TM P226

[Greataardvark]

lol at the ending... WOOF

[TaZ101SAGA]

I have this gun, im using ultra air power gas when i fill the magazine with gas for about 4 seconds i only about 3 shots off at the most before it runs out. What am i doing wrong?

[SgtSplatter782]

@TaZ101SAGA you might need to oil your airsoft gun. if not you might need to charge the mag for a slightly longer period. also hold down on the can and press down hard. sometimes the fill pin doesn't get depressed down far enough for a complete fill.

[TaZ101SAGA]

@SgtSplatter782 Its ok now ive solved the problem.

[goongamer123]

Well since im holdind the KWA version in my hand an its a 100% replica (bar trade marks) i can safely say there is no safety switch...only a decocking switch

[megamanex888]

there is a safety

[jamesaird]

@megamanex888 there isnt sig pistol models dont have safteys the have de-cockers instead as its a double-action pistol

[megamanex888]

@jamesaird i know there isnt on the real version, but the airsoft version does, i dont know about the tm model but the kjw model has one

[maher787]

je to len "hračka" ale je paradna ja ju chcem :)

[Slaughter619]

Il ike the skeleton sidearms p226 more then the TM. plus the SS is tm compatible, so ya, more cost efective, and just as versitile as the TM acsesorie wise

[njbskater123]

the safety on this gun is hard to find but it is on the switch which allows you to take the gun apart you just have to pull that out a bit of push it in from the other side this will put this pistol on safety

[Mrawwsum]

wheres the safety

[limeheadrickey]

all of thos special effects ar given me a fukin epilepsy attak

[mpostr3]

nice video :)

[wzheng1982]

The doggy is funny

[yamahaGrc20]

r u usin 134a or green gas.

[SteamFox]

134a

[VIRUSexe24]

Wrong loading!

[SteamFox]

You already posted that 3 weeks ago.

[misturRay]

nice demo, very nice sound of the blow back

[ostmash]

wow nice editing :D looks almost like a hollywood movie!

[2002nickname]

Cool demonstration!

[VIRUSexe24]

DANGER! BAD LOADING!

[dsmvlado]

Your loading your magazine wrong... you dont load it up from the top like that.

In the TM P226 you slide the thing all the way down, and then, put in bb's from the bottom.

[SteamFox]

I know that now (read the description). Thanks anyway.

[driftinsti]

he's not loading it wrong... there are many ways to load a magazine. Its just preference.

[dsmvlado]

Do you own this gun... if not shut up please... cause your making yourself look stupid.

When loading from the top you have to actually press on the bb quite hard to get it in... on the bottom you just put it in.

It was obviously designed to be loaded from the bottom. and its one of the only mags that does this for GBB's.

[driftinsti]

....sigh*... those who kno nothing bark the loudest.

[dsmvlado]

Your an idiot... do you actually OWN a TM P226.... if not STFU!

[driftinsti]

wow....u really do kno nothing. lolz....

[Pflargelt]

cool editing, nice gun

[JackyQuacky27]

Your dog is like " WHAT THE FUCK?!?" lol love the 226

[genneser1]

lol thats my fave airsoft

[pietzeekoe]

is it full metal?

[SteamFox]

No.

[militaria68]

impec' la vidéo !

[psychowigga]

oh very nice! im getting an acm copy of this!=]

[deusredeemer]

not a fan of sigs ....glocks hk usp styer m40sss b m92f are my favesssssss....

[mynameisray]

If that is a pellet gun it should have an orange ring around the tip of the barrel. I hope the cops catch you with it and taze the shit out of your face.

[SteamFox]

Good day to you too.

[deusredeemer]

im sure that i speak 4 everyone here......GO FISHHHHHHHHHHHHH BOY......

[nickynwong]

that only applies to America...

Other countries dont have that law.

[wtfasiankid8o8]

Hey, IDK about your sig dude, but my sig, when i load gas into it, i get that same slight leaking gas noise when i load the gas in, it doesn't sound completely silent like my friend's glock. Do you think, all in all, that this prob. is relative among all the TM sigs? Please, send your feedback on what you think. Cheers!

