careful about running engines without exhaust tho, engines have exhaust pipes for 2 main reasons: 1- obviously so you dont blow your ears out, but 2- for backpressure. your engine needs backpressure to run correctly
wow , im suprised it ran so well withought the muffler, usualy 2 stroke engines have mufflers with harmonicly designd interiors to creat a shokwave of sound that blast the exaughst out of the engine, cool fid though , i luv your test run vids
@jdstooge yea usually you wanna port the intake port downwards a bit and widen it, and the exhaust port slightly towards the top and widen it, that will allow the fuel/air to be drawn in in advance and allow the exhaust to start leaving the engine sooner aswell, the widening just increases the flow of the port.. Good luck!
@pow0006 I just gave it a quick twist last night and the rust in the cowl gave out and she turns most of the way (exh valve is sticky, don;t wanna force it)
@Aussie50 It was suggested once to put a piece of tape over the microphone, like scotch tape, It helps wind noise I wonder if it would make a difference in this case?
I dare you to stick your fingers in there XD
JILLESEDEN 3 weeks ago 2
Remind me not to move in next door to you!
breezerabbitz 4 months ago in playlist More videos from Aussie50
proves how much e-bikes suck, thats 20hp and the same size as a battery
fairyheli2 5 months ago in playlist fairyheli2's Favourited Videos
what is this engine for
jetguy1205 8 months ago
careful about running engines without exhaust tho, engines have exhaust pipes for 2 main reasons: 1- obviously so you dont blow your ears out, but 2- for backpressure. your engine needs backpressure to run correctly
lomira123 10 months ago
wow , im suprised it ran so well withought the muffler, usualy 2 stroke engines have mufflers with harmonicly designd interiors to creat a shokwave of sound that blast the exaughst out of the engine, cool fid though , i luv your test run vids
NOBOX7 1 year ago
yer thats LOUD! :D you need moth balls in your fuel if you want flame.hehehe
V8Jagnut 1 year ago
@V8Jagnut lol yeha it was a flame thrower when it first fired :D. no naphthalene needed
Aussie50 1 year ago
Lol, Flame out from old boat engine. Lol I saw you smile. Hey Dude, Merry Christmas
john1966elliott 1 year ago
could port and polish job be done on such an engine?
jdstooge 1 year ago
@jdstooge possibly, if I know where to remove material from
Aussie50 1 year ago
@jdstooge yea usually you wanna port the intake port downwards a bit and widen it, and the exhaust port slightly towards the top and widen it, that will allow the fuel/air to be drawn in in advance and allow the exhaust to start leaving the engine sooner aswell, the widening just increases the flow of the port.. Good luck!
carlosr428 6 months ago
It would be the beastiest motorized push bike ever! Just need some good enough brakes :p
Twizt3dArc 1 year ago
If you really want to make her scream, stick an expansion pipe from a ~250CC bike on it. Should really liven it up.
amfan12 1 year ago
for cooling couldnt you run the water though the frame?
05clenharth 1 year ago
I hate 2 stroke. The sound they make and how noisy they are. I dont like them. Plus having to mix that gas all the damn time just a pain lol
travisjeanelle 1 year ago
If you succeed with that bmx-thingy you will be one fast aussie !, lolXDomg.
robinhooodvsyou 1 year ago
There is something very wrong about seeing someone wear tshirt and shorts when there is a foot of snow on the ground here.
lazaglider 1 year ago
@lazaglider lol yeah, but I still had the heatpump on!, it was a odd day, hot in the sun bet got cold quick in the shade!.
Aussie50 1 year ago
Aha! i see the mk40 villiers in the background, looks like some fun for the christmas holidays for you!
Merry Christmas!
pow0006 1 year ago
@pow0006 Those 3 will be great fun!, its a Mk20-RD tho, very seized at the moment but it should come good if I have anything to do with it :D
Aussie50 1 year ago
@Aussie50 I remember the mk20-RD now ,thats the one that has the reduction gearbox on it.
Hope it comes unseized.
pow0006 1 year ago
@pow0006 I just gave it a quick twist last night and the rust in the cowl gave out and she turns most of the way (exh valve is sticky, don;t wanna force it)
Aussie50 1 year ago
I think you may have damaged the impeller, or the p-hole is clogged!
kodibass 1 year ago
@kodibass lol what impeller?. the leg is long gone, I will use external cooling when I run it for a long time.
Aussie50 1 year ago
Audio sounds crappy:( Damn that would sound awesome in real life :D
HDXFH 1 year ago
@HDXFH yeah, none of the cameras I can get would record that sound properly.
the Sony would be worse, loud crackling sounds from the mic as it has a heart attack
Aussie50 1 year ago
@Aussie50 That sucks:(
HDXFH 1 year ago
@Aussie50 It was suggested once to put a piece of tape over the microphone, like scotch tape, It helps wind noise I wonder if it would make a difference in this case?
g60scuzz 1 year ago
@g60scuzz yeah I saw that mentioned on a hot-rod video and forgot to try it. I will do a trial today with a different engine.
Aussie50 1 year ago
may be a go kart :D
utbarthel 1 year ago
you should get as close as you can too that exhaust port for the fire for extra ratings just dont kill your camera!
walkingfreak 1 year ago
i'm sure your neighbors do not have hearing protection for Christ sake. haha your crazy and anyone around you probably dislikes you big time
walkingfreak 1 year ago