So, apart from the demo, did you use the saw in 'real world' conditions? If so, are you satisfied so far? I'm about to buy either a new 346XP or a used MS341 (same as 361). Up here in Canada, the 346XP is priced at 689$CDN (approx. 650$US) and I could get a still decent MS 341 for 375$CDN. So your input would be greatly appreciated. Thanks!
Sorry man that must be some really tough wood if that is the same saw you brought to the GTG. Because that thing really ripped. Was this video done before the saw was ported or after?
ok i know they are 3.5hp and the new husky is 3.7 but about vibrations you are wrong....stihl is better made saw and less vibrations than husky... i know i selling saws(husqvarna,stihl and jonsered)and stihl rox remember that
stihl is overpriced cr@p. if you think the 260 vibes less than a husky you dont know anything about saws. the 361 is the most overpriced saw in the US.
ok ok now stop! you can't say nothing bad about 361....first 357xp more vibrations,outside clutch....the 361 is the gold medalist on logger's world championchip for 4-5hp category.if this is not enough i can say something about husqvarna bar and chain's.....bad bar's very bad bars. sory but this is the hole truth. i live with chainsaws all of my life...sory for my bad english
husqvarna 455 is powerful cut through a 38 in oak in 8 min p.s. watch the video on the 455 done by the same person above husky is stronger a tre fell on someones husky 455 the handle bar was bent a little but no damage my uncle did it with a stihlbusted all to hell husky is superior to stihl a stihl sucks balls!!
pity hes using it like a bushman(handsaw),YOU LET THE SAW DO THE WORK NOT THE PERSON
zaskarelite 1 year ago
So, apart from the demo, did you use the saw in 'real world' conditions? If so, are you satisfied so far? I'm about to buy either a new 346XP or a used MS341 (same as 361). Up here in Canada, the 346XP is priced at 689$CDN (approx. 650$US) and I could get a still decent MS 341 for 375$CDN. So your input would be greatly appreciated. Thanks!
mmodnao 2 years ago
cant say much about the 341 cuz i dont know about it. the 361 is a morepowerfull 60cc saw and the husky 346xp is 50cc.
both good saws. the husky is lighter and less tiring if thats something you need.
i have cut a mess of wood with both saws and they work.
iwantastihl 2 years ago
Got my new 346xp today and I like it a lot! Thanks for the advice.
mmodnao 2 years ago
I hope you warmed the saw up a bit before you cut like that.......
bernithebiker 2 years ago
i try to warm my saws a bit before heavy cutting. some just fire em' up' and burn em' down!
:)
it was a bit cool @ the beging of the cut, then it warmed a bit and cleaned out.
iwantastihl 2 years ago
It's fun to watch people running the guts out of little toy saws! HA HA HE HE!
timberfeller6 2 years ago
Ive have a 346xp it's best with a 13" bar VERY fast
RJM1011 2 years ago
Duh just looked at the title.
jtigertic 2 years ago 3
Sorry man that must be some really tough wood if that is the same saw you brought to the GTG. Because that thing really ripped. Was this video done before the saw was ported or after?
jtigertic 2 years ago
Glad to see your wearing chaps saw sounds a touch rich and the chain either needs sharpening or the rakers need adjusted nice saw though.
jtigertic 3 years ago
chain was NIB so no sharp'n needed. LGX is very aggressive.
the wood is very tough.
iwantastihl 3 years ago
did u see the preditor cut an 30 inch log?
hootergirlsrhot 3 years ago
get a 254xp... they r the saw.. an stihl r a loada crap.. they onli make a gud saw for in the tree!!!
davygillespie91 3 years ago
buy yourself a stihl ms260
PERPARSON 3 years ago 3
overpriced and under powered. why dont you buy yourself one. they vibrate too much also.
iwantastihl 3 years ago
ok i know they are 3.5hp and the new husky is 3.7 but about vibrations you are wrong....stihl is better made saw and less vibrations than husky... i know i selling saws(husqvarna,stihl and jonsered)and stihl rox remember that
PERPARSON 3 years ago
stihl is overpriced cr@p. if you think the 260 vibes less than a husky you dont know anything about saws. the 361 is the most overpriced saw in the US.
iwantastihl 3 years ago
ok ok now stop! you can't say nothing bad about 361....first 357xp more vibrations,outside clutch....the 361 is the gold medalist on logger's world championchip for 4-5hp category.if this is not enough i can say something about husqvarna bar and chain's.....bad bar's very bad bars. sory but this is the hole truth. i live with chainsaws all of my life...sory for my bad english
PERPARSON 3 years ago
bad bar, bad.
LMAO!
iwantastihl 3 years ago
yea i want to see how do you write slovenian!
PERPARSON 3 years ago
i was not making fun of your english as mine is no better and i lived here all my life. :(
husky bar and chain here are made by oregon, decent stuff.
iwantastihl 3 years ago
why does the 455 cut faster than the 346xp?
kalob35 3 years ago
i just bought the 346xp...it is quite a bit faster than my buddies 455
agrantham45 3 years ago 5
LMAO!
your buddy either doesnt know how to run a saw or needs a new chain because the 455 kills the 346 in bigger wood.
iwantastihl 3 years ago
stihl is not durable husky is husky is better than stihl!
kalob35 3 years ago
i agree over $600.00 dollars in n.c.
kalob35 3 years ago
a 361 price $600.00
kalob35 3 years ago
361 is 600dollars wooow in slovenia 361 cost 852euro this is about 950 dollars
PERPARSON 3 years ago
260 is slow get a husky 455,365,570,460 strong saws
kalob35 3 years ago
oh please you must be dumb to say 455is a strong saw....a fucking hoby saw....the one and only good saw from husqvarna is 372xp.....but still rulz!
PERPARSON 3 years ago
husqvarna 455 is powerful cut through a 38 in oak in 8 min p.s. watch the video on the 455 done by the same person above husky is stronger a tre fell on someones husky 455 the handle bar was bent a little but no damage my uncle did it with a stihlbusted all to hell husky is superior to stihl a stihl sucks balls!!
kalob35 3 years ago