hey man i just bought a shockwave and im gonna be runnning it in the dirt and stuff but how can i make its so water doesent get in the engine because in one of the other comments i saw you can get the whole car wet. thanks
very good video as i go out with my car i always think of how dirty its gonna get and watch this near every time after i have been out to get some ideas of how to wash it. Thanks Ali :)
what i do(and i think it's more effective) is take the engine, difs, planetarygears, and shocks off, take the chassis and dip it into water with soap and nothing more.
whenever you are washing your wheels, i would cover the holes with tape or something like that so no water gets in the tire and adds weight and unbalances the wheel.....
break parts cleaner and air compressor to clean dirt off then use WD-40 to make parts look like they were new. PS: to other people watching this video DO NOT EVER take your air filter off while your cleaning it wait till after and do it then. one little speck of dust gets in the engine and its ruined
I was wondering, if you leave your truck or car dusty, can it rust parts? I have an electric traxxas ERevo and I made a front yard oval track and it gets all dusty...
@alishanmao i have bought the same truck for my first!!!! I made a very bad mistake leaving the igniter in the engine and it took off, flipped and landed on it.... the igniter is wrecked and when it is off and i move the truck forward or back it makes a "k k k" sound i think it is the gear that makes the wheels move... what is that called and please confirm if it is the right part. when i got it, it would turn on but when i accelerate it would go a little and then turn off after 2 secondsPM ME
@salumlum Hey i have revo 3.3 and i got that wierd kkk nosie. turns out i a little rock stuck up under my gear and stripped the gear out. that might be a problem.
@sauer200str1 IF YOU WANT TO BUY AN RC CAR ESPECIALLY HSP BE PREPARED TO SPEND 50% OR MORE OF YOUR TIME FIXING SOMETHING ON IT AND ORDERING PARTS NON-STOP!
DONT WORRY ABOUT THE PRICE OF THE CAR BECAUSE THE REPAIRS ARE WHERE YOU SPEND THE BIG MONEY, I WAS VERY SURPRISED AT HOW BAD QUALITY ALL MY HSP BUGGIES AND TRUGGIES WERE, ALL 4 OF THEM HAD SOMETHING BREAK OR COME OFF WITHIN THE FIRST 20 MINS, I USED 4 CARS FOR A TOTAL OF 45MINS B4 THEY WERE ALL SITTING THERE WAITING FOR ORDERED PARTS. TRUE!
Hi ali, i have a question about my infinitive rc truck. Its right dogbone axle is ok when i turn but the right one slips out of the socket. What do u think the problem is? I have no idea and i really need your help on this one.
@kasey24ful seems like that side upper connecting rod has moved the C hub connection away that keeps the distance between wheel drive cup and front gear drive cup enough to hold dog bone in. See if you can tighten the screws or anything provided to get that distance set to shorter.
@alishanmao thank you for your help and it seems like i cant get the distance shorter no matter what screws i tighten so i ordered some longer dog bone axles to make that distance shorter.
he ali, what is the difference between hsp and redcat racing??....i have an hsp rally monster and it is just the same like the vortex the only difference is that the body says redcat and hsp doesnt
Hi alishanmao, I had bought a Firestorm 10T from HPI, evrythhings is ok and simple to clean exept one thing, I dont know why, but my exhaust heading had a leak, some fuel or oil like are always flown from it, can you help me, because it's really hard to clean after go in dust, because it make a crust like
@TheRockisSmokin crap i put some intomy carburator on a vx18 engine for a redcat vortex ss and now the engine is acting weird and if i take the glow plug ignitor it turns off and it heats up alot....it didnt use to do that before i put the wd-40....PLEASE HELP
@wapa445 so if u have the glow pluge ignitor the car doesn't drive away? and when u take the glow pluge ignitor it drives away? i dont think the oil did that to the car. u look up how to tune rccars on youtube. i just own 1 rc car so im not expert
The best way I have found to clean a R/C car is to spray it down with rubbing alcohol & then hit it with some compressed air. It leaves it spotless & it won't hurt the electronics. You should never take the air cleaner off while cleaning it as crap can get into the carb.
