E-razor 450 RC Helicopter Review Availalble in 2.4ghz

[72newera]

one question , when i buy e razor 450 , did it comes with transmitter >?

[xhelicopter]

@72newera Yes the charger will come with a transmitter.

[xanokothe]

I never understood how the helicopter can fly upside down, I always thought that the propellers push air down, then upside down, would push the air up.

[legolarsi123]

Should I get the Belt cp v2 or the E-razor 450 as my first 450 heli?

PLEAS RESPOND!!!

[xhelicopter]

@legolarsi123 Do not get any 6ch helis as your first. Start off with a 4ch, then flight sim, then 6ch

[ObYagTxha]

is the LCD remote control comes with the e-razor 450 heli? cuz i saw other e-razor 450 owners here on youtube that got one with only the flashing light indicator. and on the xheli.com website, they got pic of both remote control on the ads. whats the different? and if i order one today, which remote will i get?

[504GENUWINE]

Im in love with this helicopter! Im getting mines today in the mail. This is a great heli for a great price with good components... I have a question to ask, what would be great servos to put on this helicopter and to tweak up the throttle speed on it???

[matt59fire]

What would be a good battery for this heli

[xhelicopter]

@matt59fire blue lipo, sky lipo, gens ace, 2200mah 4S

[Aeroman591]

I don't know why people are saying Xheli lies. RTF means ready to fly, which refers to it having everything you need to fly, as in a remote, heli, motor, battery. RTF does not mean beginner, and I highly recommend beginners to go and buy a fixed pitch or non 3D flying heli. Maybe check out the Blade MCX2, or the Blade MSR.

[andyizere92]

would you recommend this for a beginner? if not, what would you recommend?

[vincesabin]

so all of the batteries, chargers, transmitters, recievers, etc., etc., everything comes with the helicopter?



[geekprices]

on the new model the metal pin that sticks out from the swashplate is very weak it broke and twisted the 2 metal pins in the blade housing on spooling up. replacing most of the parts with METAL parts that look somewhat better + 1 servo was DOA costed me my blades then went on from there after making sure my shaft wasnt bent after removing blades then spooling up.

heli i ordered xheli_com/60h-dy8918-b-razor45­0heli-24g-red.html

[geekprices]

@geekprices make sure everything is fine before flight i overlooked 1 servo and it costed me..

[THExXXxBEST]

what does giga hurtz do or what are they

[wesajarjar]

@THExXXxBEST 2.4 ghz is the transmitter frequency, basically it will have no problem staying connected to the heli in flight.

[CASPER19822011]

Nice! :)

[venomx4x4]

Hey. I've been flying 3 and 4 ch helis and want to move up to a 6ch. This one seems great for the money. How hard is it transitioning from a 3/4 ch heli to a 6 ch? Also, is there a switch on the transmitter that would allow me to turn off the 3D capabilities until i'm used to it? Thanks.

[philip1470]

I dont think it's suss pose to fly whit head upwards down... Well at least not this model.

[thedoorsbiggestfan]

Dont waste your money on this cheap heli.You'll spend more money fixing it all the time. Just save your cash cash towards a trex450 pro.

[essantyy]

@thedoorsbiggestfan Donde puedo comprar un T rex 450 en España?

[fumochicles10]

how long can hold in air? Great video!

[GHLALogic]

My E-Razor 450 comes in friday. Yes! =)

[DavidSunshine867]

@GHLALogic

Congrats man!

Remember, the top left switch needs to be towards you to be in head hold mode.

The gyro will be red upon power up and initialization, don't touch it during it's intialization, if it turns blue in 5 seconds, you're in head hold mode and ready to go!

Is this your first heli? If it is, ask lots of questions, I don't want to see you crashing it first thing, this is a serious toy, it's fully 3D capable, so be careful!

Have you been simming like crazy? Know it inside out?

[slashmon1]

I'm fairly new to the rc heli side of things, i can fly them normally but can't do stunts, could you please explain to me the steps in flying upside down?

[monsterman1122]

i have a few questions: about how long does the battery last, how far away can you control it from, and do you know any good cameras i can attach to it?

thanks

[DavidSunshine867]

@monsterman1122

The battery will last 8 mins, but you'll damage the pack by drawing it too low, run it for 6 minutes so that your battery doesn't puff and become useless after 20 flights.

