thanks, good video. could have used more instruction on removing the light, but I could use more instruction in lots of things. thanks again, I'm trying it tomorrow.
I think I'm getting sick from the foam dust I've been trying to sand off of the headliner board. What a pain. I was going to wear a dust mask but I hafta cut a small hole for my cigarette. Anyways, can't wait til I get it back together.
i am sure that by now your headline has come apart from the shell, since anyone who is a real trimmer/upholsterer knows that 3m adhesive does not work . also, those little things that you use for the hex screws are called allen wrenches and the "things" that hold the shell are called mouldings. PLEASE! not every pro trimmer is like this guy who does not have the right tools and has no idea of what he is talking about! this should be called the MICKEY MOUSE WAY OF REPLACING YOUR HEADLINER
how did did u place the foam onto the headliner? one second u were spraying the other second it was on the ceiling!! Everything else is in great detail, but not the most important part. 3.5 stars.
Hey bro...My celing rattles b/c of my woofer in the back of my truck. I want to replace my headliner, so how do i soundproof the headliner so it wont rattle?
the way to sound proof your headliner .. is when you take it out .. leave it out..lol.. just kidding ... my opinion what i would do is add an extra peice of foam so that it is tighter and more sound absorbent when reinstalled..ps.. not my video
ok....seriously??? dont listen to him..... he has NO idea what he's doing.... dont use 3m. unless you want it to fall down within a year. I use professional glue through a siphon feed glue gun. you have to make sure to spray the headliner and the material.... if you dont wait long enough for the glue to tack it will cause bleed throughs on your material.... fold the material in half starting in the middle and rolling it out. It isnt hard, but this guy is very misinformed
Do you know a good video or website that has good instructions? Cause I have the fabric and just need to know how to actually glue it on, the right way.
Im doing mine right now in my cherokee. And I was wondering if that glue you used is still holing up for you. I was going to roll on cotact cement but if I can use the spray I would.
Awesome, thanks for the spray adhesive tips, I used a 3M "40" spray adhesive and the headliner fell down, I am goind to try some 80 or 90 and see what happens
This comment has received too many negative votesshow
Mother fucker ... i waisted 7 minutes of my life on ur retarded VIDEO ! and u didnt show the most important PART , of how to install THE FABRIC !!! KILL URSELF
I just did mine. When installing one of the clothes hooks, my pillips screwdriver slipped off the head and poked the headliner. It left a small depression but did not penetrate. Any way to fix that without redoing everything again? Thanks.
My Chevy truck has a sagging felt headliner. You just showed me how to replace the fabric. Thanks for posting your experience with fixing the headliner. It may take more work to film but others like me have benefited.
This was very informative, except I do have a question. Do you lay the headliner onto the shell and then cut out holes, are do you buy the headliner specifically for your vehicle with the holes precut? I fully intend to do this to my car.
thank for the advice good video
liquidgooroo 1 day ago
this guy.. is an idiot...
iamonewithit 1 week ago
Not helpful at all. You should know the names of the items you are working with if you are competent.
dtaylor81 1 month ago
2 words. Staple Gun, speaking from experience here
imabichover9000 2 months ago
very nice.....
silvaraci 2 months ago in playlist CARS
9:42
YEAH
TehChiken 2 months ago
wow i didn't know that he was so intelegent that he ahd to show all of us how to take out screws wow amazing duuuh
MrTarkus007 3 months ago
theres somethin eerie about this video
lc949 3 months ago
Y does he keep staring at the camera after speaking it's fukin weird
deeman509 4 months ago
thx darbone
johnnyrocketship 4 months ago
thanks, good video. could have used more instruction on removing the light, but I could use more instruction in lots of things. thanks again, I'm trying it tomorrow.
darbone 4 months ago
Obama sticker.....makes me sick
TheXJthatCould 5 months ago
this guy is fucked up lol,. note to self don't huff spray adhesive.
nrb8609 7 months ago
lol @ 8:55
Quanni90 9 months ago
Good idea on not removing the seat belt screws, those things are a nightmare!