its so much eaiser using a air compressor spary metholated sprits or soapy water all ovr your buggy and blow dry it with a air compressor and make asure u dry the electrics it takes about 5 mins including pressureing the comprerssor lol XD
my dad told me with a lawn mower, air filter leave it in fuel for 5 mins then it comes out good as new, would this work for RC car? im thinking of getting 1
no after u run ur car put oil in the carburter 3,5 drops and open the throttle and crank it 4,5 times and then put it away dont start it just crank it
No I dont start it when oiling I just take the remaining fuel out of the engine when I take the tank off, before I go put oil in it and I cant put oil in my carb my air filter is strapped down its a savage xl
hey, im thinking of getting my first rc car, im looking on ebay, and im a little confused, nitro cars, do they just run on regular gas? or is it like certain gas (nitro)? if so where is it sold. But i was more looking at the electrics since it is gunna be my first, and the one im looking at comes complete with battery, transmitter, radio and all RTR from $90-$130. What should i be looking for. And the biggest question truck or car?
Not going to happen glow igniters alone are like 20 bucks 30 bucks a gallon of fuel, and the car can run anywhere from 200 and up, keep dreaming this is an expensive hobby but worth it, only try if you are willing to dedicate the time and money
Electric are best for beginners my man. and comparatively cheap to run and maintain than nitro cars. Now whether to get truck or buggy, its all your choice my man. If you like off roading, go for trucks, if you like off road speed and jumps, go for buggies
it runs on nitro its sold a t ur local hobby shop if u want for 90 to 130 ur cetainly not getting no nniro the cheapest is nitrorcx but dont buy there there rcs are horrible in durability so ya 400 dllars is what ur looking at and i would go truck for offroad and car for on road if u got questions just visit my channel and comment on my video
TIP TIME :P: dont use wd40. from personal experience i have realised that wd40 eats away rubber.. i now use after run oil. there are rubber sealed bearings in the engine so wd40 eats the rubber= bad. if you want to use something else instead of after run oil. then use a product called gt85.
sorry for taking a while but no I have done tht to my e-maxx and it still works great but when it gets water in the tire and you go very fast the car might start shake and that is not good the only thing you have to do then is to press the tire so water gets out.
Are you sure you can use tide to clean the airfilter or nitro fuel is better to clean the filter and did u put any airfilter oil or ist ok without the oil?just curious.....
Against all better judgment, I spray my buggy's off with a hose and a pressure end on it. I remove the engine and receiver before I do so, I rarley drive in dirt, Alot of street where I live :D.
nice. Well I once washed a truck with water hose without taking engine or electronics off lol nothing went wrong. just dried electronics later with hair dryer n all was good
I have used tap water to wash the engine. just make sure you seal the carb right and don't let any water go inside the engine. also make sure water doesn't get to electronics :D
Check if wheels are fixed properly n are tightened well. If they are, then probably the wheel axle is bent. get new axles or straightened the old ones out.
Hey man just a question with washing could u take the engine out and stuff and the receiver and all the servos and just get a hose and wash it, because people said u could just do that.
yes you could. But best way is, spray WD40 All over everything. then goto a tire shop. or find an air compressor. just blow everything off then :D neat n quick.
Can you tell me what car you like most or is your favourite from redcatracing. Maybe i gonna buy some 1 to from there. Tey are very cheap. I have already 1 but these are might a bt better. Also helpfull vid. I learn much from you:) Thanks!
Landslide, till now. But hey wait, Hurrican XP and monsoon XTR Will be here soon. so Can't say yet. Cuz Hurrican XP is professional buggy :D till now, Landslide :)
Hi Ali, i was wondering if i could use any thing to use as air filter oil, apart from the actually air filter oil stuff that you can get in shops, i was wondering if there was anything you can use at home maybe?
hi its me again..sorry if the question i ask has been answered(i couldn't read 131 comments :P)so pls ali tel me if the metod for washing i use is correct:i take weels out then spray the truck whit foam(from the carwash)+water,i leave it 5 minutes to disolve all the dirt and grease then i shower it nice(all the truck) then dry it whit hair dryer...if u remember i asked u the question about the electronics into the water(and u sad its not big problem)ps what about the water in tiers is it bad?