[Mustang1204]

No thats not normal. Control the O-Ring of the valve, and, if you need to, replace it.

[SteamFox]

Actually, it depends if it's normal or not. Where I live, almost all valves are NOT silent. It has something to do with valve standards I think (they are not a complete match). Have you tried to use your friends gas can to your gun? Does it still produce the same noise?

[wtfasiankid8o8]

Yes X(... So I took in the magazine, and the shop checked the valves and said it was OKAY, so I guess it should be fine. Thanks man.

[ScarletSnake]

-I like the Colt.

-Colt's mine baby.

[alkayda101]

love ur vids man..keep it up.

[bajsman]

You gotta make more videos like this.

[SteamFox]

Sure - just send me the weaponry you want the video to be made of :)

[bajsman]

If you happen to have a TM M9 Tactical Master, then I would love a video on it. Thing is, I can't decide witch weapon I should get, Tactical Master or the p226.

Anyway, if you can't make a video on that then any weapon would be great.

[AssaultRiflePlayer]

wats the fps?

[vaninlapoop]

I have the real steal version and yes it does have a safty.

[SteamFox]

"Automatic Firing Pin Lock - When at battery with a bullet in the chamber or empty, the firing pin is blocked automatically in either the cocked or de-cocked position. This helps in the event that the pistol is jarred or dropped. No manual safeties are present --"

I don't claim to know anything of the real steel, but this is what the web says.

[TheFrontLine123]

ight thanks.

[jfkenedykr]

what the dog// haha

[TheFrontLine123]

i got this gun yesterday. and the loading is suckish. how do you load it from the bottom?

[SteamFox]

Just push the spring all the way down; there'll be enough room to get BB's in.

[qazzaq11]

i might be gettin this gun, but on question: how much gas does this gun take? like every clip does it run out?

[Klajnepojken]

On a warm day you can shoot 2 loads of bbs on 1 charge.

And it's magazine, not clip. There's a diffrence, google it.

[qazzaq11]

Thanks, but one more question, on a cold day, like winter, how much?

[MrRee89]

dude one of the best gbb vids ive seen tho im a 1911 fan, needa get me profile set up bt good work!

[tk10]

Paljonkos maksoit tuosta? Mä olen hommaamassa KJW täysmetallia p226:sta. se maksaa 139 pro airsoftissa. Toi ei ole metallia, oletan. Oletanko väärin?

[SteamFox]

Taisi olla 120 euroa tarjouksessa. Kattelin parin kaupan hinnat ja näyttää edelleen 140 euron paikkeilla. Oli muuten hyvä tarjous :)

Ei ole metallia.

[NE1LR0X]

nice vid man, gd to see someone right close to the pistol wen shot. gd effects aswell. dog was the best though XD

[MindFreak131]

where did you buy it?? nice vid btw the editing was kool and stuff....

[sjzafrani]

wow, that video is really well made, may i ask which program you used to edit? and did you just have a cameraman holding the camera, or some special equipment?

[SteamFox]

Thanks. I used Adobe Premiere and didn't have any special equipment (on newer videos I use Final Cut and LiveType). Everything you see here can actually be made on just about any editing software so feel free to choose :)

[skwigz21]

lol the dog was the best part

[notalkingnow]

i really like your answer there, SteamFox...very diplomatic and so mature.

diplomacy aside, i found many problems with the KJW P226 and went with Marui and upgraded it with a Pro Win steel frame n slide.

problems found so far:

- knocker too weak, so it breaks if you change the hammer spring

- hop up trips out too much, you must adjust after every 2-3 games whereas the Marui don't need readjustments as much

- the mags don't last very long, seal is bad and the gas input nozzle chips easily.

[iLLbEfootWorkiN]

That gun isnt half bad.. I have a P228 though.

nice vid.

[jonsairsoft]

tanaka?

[mistabluntz]

great video, nice editing and such.

[buggy69]

mitä helskutin kaasua sä tossa videossa käytät kenties Green Gasia?

