I agree that you should let the bike warm up properly, but the myth about breaking one in is flase. You should never pin the throttle of a bike without a load on it. When you are breaking it in you need to put miles on it and make sure to go up and down in the rpm range during the first couple hundred miles. Dont just get on it and run 60 for 500 miles. Break the bike in how it is going to be riddin...
@asicswrestler2003 You'd have to be a fucking retard to install these backwards. Think about the angle of the pipe from the muffler inlet. They'd stick out like a turd in a punch bowl!
Die RamAir abdeckung in schwulen Rot Lackiert,aber den hässlichen Nummernschildhalter noch angebaut..Euch Amis haben sie echt ins Hirn geschissen..kein sinn fürs wesentliche,ihr Eimer.
question. y is it that '09 r1 sounds dif. than '08-'07 r1s? or may be, my hearing aid is off, lol. 'preciate it. bad ass bike u got there bro! peace...
Hey what do you mean by broken in? and how do you break it in? and until you break it in, you can't ride it? I"m sorry for all the questions, but i'm gonna get one soon and i just wanna know as much as i can about it.
@Ldgarl1 You SHOULD ride it when breking in, but you should not abuse it, ride easy. You break it in by just riding it and letting it heat up properly before every ride.
@Ldgarl1 Breaking in is letting the engine settle right, since it is new, the parts havent been expanded or used enough, so it needs some "breaking time" to adjust. Just like new shoes.
Shorty Levers:$225, Double bubble screen: $75, Graves slip on exhaust:$1,150, R&G Sliders and spools:$250, Comfort seat:$200, GYTR tank pad, rear set and gas cap trim:$60, Graves flush mount frount turn signals:$110, Custom LED integrated tailight:$145, GYTR Carbon FIber front tank and chain guard:$350...TOTAL: $2,565.00... Having a BadAss bike like this to "ride off" a crappy day at the office: PRICELESS...
Greggs Customs has a sick FE but doesn't have them for sale yet. Trust me it is on my list. Custom LED has the integrated turn signals in the tail light so the tail will be CLEAN very soon.
Right on. Seriously awesome, awesome bikes. The only thing I can't scream about on the new R1's is the seemingly steep angle the windshield sits up at. But I wouldn't hesitate to swap my R6 for one if I could haha.
The clear stock windscreen sat much lower than the after market dubble bubble. I do love the double bubble though because it really changes the airstream when I am tucked and flying on the highway.
Yamaha says keep it under 6900 RPM for the first 600 miles. Drain and change the oil, tighten the chain, etc. at 600 miles also. Then keep it under 8300 RPM until you reach 1000 miles...then its ON! What you need to concentrate on the most is fluctuating between gears and RPM's. I have heard that you don't want to keep the engine in any gear or specific RPM for any long periods of time.
dude you got $1200 exhaust and couldn't get the $100 fender eliminater, lol, but keep on keeping on, thats a sweet ride, getting the same one, but doing akra's, where are you from, Ny is the last place to get these damn things, we don't have them yet and I wanted it last month
Matt, California got the bikes before anyone had next to anything to order for it. Gregg's Customs released the fender eliminator as of this week as did Yamaha. I have a fender eliminator and all the possible carbon fiber pieces on order. I will post a walk around on or about the 28th of this month when all my carbon and eliminator kit is installed.
Love the bike. Great screen and pipes. All you need is a fender eliminator and you are set. Amazing how quick the 09 R1 spins up. Noticed while you were reving it. The reviews I've read also mention it. I've got an 05 and would love to upgrade. Very jelous
It really does sound great, Thank you. I did recently purchase the Hero mini cam from my local shop. I will be riding and filming as soon as we get a few consistent dry riding days.
fantastic bit of kit this, what do you mean broken in so you can ride it... your supposed to be riding it TO break it in, just staying under a curtain amount of revs.... that's how all bikes are run in.
Haha they are installed backwards!!
Gilliamanaotr 2 months ago
Damn!!! How much would one of those cost?
Maverick6141 7 months ago
learn to ride,get those chicken strips off the back tire.nice bike.
trophytaker100 9 months ago
is your right muffler hanging a little lower than the left ? i just bought the same set of slip on and its a little uneven with the right being lower
ghost31711 1 year ago
sexy sexy bike..
MacbookJack 1 year ago
I have the same setup but 2010. Graves, but I put them inverted. Check it out :) Sweet ride dude!
vaiosoft 1 year ago
id put em on the other way to look better
ausirider91 1 year ago
dude, id have sex with your bike lol
215Rollaz 1 year ago
I agree that you should let the bike warm up properly, but the myth about breaking one in is flase. You should never pin the throttle of a bike without a load on it. When you are breaking it in you need to put miles on it and make sure to go up and down in the rpm range during the first couple hundred miles. Dont just get on it and run 60 for 500 miles. Break the bike in how it is going to be riddin...
jmac03black 2 years ago
listen to my YOSHI CANS.
rheaMDC21 2 years ago
cool
firebirdx02 2 years ago
dnt u have them backwards, arent the curve of the pipes suppose to push the exhaust away from the light rather than towards the tailight
asicswrestler2003 2 years ago
no brother. check Graves' website. they changed the direction for this 2009. Ride safe.