In other words, 8 mins for 30 flights, or 6 minutes for 150 flights, it's up to you!

For $14.70, xheli has a small camera that takes a micro SD card, it records 640x480 and will be perfect on this heli, not too big.

Also you should get a sim, xheli has that too. It can go as far as you can see! Don't worry.

[EVELYNEMIL]

Hello, I have my new E Razor 450 and I can not charge my battery with the supplied charger nothing happens. Any suggestion? Im new about this Thanks!.

[clintmacas]

To those who are new in the hobby...you should meet someone who knows how to fly already.....its not hard to find somebody and i'm pretty sure they'll be happy to help you...it will sure do save you some money!!!..Simply ask...."Is my helicopter set-up right??"...when i first started I was really disappointed coz it just wouldn't fly and I already know how to fly in flight G3 simulator and still can't fly it.....nyway this suggestion is for beginners only!!!!!

[DavidSunshine867]

@clintmacas

Great suggestion man! I'm subscribing to you cuz you obviously know what you're talking about.

I went down the same path, got my first heli, crashed it, knew how to fly in the sim, but didn't know about pitch curve or even idle up pitch range, it takes a long time to learn everything, maybe I should make an RC heli 101 for beginners, those who want to learn or something, it'd take some work, but would be worth it, don't you think?

Listen to this guy, he knows what he's talkin abt

[TeddyandRoyce]

what is lock tight???? please answer

[ltelkhound]

I have an E-razor 450 Helicopter coming tomorrow. I Can't wait.

[50N1C800M]

can i install a 450 fuselage on this?

[xbox360guy1988]

is this a good helicopter.. im getting it in a couple months

[TheSurfersEye]

is this helicopter able to lift an go pro hd at 179gram

[xhelicopter]

@TheSurfersEye it is possible, just needs to be in the right position and expect lower performance/battery life

[jerry1404]

Can anyone tell me if this will pair with the dx6i tx or would you have to change the rx

[Dragns80]

is this heli similar to razor 400?

[moritzrr]

Hey Xheli, I'm looking to get either the dynam e razor 450, the esky belt cp (top picks) or maybe an exceed rc g2 a walker v400d02 or a honeybee cp3, do y ou have any recommondations? I have experience on a sim and have owned 3 and 4 channel bords and am ready to take the next step up. Thanks so much

[CritterCallReviews]

@moritzrr

I've had walkera, and compared to the E-Razor, the Walkera is junk. The E-Razor is more comparable to a Trex 450SA, and that quality is pretty good, the metal head and plastic body can take a beating and keep coming back for more. The same can't be said about the esky or walkera heli's. The Exceed G2 is a Walkera 36, both are junk, the frame shatters on the first crash. This E-Razor 450's frame will not even crack on a head in a head on with the ground.

Cheers.

[hckrwolf]

his shirt says "BALLS"

[cornybuddy]

how do you fly it upside down? doesnt the motor then spin the other way around? im just wondering because i dont even have a big heli and i only have those dual axle ones.

[lckyl16]

@cornybuddy

the pitch of the blades changes only...the motor spins in the same direction at all times.

[cornybuddy]

@lckyl16 wait so ur saying that the blades can rotate and the angle of the blades will change???

[ClippleNips]

@cornybuddy

That's the only way it would seem to make sense, wouldn't it?

[CritterCallReviews]

@cornybuddy

Some heli's are fixed pitch, some are variable pitch, this one is variable pitch, which makes 3D capable. Some planes have variable pitch blades as well, so the plane can stall and fly backwards.

This heli uses a 120 CCPM washplate to control the main blade pitch and cyclic pitch. The main blades change from about -12 degrees to + 12 degrees, if you want more, you'll need to upgrade the radio to a more advanced one with all the options for adjustments.

But this is a good heli.

[ZienekSabur]

Hey. I've always been interested in rc heli's and I wanted to know if this would be a good helicopter to start on? I've recently been flying a mini 3ch co-axial with a gyro. Its not mine, so I was looking into getting mine own. I would like a good helicopter that is fairly easy to learn on but I will also be able to advance with it. Any help would be appreciated. Thanks.

[MarioLoco03]

Jet Li, Thanks for the review lol. Im going to buy this now.