hey mate, I wash the tires by water too. But I found some rusting appearing due to using water on different metal parts. So now I just spray WD40 or other cleaner on car, Wash away the spray after 2 minutes using water making sure it doesn't get to battery compartment. Then I clean it with cloth n spray WD40 all over. beats rusting :) Cheers Just make sure you spray rust beating thing after wash.
yes you can. Later you will have to prime the engine well and it will start. However some people found it difficult to start after they used WD40 inside engine. I'd say to be on safe side, before starting after you have sprayed WD40 inside carb n piston area, take out the glow plug, put nitro in carb directly, n onto the piston, pull the starter to unflood the engine and then, put the glow plug back in. It will start easy. no worries
"n do not for get to clean up after cleaning your rc nitro car or truck. do not leave this part to your wife or girlfriend. you can get into trouble."
but this is very good:
"Do not forget after cleaning your nitro RC car or truck to clean the bathroom. to this part (cleanliness) of your wife or girlfriend can be in trouble."
Hey, compressed air or air compressor is the best choice to do it safe and easy. Don't remove the air filter. spray WD40 or similar liquid all over the body, then just blow everything away using air compressor. Car will be like new again. Later when dirt is cleaned, you can take out the air filter and wash it. dry it, apply airfilter oil n you are done :)
nooooooooo, don't ever put the petrol in a Nitro Engine :D. If you want to run on petrol, you can buy a 1/5 scale gasoline engine 26cc truck :) those things are awesome :D
Its the fuel for Nitro Engines :) heheh. Nitro Methane mixed with lubricant oil with 15% to 30% rate. The only fuel that nitro engine can run on. Don't ever use petrol in nitro engine :D
that was a awesome video. how do you add air filter oil?
music133866 3 weeks ago
hey man i just bought a shockwave and im gonna be runnning it in the dirt and stuff but how can i make its so water doesent get in the engine because in one of the other comments i saw you can get the whole car wet. thanks
spikeysux 4 months ago
i use the hose pipe lol :D
cliffybean 5 months ago
THE FRONT TIRES ARE ON THE WRONG SIDE! THE GRIP IS FACING BACKWARDS AND YOUR TREAD WILL WEAR/BREAK AFTER TIME.
VirusOfCyrus 6 months ago
very good video as i go out with my car i always think of how dirty its gonna get and watch this near every time after i have been out to get some ideas of how to wash it. Thanks Ali :)
frazzer1994 8 months ago
could i use wd-40 to clean some parts of the car?
nti7 8 months ago
any1 use electrical cleaner? evaps quick and leaves no resin? has any1 tried it?
guccamain 9 months ago
you forget to use air filter oil its an important part that holds out dust/dirt and things like that out better! its a must
emil068f 10 months ago
is it ok to use wd-40 or the engine ?
darkwolvesmusic 10 months ago
what about compresser
thekandg33 11 months ago
what i do(and i think it's more effective) is take the engine, difs, planetarygears, and shocks off, take the chassis and dip it into water with soap and nothing more.
the rest with gas oil and patience.
cheers
metalero19882 11 months ago
Thx for your Experience.
DoMM2401 1 year ago
cool thanks man!
The2littlebastards 1 year ago
@alishanmao
if you want to wash the whole car, can you just remove the servos and reciever cause i guess that the engine can get wet on the outside.
and can you wash the brakes?
MAUEN88 1 year ago
@MAUEN88 yes you can, just make sure, water doesn't get inside the engine.
alishanmao 1 year ago
@alishanmao
thank you!
MAUEN88 1 year ago
whenever you are washing your wheels, i would cover the holes with tape or something like that so no water gets in the tire and adds weight and unbalances the wheel.....
Previous1Next2 1 year ago
@Previous1Next2 ya thats what i do. it might dry out if u let it set but i go ahead and use tape
TheHondakid98 1 year ago
that was very helpful thanks
fitzgeraldsfire 1 year ago 2
break parts cleaner and air compressor to clean dirt off then use WD-40 to make parts look like they were new. PS: to other people watching this video DO NOT EVER take your air filter off while your cleaning it wait till after and do it then. one little speck of dust gets in the engine and its ruined
ELITEFLEET03 1 year ago
do u just spray the endgen with wd40 all over ?
tigger00025 1 year ago
Another way is to use something like mineral turpentine in a spray bottle. Remove the electonics first though.
lahbl 1 year ago
I was wondering, if you leave your truck or car dusty, can it rust parts? I have an electric traxxas ERevo and I made a front yard oval track and it gets all dusty...