GRIZZLYBAIRD 2 years ago
@asicswrestler2003 look at the logos. They're right
TheCoolMovement 1 year ago
@asicswrestler2003 Check out mine, I know exactly what you mean! I had them done that way, I liked it better. PC V. 170hp give or take.
vaiosoft 1 year ago
@asicswrestler2003 You'd have to be a fucking retard to install these backwards. Think about the angle of the pipe from the muffler inlet. They'd stick out like a turd in a punch bowl!
DaG37boy 6 months ago
Die RamAir abdeckung in schwulen Rot Lackiert,aber den hässlichen Nummernschildhalter noch angebaut..Euch Amis haben sie echt ins Hirn geschissen..kein sinn fürs wesentliche,ihr Eimer.
Kapauz67 2 years ago
Meinungen sind wie Arschlöcher, jeder hat ein ...
GRIZZLYBAIRD 2 years ago
Geschmäcker zum glück auch...
Kapauz67 2 years ago
@GRIZZLYBAIRD respekt, deine R1 is eine der geilsten die ich bis jetzt gesehn hab.. das rot passt perfekt dazu. thumbs up
GStar3294 1 year ago
yea definately not diggin the sound of the new R1
txpimpincali 2 years ago
have u guys been under a rock o9 r1 has crossplane crank
TheLaneyzf 2 years ago
question. y is it that '09 r1 sounds dif. than '08-'07 r1s? or may be, my hearing aid is off, lol. 'preciate it. bad ass bike u got there bro! peace...
bisdak510biker 2 years ago
naaa all inline 4s sound retarded like its gonna die and 1-3k revs once it hits past 8 is where all the sweet music is
soulofsteel9878 2 years ago
Hey what do you mean by broken in? and how do you break it in? and until you break it in, you can't ride it? I"m sorry for all the questions, but i'm gonna get one soon and i just wanna know as much as i can about it.
Ldgarl1 2 years ago
@Ldgarl1 You SHOULD ride it when breking in, but you should not abuse it, ride easy. You break it in by just riding it and letting it heat up properly before every ride.
romanosalvatore 2 years ago
@Ldgarl1 Breaking in is letting the engine settle right, since it is new, the parts havent been expanded or used enough, so it needs some "breaking time" to adjust. Just like new shoes.
romanosalvatore 2 years ago
just put deposit on 1 of these.could u tell me.did bike come with red rims around wheels
leostatts 2 years ago
yes, the red pinstripe is factory.
GRIZZLYBAIRD 2 years ago
very nice bike...awesome
Max2009Foda 2 years ago
I like this!
めっちゃ良いと思いますよ^^
dbhck123 2 years ago
best colour
hmfy 2 years ago
lol i live right by san jose
awwwwnaaaa 2 years ago
you now need a tail tidy ;) it will look amazing then
RossiTheDoctorR1 2 years ago
Now thats an orgasmic sound. Ducati better watch out.
CeeBee714 2 years ago
what a sexy sound.... but i like Akrapovic more ;)
cytechx 2 years ago
great lookin bike. the exhaust sounds sick. good luck with it.
italianogq21 2 years ago
Gotta love the Pittbull stands!
Ryan40272 2 years ago
awesome bike dude!! how much have u spend in all aftermarket produkts by now?
enfermoXR6 2 years ago
Shorty Levers:$225, Double bubble screen: $75, Graves slip on exhaust:$1,150, R&G Sliders and spools:$250, Comfort seat:$200, GYTR tank pad, rear set and gas cap trim:$60, Graves flush mount frount turn signals:$110, Custom LED integrated tailight:$145, GYTR Carbon FIber front tank and chain guard:$350...TOTAL: $2,565.00... Having a BadAss bike like this to "ride off" a crappy day at the office: PRICELESS...
GRIZZLYBAIRD 2 years ago
lol =)
well said!! congrats on that badass bike...
enfermoXR6 2 years ago
Just bought the same bike two weeks ago from San Jose Yamaha! Those guys rock. See you at the shop or on the road.
cpslomatt 2 years ago
TAIL KIT!! Asap! ;)
v8rangerboy 2 years ago
Greggs Customs has a sick FE but doesn't have them for sale yet. Trust me it is on my list. Custom LED has the integrated turn signals in the tail light so the tail will be CLEAN very soon.
GRIZZLYBAIRD 2 years ago
Right on. Seriously awesome, awesome bikes. The only thing I can't scream about on the new R1's is the seemingly steep angle the windshield sits up at. But I wouldn't hesitate to swap my R6 for one if I could haha.
v8rangerboy 2 years ago
The clear stock windscreen sat much lower than the after market dubble bubble. I do love the double bubble though because it really changes the airstream when I am tucked and flying on the highway.