bddc201 10 months ago
useless video
JasonCalcaterra 10 months ago
WTF, you don't show how to lay-out the the headliner material? 9 mins of you stroking a can of adhesive?
hipsociety 10 months ago 4
thank you! very helpful
jg29064 1 year ago
how can i remove the clips? for ford ranger.
ricojudo 1 year ago
good job thanks for your video
utsports 1 year ago
how do u take out the headline from a car? do u remove back window?
iiNaRcOtIkZz 1 year ago
pretty good tutorial
im getting some designer coach fabric and some tin foam and doing this, im probly gonna need more glue though
psyfertech 1 year ago
Very instructive, thank you for taking the time to make this video. Dude you saved me $150
adriteamo4450 1 year ago
very instructive but boring....
DJAlup 1 year ago
this guys a gOOn
paintball2591 1 year ago
I have an 08' Jeep Liberty with the sun roof..could you install one of those headliners? also is it possible to match the factory fabric??
bluehorse888 1 year ago
last 5 seconds ftw
bradmartinfl 1 year ago
ya! go jeep!
climbamtn111 1 year ago
You basically made a bollocks of it... haha.. You should edit for discovery channel lots of talk and no action..
Thevoiceofreasonful 1 year ago
lol 6:54
crodriguez4477 1 year ago
LMAO bless you !!! ahahaha
Roosterbones27 1 year ago
Decent video. This helps me out some as i'm geting ready to replace my sunroof. Gordo. I don't see anywhere here that he claims to be a professional.
1ace1966 1 year ago
Thanks that helped allot.
RueDOrleans 1 year ago
I think I'm getting sick from the foam dust I've been trying to sand off of the headliner board. What a pain. I was going to wear a dust mask but I hafta cut a small hole for my cigarette. Anyways, can't wait til I get it back together.
cddragonslayer 1 year ago
this video is great lol
andysciro1 1 year ago
When he sneezed I started laughing pretty hard.
Redbull357 2 years ago 10
use some of that 3m glue for ur hair, an learn how to say correct parts if ur makin a how to video,
ironworksfree 2 years ago
LMAO!!!!!
jerkdogg 2 years ago
@ironworksfree what did he say that was not correct?
TheJungleCook 1 year ago
I see a Cummins in the background with a banks power decal. He knows what he's doing.
deathforprez 2 years ago
i am sure that by now your headline has come apart from the shell, since anyone who is a real trimmer/upholsterer knows that 3m adhesive does not work . also, those little things that you use for the hex screws are called allen wrenches and the "things" that hold the shell are called mouldings. PLEASE! not every pro trimmer is like this guy who does not have the right tools and has no idea of what he is talking about! this should be called the MICKEY MOUSE WAY OF REPLACING YOUR HEADLINER
gordo3911 2 years ago 2
instead of saying marry then explain yourself, why not say...PUT THE FUCKING NEW LINER ON THE CASING
jeppoification 2 years ago
looks like a dumb ass
funsnap 2 years ago
how did did u place the foam onto the headliner? one second u were spraying the other second it was on the ceiling!! Everything else is in great detail, but not the most important part. 3.5 stars.
lRilLlLa 2 years ago
Lets just class action sue the industry for being aholes and making this happen.Headliners are obviously planned to fail.
Jimala3 2 years ago
Agreed.
DodgeMan360 2 years ago
NOTE TO SELF .. shake can every 5 seconds to refill it ..lol
james92y 2 years ago 8
Hey bro...My celing rattles b/c of my woofer in the back of my truck. I want to replace my headliner, so how do i soundproof the headliner so it wont rattle?
insightdeluxe2 2 years ago
the way to sound proof your headliner .. is when you take it out .. leave it out..lol.. just kidding ... my opinion what i would do is add an extra peice of foam so that it is tighter and more sound absorbent when reinstalled..ps.. not my video
james92y 2 years ago
Dynamat ftw!
sqhschief 2 years ago
FUCKIN' CRACKLIN! wHATthefUck!!