TheChris1696 1 year ago
@TheChris1696 dusty is ok but love your cars and keep them clean
alishanmao 1 year ago
@alishanmao Yeah, but I don't want to clean all in the motor and wheels when I'm going back in the dust :)
TheChris1696 1 year ago
@alishanmao
how do you apply air filter oil?
music133866 3 weeks ago
just soak it down with denatured alcohol and use strong compressed air to remove dirt and denatured rubbing alcohol
pbkid201 1 year ago
hello ali!! i love your videos!! is Hsp Tyrannosaurus Ready To Run and is the car good quality??
sauer200str1 1 year ago
@sauer200str1 it was my first ever nitro truck and I still have it. it runs well :D after these many years
alishanmao 1 year ago
@alishanmao i have bought the same truck for my first!!!! I made a very bad mistake leaving the igniter in the engine and it took off, flipped and landed on it.... the igniter is wrecked and when it is off and i move the truck forward or back it makes a "k k k" sound i think it is the gear that makes the wheels move... what is that called and please confirm if it is the right part. when i got it, it would turn on but when i accelerate it would go a little and then turn off after 2 secondsPM ME
salumlum 1 year ago
@salumlum Hey i have revo 3.3 and i got that wierd kkk nosie. turns out i a little rock stuck up under my gear and stripped the gear out. that might be a problem.
bradyvice33 1 year ago
@sauer200str1 IF YOU WANT TO BUY AN RC CAR ESPECIALLY HSP BE PREPARED TO SPEND 50% OR MORE OF YOUR TIME FIXING SOMETHING ON IT AND ORDERING PARTS NON-STOP!
DONT WORRY ABOUT THE PRICE OF THE CAR BECAUSE THE REPAIRS ARE WHERE YOU SPEND THE BIG MONEY, I WAS VERY SURPRISED AT HOW BAD QUALITY ALL MY HSP BUGGIES AND TRUGGIES WERE, ALL 4 OF THEM HAD SOMETHING BREAK OR COME OFF WITHIN THE FIRST 20 MINS, I USED 4 CARS FOR A TOTAL OF 45MINS B4 THEY WERE ALL SITTING THERE WAITING FOR ORDERED PARTS. TRUE!
VirusOfCyrus 6 months ago
Hi ali, i have a question about my infinitive rc truck. Its right dogbone axle is ok when i turn but the right one slips out of the socket. What do u think the problem is? I have no idea and i really need your help on this one.
kasey24ful 1 year ago
@kasey24ful seems like that side upper connecting rod has moved the C hub connection away that keeps the distance between wheel drive cup and front gear drive cup enough to hold dog bone in. See if you can tighten the screws or anything provided to get that distance set to shorter.
alishanmao 1 year ago
@alishanmao thank you for your help and it seems like i cant get the distance shorter no matter what screws i tighten so i ordered some longer dog bone axles to make that distance shorter.
kasey24ful 1 year ago
thanks. this helped me loads :)
Trutchie 1 year ago
thanks for good way when you explain to me to clean my buggy
JeffHardyFan6334 1 year ago
shame you have to put the music in...Not everyone likes this stuff as music is personal. Could of been a good vid otherwise..Sorry..
loco6607 1 year ago
lol well I must be a millionaire because I can buy a new toothbrush lol just messing with ya ali great vids
rcboatdriver1234 1 year ago
he ali, what is the difference between hsp and redcat racing??....i have an hsp rally monster and it is just the same like the vortex the only difference is that the body says redcat and hsp doesnt
wapa445 1 year ago
Hi alishanmao, I had bought a Firestorm 10T from HPI, evrythhings is ok and simple to clean exept one thing, I dont know why, but my exhaust heading had a leak, some fuel or oil like are always flown from it, can you help me, because it's really hard to clean after go in dust, because it make a crust like
simoniaquoino 1 year ago
@simoniaquoino just put some sealant on it, and or see if you can tighten the exhaust. before that open it and see if seal or gasket there is broken.
alishanmao 1 year ago
u really are a big redcat fan aren't you? =]
MrSupra95 1 year ago
@MrSupra95 I am not a fan, I work for them. I am an official employee
alishanmao 1 year ago
@alishanmao my bad.. but you still do like redcat right?