GRIZZLYBAIRD 2 years ago
Hm. Maybe it's just the way the front edge of the fairing is angled then. They all seem steep to me but I'd still ride one :)
v8rangerboy 2 years ago
AWESOME BIKE BRO......
mazher1979 2 years ago
I sure wish my 250cc single sounded like that, then I wouldn't bother get a bigger one.
marcellon2003 2 years ago
does the US models come with gold wheels on black?
810Z 2 years ago
Nope. Black rims with the red pinstripe only...as far as stock goes. I believe the European model is gold on black though.
GRIZZLYBAIRD 2 years ago
Dude thats sick im buyin my raven nextweek i cant wait
=)
grim350z 2 years ago
is this bike easy to use around town?
10secndzTT 2 years ago
Oh yes! and the different throttle settings make all traffic conditions manageable.
GRIZZLYBAIRD 2 years ago
very nice bike.
maybe I should change my 08 R6
cocko999 2 years ago
Very nice machine bro! Congrats and ride safe brother!
djqx 2 years ago
this is very nice
gabow10 2 years ago
Finally an inline 4 superbike that sounds superb!
tvo0007 2 years ago
Yamaha says keep it under 6900 RPM for the first 600 miles. Drain and change the oil, tighten the chain, etc. at 600 miles also. Then keep it under 8300 RPM until you reach 1000 miles...then its ON! What you need to concentrate on the most is fluctuating between gears and RPM's. I have heard that you don't want to keep the engine in any gear or specific RPM for any long periods of time.
GRIZZLYBAIRD 2 years ago
Yes the Graves came with the large CF shield for the right side and the smaller CF on the left side.
GRIZZLYBAIRD 2 years ago
mate, it sounds insane.. you lucky duck...
sallythescorpion 2 years ago
far out ! sounds awesome i hope most inline fours start going this way ! mean as ricer that sounds like a twin good show mate
guevonpavo 2 years ago
damnnnnn!!!!!
brocklndrs 2 years ago
how does it ride??
brooklyn168 3 years ago
Damn near takes itself to the track!
GRIZZLYBAIRD 2 years ago
looks porn mate, your a lucky man!!!
dannyfsr 3 years ago 2
how much did you get your R1 for? i was quoted 12,050 out the door and a guy in NY got one for 11,700. i'm in Newport Beach CA.
econjoegreen 3 years ago
i live in san jose!! lols well..i used to, moved to hayward tho and wow dude!! kickass bike!! especially the headlights tho!! its a beast!!
tsukiee123123 3 years ago
no like ilike more 2008.
COMECUCA16 3 years ago
sounds like a twin down low
fre2fly 3 years ago
Beautiful R1.. you paid around 11.5k for it right
Jurkowski1987 3 years ago
dude you got $1200 exhaust and couldn't get the $100 fender eliminater, lol, but keep on keeping on, thats a sweet ride, getting the same one, but doing akra's, where are you from, Ny is the last place to get these damn things, we don't have them yet and I wanted it last month
mattballs21 3 years ago 4
Matt, California got the bikes before anyone had next to anything to order for it. Gregg's Customs released the fender eliminator as of this week as did Yamaha. I have a fender eliminator and all the possible carbon fiber pieces on order. I will post a walk around on or about the 28th of this month when all my carbon and eliminator kit is installed.
GRIZZLYBAIRD 3 years ago
Love the bike. Great screen and pipes. All you need is a fender eliminator and you are set. Amazing how quick the 09 R1 spins up. Noticed while you were reving it. The reviews I've read also mention it. I've got an 05 and would love to upgrade. Very jelous
rogase68 3 years ago 3
sweet bike!! sounds beastly. you gonna give us some riding vid's anytime soon? ride safe :)
MikEtheGimP 3 years ago 2
It really does sound great, Thank you. I did recently purchase the Hero mini cam from my local shop. I will be riding and filming as soon as we get a few consistent dry riding days.
GRIZZLYBAIRD 3 years ago
Congratulations! I think is the best bike ever and I am getting one too. What do you think about the tank pad? Is it really a good idea?
acpowerbat 3 years ago 2
Thanks. Well I prefer the tank pad over a scratched gas tank due to belt buckles and riding gear zippers and such.
GRIZZLYBAIRD 3 years ago
nice bike sexy color its better on blue still sexy did u give her a name
evaant14 3 years ago 2
Thanks. Nope haven't named her yet, still breaking her in. Once I get on her for real I'm sure it will come to me.
GRIZZLYBAIRD 3 years ago
fantastic bit of kit this, what do you mean broken in so you can ride it... your supposed to be riding it TO break it in, just staying under a curtain amount of revs.... that's how all bikes are run in.
hgjisnfdlishdjthlre 3 years ago 3
Exactly what I meant. I can't wait til she is broke in and I can really get on the throttle. I am riding her to break her in thanks.
GRIZZLYBAIRD 3 years ago
ah ok bud :) happy riding then :)
hgjisnfdlishdjthlre 3 years ago 3