i was on a low budget

  • Lol the practice weld at 0:18! you don't drag for mig!

  • And our parents trusted you with power tools? :/

  • call it the kyle-mobile

  • awesome! the only bad thing is the front of the kart, if you hit something your feet are the first what hits... and the front part is ugly, but still very nice job!:D

  • The front wheels have hella negative camber, NICEEEEEEE.

  • lllllllllllllllllllllllooooooo­oooooooooooooooollllllllllllll­lllllllll

  • lol

  • cooooooooooool

  • SPOCK!!!

  • do u live in colorado? i just went there on vacation and it looks similar

  • Hey, I remember you. You have been on Existenz.se

  • RESPECTO A LA JOG

  • legit man, very legit =P

  • In today Germany systematic maltreatment of children is organized by the state and executed by snitchers.The psychiatric literature holds many reports of jewish children having been persecuted in exactly this way.Since WW2 psychiatry was regularly misused by Germany to discredit and persecute the NAZI victims.Germany pretended to pay compensation to get the former victims into the hand of shrinks certifying them being mental cases due to persecution.Sometimes they even got some 100$ compensation

  • If you used wheels/tires on the back that are the size of the front ones you'd get a lot better acceleration. Rotating mass soaks up power big time.

  • i would of stopped after the tire

  • Hell yeah! One question, does it have reverse? lmao!

  • that shit is a beast

  • hey i watched the r.i.p. for harry i was wondering what happened to him if you dont mind telling me and so sorry for ur lost he looked like a great guy

  • how fast does it go

  • where do u get a welder?

  • 1:08 "i'v just been snatching some co(cks), umm..parts"

  • @abadon115 HAHAHAHAHAHAHA! He definately ha.

  • good work but u need stronger tie rods

  • Go Insure That Thing

  • whats the cutter tools name 0:30?

  • @SvenskFilm2 .. that's a die grinder, bud...

  • @SvenskFilm2 .. that's a die grinder, bud...an air die grinder

  • And don't listen to those guys who left those mean comments they could never build something like this

  • That's really cool but 16 hp isn't that fast my dirtbike has 26 hp no joke but still that's a really cool project

  • get a much bigger sprocket

  • This was sweet!

  • good job man, looks awesome

  • ur good at making a go kart! cool

  • nice luks retarded but it luks lyk its goin to wurk kul. nice job.

  • not bad.. cool i would love one

  • LMFAO @ 5:59

  • hey dont listen to these fags you did a sweet job on that go kart!! im going to try to make one as well!! because we get savage ice at the winter and need something to play with!! take care

  • Nice!

  • Why the fuck did you take a close-up of welding?!

    ARE YOU A FUCKING LOW-MINDED MORON!?

  • @puppett11 Watch your language, young man.

  • @puppett11 it cant do damage on a bit of film you noob.

  • @FUCKEDeanMusic

    "noob?"

    It seems like..

    We have a retard in our mitts.

    "playMusic csi_miami_theme 15 onquote "horatioend" "

    playmusic=True