MrSupra95 1 year ago
@MrSupra95 Yup mate. they are good priced and quality cars
alishanmao 1 year ago
I have a Hong nor Lx one.
Never prime it.
never clean it.
and never put any decent fuel in it (Allways out of date)
and it runs like a champ :)
Isaaclighty 1 year ago
could u acctually put wd-40 on carburator????...or i got that wrong???....
wapa445 1 year ago
@wapa445 u could put wd-40 in to ur carburator . if u get a new rc u put wd-40 or after run oil in to the carb. hope it helps
TheRockisSmokin 1 year ago
@TheRockisSmokin crap i put some intomy carburator on a vx18 engine for a redcat vortex ss and now the engine is acting weird and if i take the glow plug ignitor it turns off and it heats up alot....it didnt use to do that before i put the wd-40....PLEASE HELP
wapa445 1 year ago
@wapa445 so if u have the glow pluge ignitor the car doesn't drive away? and when u take the glow pluge ignitor it drives away? i dont think the oil did that to the car. u look up how to tune rccars on youtube. i just own 1 rc car so im not expert
TheRockisSmokin 1 year ago
@TheRockisSmokin ok thanks im like the same i only have one
wapa445 1 year ago
nice
schlitzdie 1 year ago
Is it that bad if it does rust a bit?
TheAwkwardBanana 1 year ago
i just take the battery out and spray mine down with a hose lol then wd-40 it around any moving parts
thatonehalfnigga 1 year ago
I just use Simple green and an Air compressor!!
DROPD5150 1 year ago
do rc car rust bad ?.
martinlarsen20 1 year ago
@martinlarsen20 mostly the metal parts including engine mounts and engine blocks can start rusting quick
alishanmao 1 year ago
nitro fuel dosent attract water it has water in the fuel
kidfromdidcot 1 year ago
in my nitro car i cant reach the small gaps under the engine got any tips?
magetrix 1 year ago
Do you always have to use emoticons in every slide / video?
Seems kinda gay because I've seen some of your other videos, and I am skeptical. Just saying.
ReturnScroll 1 year ago
Nice i clean my car so i take the motor out and elektrick an the chasi ounder whater :-) Sry i have a bad english
999boom777 2 years ago
The best way I have found to clean a R/C car is to spray it down with rubbing alcohol & then hit it with some compressed air. It leaves it spotless & it won't hurt the electronics. You should never take the air cleaner off while cleaning it as crap can get into the carb.
vegasfordguy 2 years ago
Where do you add the WD-40?
TheAwkwardBanana 2 years ago
just spray it :) over the dirty areas
alishanmao 2 years ago
what do you think about air compressor thats what i often use after bashing
BuggyRunner6 2 years ago
thats the best way
alishanmao 2 years ago
i use a air compressor !!
but the tip is good !
amiroman2 2 years ago
wats your favorite car?????
roger123100 2 years ago
where can i buy new shells for my one?
xKallum 2 years ago
@xKallum At any hobby shop.
lazylewbob 2 years ago
its so much eaiser using a air compressor spary metholated sprits or soapy water all ovr your buggy and blow dry it with a air compressor and make asure u dry the electrics it takes about 5 mins including pressureing the comprerssor lol XD
Tunerboii2045 2 years ago
I'd not wash the air filter, I would replace it
TheMalcolmx95 2 years ago
my dad told me with a lawn mower, air filter leave it in fuel for 5 mins then it comes out good as new, would this work for RC car? im thinking of getting 1
jaxzf 2 years ago
yes
lee1994ful 2 years ago
Odonnell Racing Speed Wash, a lil rinse, air and your done in 5 min!
30636086 2 years ago
I use an air compressor...
mgonzo700 2 years ago 9
@mgonzo700 aww i was goin to say that
300exkx8597cobrasvt 1 year ago
y don't u use an air compressor its faster and easier it get most dirt off then go in with a toothbrush and get the little part with it
smithawesson66 2 years ago
Thats a great looking car! :) can some you tell me how to get one of these awesome nitro cars!!