[SteamFox]

En, vaan PCB-Airsoftin myymää sitä tavallista kaasua.

[JV3r8]

good lord, keep that blaze orange tip on there so I don't shoot you with my real P226. Don't be that loser who ruins everyone else's fun after you die just because you thought it looked cooler. That metal frame is enough to make me believe it is the P226 weapon system.

[SteamFox]

Thank you for your concern. Few points:

If you shoot me with your real P226, it is either

a) I have misused my gun or

b) you have misused your gun

-There is no metal frame in this gun.

-Orange tips are only added to the guns in US.

Brandishing anything that looks like a weapon in public is illegal. More important than having safety measures (for loosers) which can be removed (by loosers), in my opinion, is to learn to be responsible. Then you won't need the orange tip anyway.

[morgan191]

that is a most excellent reply

[kx85isweet]

why do u manuel load do u know how much longer that is

[SteamFox]

You just couldn't read the message below?

[asimsinthehouse]

XD that was a hilrious reply

[trymsb]

Why the fuck do you mean that it's better to put the bb's in manually? It's much faster to do it with a speedloader! Do it if you accept to waste a looong time loading the magazine manually, in stead of automaticly with a speedloader.

But the gun is nice, and the vid. arn't that bad eighter.

[SteamFox]

Have a read at the description. The "feeding lips" or whatever are really stiff in this gun, so loading bb's with speedloader could hurt them. Of course it takes longer, and it's mainly for off-game loading. You're not really supposed to load mags in battle anyway. But yeah, nowadays I load them with speedloader from bottom.

[nuok123]

can a tokyo marui p226 fire a 6mm aluminum bbs without damaging the gun?

[angrypanties]

awesome editing

[copkilla45]

i need one

hey and what was that dog doing?

that was kinda creepy

the video ends with a dog...

...strange....

[Icachowda]

great video editing... and i lol'd at the dog

[mathus94]

and, if your in a pistol war, and you want like a 5 mag fill, how much would that be?

[airsoft3003]

You really will never get 5 mags worth of gas on one fill with a blow back pistol.

[mathus94]

how do you know how much gas to put in it

[SteamFox]

Good question. When the mag is empty, its easy - 2-3 sec fill is enough for one mag. When you refill it and dont know how much gas was left, you just have to estimate I guess.. There should be pressure meter in the mag or something.

[Radioaktive88]

ohh yeah and  Cool Filmed!!

[Radioaktive88]

Cool Gun i'm gonna have it :D

[ANGELjimenezPASCUA]

how much is this gun?????were can i buy this gun i meen in a safe website

[Screwlubes]

Tokyo marui is the highest quality you can buy. Every company copies tokyo marui airsoft weapons.

Also if you drop a full metal gun, you probably broke it. You can drop an ABS tokyo marui, it will most likely be fine.

Never knock an ABS marui!!

[Zebster47]

But you can buy a Metal Kit from WGC/Redwolf or some other retailer

[JubaTheBaghdadSniper]

is that the P226 full metal?

[SteamFox]

No. I don't think Marui makes metal versions..

[clarkeson203]

the p226 is a good solid gun, i just got a chrome verson today, havnt put it down since :D

[dalzilla]

Good Job.

what's the FPS?

[SteamFox]

I don't own a chronometer.. Try google: marui p226 fps

[dalzilla]

will do, I have real 226 and a KWC 226, Yours is a LOT nicer than mine & I have about 300 fps with 11G. pellets. So I'd guess yours is higher.

[ogdencur000]

i dont get the point of marui guns. they are plastic, overpriced, and under powered. anything stronger than 134a will wear it down. i have the kjw version and it is a real gbb. my friend has the marui version and the one time i shot it i had to be carefull because i thought i was gonna break the damn thing. so flimsy.

[SteamFox]

Well lets just say that many people would disagree with you. In terms of reliability and quality standards, Marui has always had an edge. Also, being plastic doesn't mean it has to be flimsy/break easily.