PimpXXXGuitarist 2 years ago
THIS GUY CAN REALLY GET A JOB AT GM
wilf4210 2 years ago
Still holding up great...good luck
johnnyrocketship 2 years ago
ok....seriously??? dont listen to him..... he has NO idea what he's doing.... dont use 3m. unless you want it to fall down within a year. I use professional glue through a siphon feed glue gun. you have to make sure to spray the headliner and the material.... if you dont wait long enough for the glue to tack it will cause bleed throughs on your material.... fold the material in half starting in the middle and rolling it out. It isnt hard, but this guy is very misinformed
laurasp33 2 years ago
Do you know a good video or website that has good instructions? Cause I have the fabric and just need to know how to actually glue it on, the right way.
burtonsnobrdr89 2 years ago
lol....i gotta get me an "oh shit" bar for my car.....old one broke
summerdude600 2 years ago
good vid, but could have showed how you install the headliner material onto the shell. Tools and process.
Good stage presence
gst69man 2 years ago
gst69man....good stage presence?????? seriously did you say that
pinkystinks 2 years ago
Im doing mine right now in my cherokee. And I was wondering if that glue you used is still holing up for you. I was going to roll on cotact cement but if I can use the spray I would.
brianwurst1234 2 years ago
So how do you married the fabric to the shell, dumb ass.
gilham88 2 years ago
Dembel, it's headliner, not fabric, use adhesive.
86Pacer, I wish I knew, this one had a few depressions from where I pressed too hard. Caution!
johnnyrocketship 2 years ago
Awesome, thanks for the spray adhesive tips, I used a 3M "40" spray adhesive and the headliner fell down, I am goind to try some 80 or 90 and see what happens
Kamdelion 2 years ago
This comment has received too many negative votes show
Mother fucker ... i waisted 7 minutes of my life on ur retarded VIDEO ! and u didnt show the most important PART , of how to install THE FABRIC !!! KILL URSELF
Dembel97 2 years ago
Nice language Dembel! Is that how you walk through life?
youngestoutof4 2 years ago
@Dembel97 Use common sense, you fucking mark.
vitis1 1 year ago
I just did mine. When installing one of the clothes hooks, my pillips screwdriver slipped off the head and poked the headliner. It left a small depression but did not penetrate. Any way to fix that without redoing everything again? Thanks.
86pacer 2 years ago
This was really good - thank you for posting it.
needawank 3 years ago 3
what a dumb shit
rickyeveritt 3 years ago
ure hott!
carapot 3 years ago
Looks like you sprayed that Adhessive in your hair..
g2rw09 3 years ago
I should have to slick up the hat hair. Although I recommend Hair Glue by Schwartzkopf.
johnnyrocketship 3 years ago
How To Install or Repair Headliner.
for a mercury comet or maverick 71.
if you know the answer, thank you very much.
pezesfish 3 years ago
Sorry, I had a Buick Skylark changed out but we didn't film...my apologies.
johnnyrocketship 3 years ago
@pezesfish same as any other car. pulling out the stock headliner can give u an idea. you can buy the fabric and do it, cut it and fit it yourself
adfasdfasdfluy 1 year ago
My Chevy truck has a sagging felt headliner. You just showed me how to replace the fabric. Thanks for posting your experience with fixing the headliner. It may take more work to film but others like me have benefited.
LeoCavazos 3 years ago
This video was actually informative and hilarious!
tornadosoul7 3 years ago
You cut out the holes after laying it on, sorry for the late reply.
johnnyrocketship 3 years ago
excuse me, or* not are
melissaxxxsarah 3 years ago
This was very informative, except I do have a question. Do you lay the headliner onto the shell and then cut out holes, are do you buy the headliner specifically for your vehicle with the holes precut? I fully intend to do this to my car.
melissaxxxsarah 3 years ago
that handle he is playin with at 3:25 its call the O SHIT HANDLE
scottjeep97 3 years ago
after watching this, I realized cutting the roof off my Jeep was not the first step
dkheesch 3 years ago