TELEVISION611 2 years ago
Go buy them off redcatracing com
alishanmao 2 years ago
is this write to take tank off cran and then take glow pug out and crank then put wd40 3 times crank eac time I have a savage xl
TeamTraxxas37614 2 years ago
what is that for?
alishanmao 2 years ago
to do after run on the engine
TeamTraxxas37614 2 years ago
hey ali I noticed that red cat car doesnt have a hole on the body for the engine to cool thats bad
TeamTraxxas37614 2 years ago
no after u run ur car put oil in the carburter 3,5 drops and open the throttle and crank it 4,5 times and then put it away dont start it just crank it
smithawesson66 2 years ago
No I dont start it when oiling I just take the remaining fuel out of the engine when I take the tank off, before I go put oil in it and I cant put oil in my carb my air filter is strapped down its a savage xl
TeamTraxxas37614 2 years ago
@TELEVISION611 or ebay put in remote control truck theres many of them at a great price
santerre1974 2 years ago
hey, im thinking of getting my first rc car, im looking on ebay, and im a little confused, nitro cars, do they just run on regular gas? or is it like certain gas (nitro)? if so where is it sold. But i was more looking at the electrics since it is gunna be my first, and the one im looking at comes complete with battery, transmitter, radio and all RTR from $90-$130. What should i be looking for. And the biggest question truck or car?
TheBigHurtIV 2 years ago
Not going to happen glow igniters alone are like 20 bucks 30 bucks a gallon of fuel, and the car can run anywhere from 200 and up, keep dreaming this is an expensive hobby but worth it, only try if you are willing to dedicate the time and money
DjAronNow 2 years ago
im talking about electric ..... i might get a nitro like later on but im talking about electric
TheBigHurtIV 2 years ago
Electric are best for beginners my man. and comparatively cheap to run and maintain than nitro cars. Now whether to get truck or buggy, its all your choice my man. If you like off roading, go for trucks, if you like off road speed and jumps, go for buggies
alishanmao 2 years ago
it runs on nitro its sold a t ur local hobby shop if u want for 90 to 130 ur cetainly not getting no nniro the cheapest is nitrorcx but dont buy there there rcs are horrible in durability so ya 400 dllars is what ur looking at and i would go truck for offroad and car for on road if u got questions just visit my channel and comment on my video
TeamTraxxas37614 2 years ago
Whats wrong with going to the local petrol station and blasting it with the airline?, after capping intake of course.
mitsucanter247365 2 years ago
Nothing :) just that in China they don't have it LOL
alishanmao 2 years ago
Serious? you cant drive your car to a petrol station and pump your tyres up?
mitsucanter247365 2 years ago
I build my RC car apart into separate parts.
Then I wash it with Dishwasher (not the machine! I mean the green/blue fluid) and a toothbrush.
Then I put it back together without a manual (which is pretty hard)!
OMG. I think the google translater is not so good like a people! uff...
RCPhilN 2 years ago
damn thats lots of work
alishanmao 2 years ago
thanks man
metalman383 2 years ago
thanks man
metalman383 2 years ago
TIP TIME :P: dont use wd40. from personal experience i have realised that wd40 eats away rubber.. i now use after run oil. there are rubber sealed bearings in the engine so wd40 eats the rubber= bad. if you want to use something else instead of after run oil. then use a product called gt85.
imy2k07 2 years ago
WD40 does not perish rubber
mitsucanter247365 2 years ago
keep using it and you will find it does...
imy2k07 2 years ago
AWSOME VIDEO!!!now i know some tricks by how 2 clean my revo3.3!!
ROCKOZON98 2 years ago
but wouldnt that break the tire wallinsky95
hein127 2 years ago
Comment removed
geproks 2 years ago
sorry for taking a while but no I have done tht to my e-maxx and it still works great but when it gets water in the tire and you go very fast the car might start shake and that is not good the only thing you have to do then is to press the tire so water gets out.
wallinsky95 2 years ago
to clean my nitro I use mega wash and compressed air works great :)
lightsaberdudes2 2 years ago
i forgot to do the last thing, i got into heaps of trouble oh em gee
12cu294xxx 2 years ago
your videos are the best and now I know everything there is to know. Thank you so much!!