[ochimusha90]

there is safety

push the takedown lever from other side to lock the triger.(every marui automatic gun have safety)

this gun is nice. i just bought it today!

Tokyo Marui never betray my expection

[WestHoodX]

have u bought any guns from airsplat. com??

[qwewwwwwwrtyuiop]

the trigger action looked single not double.. isnt the marui double action?

[SteamFox]

Yes, it is double action. You can actually see that on 1:24 ;)

Actually, after reading wikipedia, the accurate term would be "Double action/Single action (DA/SA)".

[qwewwwwwwrtyuiop]

Thanks

Would you recommend this pistol as a first airsoft?

I have already got a Crosman and that broke so I'm looking into a Marui... It's down to the MP5A5 or the P226. The only real difficulty is that I'm buying in Canada and the prices are quite prohibitive to beginners.

[SteamFox]

So you're choosing between AEG and GBB? If you're going to play anything else than CQB, then having AEG is probably a must. But if you're like me and like to play CQB more, then I'd guess that a pistol is a good first weapon. Many people and reviews have said that the P226 is very reliable and accurate and definitely worth money. I'd guess reliability to be important for a beginner and also for your money ;)

So yes, I would recommend it.

[qwewwwwwwrtyuiop]

thanks

[brandon1617]

i just got it and should i use hfc 22 or hfc 134a? this is urgent answer in a timely fashion lol

[SteamFox]

hfc22=green gas? If so, then that will wear down the gun faster than using hfc134a. I personally use 134a.

[brandon1617]

k thank you

[corruptcrew]

really good sidearm

[gunnerofaht]

i want also want to buy a 226

but i don't like the plastic sound of it.

[sairus002]

You can buy full metal frame and slide set for $109 at evike. com black or chrome

[JTZ45]

Impressive camera work. Nice gun....

[landsper101]

I also own a 226. On mine, the safety engages when you push the reciver back a little.

[AirsoftingCARNOCHAN]

looks like a great gun, might get one!!! cool vid, 4/5 as their was no music, still great vid, the camera angles were awsome, like in a movie!!!:D

[kurikobun]

NICE GUN...AND DOG!!!!!!

[andyyaukm]

nice nice is it full metal? i couldnt find that model around shopts at my place....

[zero467]

whats the point of the white dots on the sights?

[SteamFox]

Makes the sights more easy/fast to use.

[rusTORK]

Awesome vid! Really!

[JordanbeterdenLebron]

nice gun!!!!loving the video editing how u fast forward it a little with the parts u dont like

[kkkekkkoa]

lovin the camera angles

[Stagideus]

A few points about the TM p226 gbb: There really is NO safety on the gun. The decock-lever only decocks the gun. In addition, the magazine is supposed to be loaded from the bottom, where there is enough space for a bb to be inserted into the bb ramp.

[SteamFox]

TM P226 GBB has a safety. Many people just don't know it's there, keep searching if you really want to use it ;)

You can't load the magazine from the bottom, at least I can't. Where did you get your information?

[Stagideus]

I got my information from the TM p226 gbb I have :). You were right about the safety, I was doing a video response and before posting, read through the comments again and spotted the info about the safety.. Boy do I feel embarrassed :D But the magazine IS supposed to be loaded from the bottom of the bb ramp. In order to do so, you pull the bb guide all the way down and insert bbs into the bb ramp through the opening in the bb ramp.

[SteamFox]

Interesting.. I'll have to check my magazine one more time and if I can't load it from the bottom I'll make a video so you can see why. But considering you have the same gun, I've probably just missed something :P

[SteamFox]

It can be loaded from the bottom indeed :D

I just never realized it because the spring is quite stif and I never pulled it all the way down, duh.. Thanks :p

[Bhouse93]

actually there is a safety.. the decocker... if u pull that all the way down it will stay down and u wont be able to shoot it

[Corvid]

Just like the real gun, it is double action. If you pull down said lever, you will still be able to fire the gun. However, it will have a slightly harder trigger pull. While this does make the gun more safe to handle, it does not prevent you pulling the trigger, so is not a safety as such.

[Bhouse93]

on the gun, if you pull down the decocker all the way, it will stay there and it wont shoot

[Corvid]

On the airsoft version (and I believe also the real thing), when you pull down the de-cocker, the hammer goes to the "half-cocked" position. From here it takes a hard and slightly longer trigger pull to fire the gun. That is a FACT with the airsoft version, and I would assume the same is true of the real thing. When the hammer is all the way down on the airsoft version, you can STILL fire the gun, but it takes a long hard trigger pull to do so.

[Bhouse93]

on the real guns, yes but if you pull down the decocker all the way, it will click and its on safety, but the real sig doesnt do this

[Corvid]

Sounds like you've got a defective gun then: the airsoft version's safety is only able to be engaged manually. It does NOT engage when the decocker lever is pushed down. As I said, once the decocking level has been pushed down, the trigger can be pulled in double action mode. This is exactly as the real thing as far as I am aware. Do you even own a TM Sig 226?

[Bhouse93]

no, but i used one before, and a real p229. If you pull the decocker down on the real gun, as you said it goes down half way and then all the way after you bring it up. On the airsoft version, if you pull it down, the hammer comes down in one motion, and if you pull it down all the way it will click and you have to push it to bring it up.

[John234pwns]

Nice! Good video. I prefer the TM1911, but the SIG is my second favorite handgun,(If the 1911 wasn't .45 ACP I'd probably carry a sig :)

[Motionpr]

See if I bought any gun with blow back dose it mean it will slide the top half of the gun back and forth and reload it?

[SteamFox]

Yes. The blowback sets the hammer back and loads the next round. If you buy a non-blowback pistol, the hammer is armed the same time you push the trigger, thus making it longer and a bit tougher operation. But you should google it, I'm not good explaining this in english :)

[John234pwns]

The blowback models are usually higher quality because the slide cyling puts more stress on the internals. Non-Blowback CAN be effective (greater power potential and no recoil, also less exposed internals and simpler operating)But because of the lower quality, they are usually weaker and flimsier.

[MickThompson123]

whats its fps?

[MrBlanks]

Whats wrong with using the speedloader? Sure you get some gaps here in there if you don't hold it in the right angle slowly, but it sure beats 1 bb at a time.

[SteamFox]

Because this magazine is quite stiff (the hole where you put the BB's in, whatever its called in english), using the speedloader is not very easy and might damage the magazine and/or the BB's. I guess you _could_ use the speedloader, but I prefer loading it manually.

[MrBlanks]

thats why you have to hold the spring down. I would show you how but I dont have a camera. Nice gun though, had mine for a year and it is awesome.

[SteamFox]

I know how to use a speedloader (yeah, the video is bad because it doesn't show the spring being pulled down), it's just that compared to other magazines (especially HFC M190 which I have) this one is lot more difficult to use with speedloader. But as said, it is not impossible. Personal preference I guess.

[mrmanthepianist]

how much dose that gun retail at i live in the uk

[Corvid]

Around £100.

[FOXHOUNDXBL360]

lovely video good camera angles thumbs up :D

[hikaru555]

now I know I want one :) cool vid dude.

[merustproof289]

how did you get the paint of of the gun so well

[SteamFox]

If you're talking about the red tip, this didn't have one in the first place.

[viper2681]

I never read video descriptions because you're actually the first person I've seen to actually fill that damn thing out. Kudos to you for doing so.

[viper2681]

Hey SteamFox, you may wanna note that there is a safety. On the right side of the gun (opposite of the side with the mag release), you push the disassembly switch to the left so that it sticks out. That's your safety.

[SteamFox]

I suppose you didn't read the video description? At least to my knowledge the real steel doesn't have this safety and it's only there because the japanese law requires it. That's why it is kinda 'hidden' in the airsoft version. But if I'm mistaken, just let me now and I'll change it :)

[SteamFox]

Thanks, thanks and thanks :p

[gummel82]

cool video... well done

[HolySmokeZ]

cute dog, lol

[depthcharge83]

a nice and simple video...great job!