Shayne
r2koooolmi 2 years ago
welcome. Spread the word please :D
alishanmao 2 years ago
hey ali i got the same truck and i find it hard to get the parts where do u get yours from ??
samthefireman14 2 years ago
I work for RedCat Racing. n I Get all parts from them :)
alishanmao 2 years ago
AHHHHHHA funny guy
Andrej333 2 years ago
So what happens if you use your wifes panties or shirt?
bambooman36 2 years ago
You get trouble at night. n you have to use your hands then
alishanmao 2 years ago
when you wash the tires doesnt water get in them???????
hein127 2 years ago
nops :) did not happen yet
alishanmao 2 years ago
k thanks
hein127 2 years ago
for your tires make like four holes or 2 so you can get the water out off the tire becuse i think it will come some water in it.
wallinsky95 2 years ago
k thanks
hein127 2 years ago
Are you sure you can use tide to clean the airfilter or nitro fuel is better to clean the filter and did u put any airfilter oil or ist ok without the oil?just curious.....
dotbadburn 2 years ago
I used washing powder to clean the air filter. all was good. yes I use air Filter oil.
alishanmao 2 years ago
so which one is better to clean the filter washing powder or nitro fuel?
dotbadburn 2 years ago
washing powder. make sure to dry the filters first before putting them on n apply airfilter oil
alishanmao 2 years ago
buy a new one is better. fixing is headache
alishanmao 2 years ago
yes you will total the engine if dust or sand gets to piston.
alishanmao 2 years ago
What about screws, bearings and differentials?
3wizion 2 years ago
well that would need a 4 hours operation then
alishanmao 2 years ago
Against all better judgment, I spray my buggy's off with a hose and a pressure end on it. I remove the engine and receiver before I do so, I rarley drive in dirt, Alot of street where I live :D.
whatUsaybob 2 years ago
nice. Well I once washed a truck with water hose without taking engine or electronics off lol nothing went wrong. just dried electronics later with hair dryer n all was good
alishanmao 2 years ago
does it harm the engine to get it wet?? i mean like properly wet ( not driving into lakes) i mean like tap water??
jthornley12 2 years ago
I have used tap water to wash the engine. just make sure you seal the carb right and don't let any water go inside the engine. also make sure water doesn't get to electronics :D
alishanmao 2 years ago
was the TREX like your first car?? ;)
jthornley12 2 years ago
Yup it was :D
alishanmao 2 years ago
maher1oo just use the can of cand air or an air comperser
majoruly 2 years ago
Nice vid. The worse part is to clean up the body part near the exaust, the oil that stay there is so bored to remove.
SerJaumBR 2 years ago
lol yes. use some oil remover spray.
alishanmao 2 years ago
hey ali i have a question, why does one of my wheels shake violently and it affects the steering, thanks
imy2k07 2 years ago
Check if wheels are fixed properly n are tightened well. If they are, then probably the wheel axle is bent. get new axles or straightened the old ones out.
alishanmao 2 years ago
but some of the the dirt,leaves,sand ect..
gets deep into or between the parts that i cant reach how shoud i clen that??
maher1oo 2 years ago
I just leave them to be :)
alishanmao 2 years ago
Hey man just a question with washing could u take the engine out and stuff and the receiver and all the servos and just get a hose and wash it, because people said u could just do that.
Cheers
Adrian
panesyboy 2 years ago
yes you could. But best way is, spray WD40 All over everything. then goto a tire shop. or find an air compressor. just blow everything off then :D neat n quick.
alishanmao 2 years ago
Can you tell me what car you like most or is your favourite from redcatracing. Maybe i gonna buy some 1 to from there. Tey are very cheap. I have already 1 but these are might a bt better. Also helpfull vid. I learn much from you:) Thanks!
MrMortjon 2 years ago
Landslide, till now. But hey wait, Hurrican XP and monsoon XTR Will be here soon. so Can't say yet. Cuz Hurrican XP is professional buggy :D till now, Landslide :)
alishanmao 2 years ago
What is "damp" cloth. A little bit whet?
MrMortjon 2 years ago
exactly my man
alishanmao 2 years ago
what the after run oil?
carlbikeman14 3 years ago
Yes You can also use After run oil on Air filters ;D try it.
alishanmao 3 years ago
Oh ok, thank once again Ali!
carlbikeman14 3 years ago
Always welcome :)
alishanmao 3 years ago
Hi Ali, i was wondering if i could use any thing to use as air filter oil, apart from the actually air filter oil stuff that you can get in shops, i was wondering if there was anything you can use at home maybe?
carlbikeman14 3 years ago
I tried car engine oil. worked great :D
alishanmao 3 years ago
hi its me again..sorry if the question i ask has been answered(i couldn't read 131 comments :P)so pls ali tel me if the metod for washing i use is correct:i take weels out then spray the truck whit foam(from the carwash)+water,i leave it 5 minutes to disolve all the dirt and grease then i shower it nice(all the truck) then dry it whit hair dryer...if u remember i asked u the question about the electronics into the water(and u sad its not big problem)ps what about the water in tiers is it bad?
dark1tdr 3 years ago
hey mate, I wash the tires by water too. But I found some rusting appearing due to using water on different metal parts. So now I just spray WD40 or other cleaner on car, Wash away the spray after 2 minutes using water making sure it doesn't get to battery compartment. Then I clean it with cloth n spray WD40 all over. beats rusting :) Cheers Just make sure you spray rust beating thing after wash.
alishanmao 3 years ago
you should make an updated video of how to use your new method, I learn A LOT better if i can see it :)
n1troskull 2 years ago
depending on time, will try to go for it ;D
alishanmao 2 years ago
ure videos always prove effective nice work man
rubinmeneps 3 years ago
Thank you mate :D
alishanmao 3 years ago
it took me 7 months to tune up my car beacuse it was faulty and the company would not take it back
theheavensjoker 3 years ago
can i actually use and put wd-40 right in to the engine cylinder and the carberretor then?
cheers
guitarboym12 3 years ago
yes you can. Later you will have to prime the engine well and it will start. However some people found it difficult to start after they used WD40 inside engine. I'd say to be on safe side, before starting after you have sprayed WD40 inside carb n piston area, take out the glow plug, put nitro in carb directly, n onto the piston, pull the starter to unflood the engine and then, put the glow plug back in. It will start easy. no worries
alishanmao 3 years ago
don't write this in the clip:
"n do not for get to clean up after cleaning your rc nitro car or truck. do not leave this part to your wife or girlfriend. you can get into trouble."
but this is very good:
"Do not forget after cleaning your nitro RC car or truck to clean the bathroom. to this part (cleanliness) of your wife or girlfriend can be in trouble."
MustangD2008 3 years ago
thats a nice line. But I can't edit this video anymore. Lost the original :D
alishanmao 3 years ago
YOu always sound sexual baby;)
admir2323 3 years ago
LOL :) Thanks
alishanmao 3 years ago
hi i have a few questions can u use compressed air instead of water ?
can u cover the card with somthing after u take that air filter off? plz reply=)
also great vid
donkeykon131 3 years ago
Hey, compressed air or air compressor is the best choice to do it safe and easy. Don't remove the air filter. spray WD40 or similar liquid all over the body, then just blow everything away using air compressor. Car will be like new again. Later when dirt is cleaned, you can take out the air filter and wash it. dry it, apply airfilter oil n you are done :)
alishanmao 3 years ago
hey can we use petrol to run the engine?
christychackojohn 3 years ago
nooooooooo, don't ever put the petrol in a Nitro Engine :D. If you want to run on petrol, you can buy a 1/5 scale gasoline engine 26cc truck :) those things are awesome :D
alishanmao 3 years ago
What is a nitro fuel?
christychackojohn 3 years ago
Its the fuel for Nitro Engines :) heheh. Nitro Methane mixed with lubricant oil with 15% to 30% rate. The only fuel that nitro engine can run on. Don't ever use petrol in nitro engine :D
alishanmao 3 years ago
hi m8 please respond can u use nitro cleaner on a tooth brush to clean it or not thx joe
joe0wnzu 3 years ago
Never tried it. you can always experiment. no worries ;D
alishanmao 3 years ago