[TheAthensWarriors]

Thanks for your kind reply, may i know that in case I will order a set of screwdrivers can you dispatch to Greece? And which will be the cost

[TheAthensWarriors]

Hello there, since I’m new pilot I’m agree with you that certainly will need the flight sim kit. consequently please be so kind and let me know in which site I can buy this and I will need also some tools such screwdriver etc

[xhelicopter]

@TheAthensWarriors Check out Xheli. com, all screw sets are available as well! -cn

[DavidSunshine867]

@TheAthensWarriors

For everyone to know, if you are NEW to helis, expect to crash, and expect to repair it, so buy spare parts and GOOD TOOLS!

GOOD TOOLS!: What I mean by that is a HIGH QUALITY 1.5mm HEX DRIVER, just drop the money and get an ALIGN driver, they are the best, and cost the most, but when you strip a 1.5mm hex, you'll realize what a headache it is, worst thing on earth. Align has two 1.5mm drivers in a package, GET IT! You need TWO for the feathering shaft.

I just saved you!

[DavidSunshine867]

continued...

Oh and if you're wondering, I learned from MY MISTAKES. I purchased all the cheap tools and found out the hard way. Bondhus is considered good quality, but failed to compare with Align still. ALIGN is the best, no competition, even with industry's best tools such as Snap-on, etc.

Every handyman knows, spend the money in the tools, the rest doesn't really matter.

Bigger hex drivers can be cheaped out on tho, no big deal, they don't strip easily.

[aerialboy55]

Lol at the "balls" shirt tony is wearing, alon with pin and 2 balls.

[SuperScguy]

lol grab your balls

[ecoovert]

Fantastic video? I am a new electric 450 heli pilot and when I take off my heli spins as much as 60 to 90 rpm when my stick is in the neutral position. When I adjust the trim only one click it's as if I moved the stick all the way in that direction. How can I reduce the sensitivity of the trim? My rudder is channel 6 and I tried adjusting the sub trims to no avail. How can I reduce the range of correction my trim has only for the rudder as my main blade trim and throttle trim... work fine?

[murojd]

If I get the 2.4 Ghz can I hook it up to one of my DX6i or can I buy a bnf verison or do I need to buy the remote with it

[jcer93705]

So the either the fm or 2.4 it comes with carbon fiber blades?

[97Dannyt]

i am ordering one later tonight hopefully and i was wondering which switches i have to swith to make it reverse thrust or whether the throttle stick starts halfway up then if you bring it down below halfway it makes the helicopter fly downwards plz reply!!!

[cubiundmetin2]

wie lange kann man mit dem anfangs akku fliegen und wie lange lädt er?

how long can you fly with the standart battery and how long need it to load the batterys?

[ZXETIT]

is this a good for first 3d heli

[ZXETIT]

is this good for a first 3d heli?

[ZXETIT]

is this good for a first 3d heli

[n3utical]

this guy look's like thin jet li :P

[Charkzilla20]

Get a Dx6i (and receiver) if you get this heli (receiver ready version from Xheli) if you got the money. You'll be glad that you did! The ERazor does look a little better design than the G2. Plus the erazor has C-Fiber blades and aluminum rotor head and tail.

[BluesGuitares]

One more thing. It's not bashing if it's true. My big problem with these companies is that they advertise a much higher quality rtf than is delivered. Possibly it would be better to NOT offer rtf's in this price range. They're just too dangerous. Untill that happens, I will let newbies know what to expect from these choppers and these companies.

[BluesGuitares]

Nothing in a rtf in this price range from these types of companies is worth buying. Cough up the extra cash and go with Align, Thunder Tiger, Horizon.....................

[unsc2295]

hey i just got one of these but the batter charger make a lot of noise, like nails on a chalkboard and constant high pitched beeps, please tell me this isn't normal!

[xhelicopter]

@unsc2295 If by noise you mean a certain "whine" then yes. Some chargers will experience a while when charging. If you feel that its at a unbearable level please give our tech support a call

[CritterCallReviews]

@xhelicopter

My charger makes a whining noise, it's normal, all transformers hummmmm. It's because electricity is delivered @ 60hz in North America, transformers have to convert this and rectify it to DC voltage to charge your DC battery.

Completely NORMAL for chargers to make noise.

Expensive chargers don't make noise, so if anyone finds it annoying, just buy a better charger!

The better chargers can reduce your charge time as well, so it's worth getting.

[ilikemynachos]

where do you get that shirt :) Hold your balls olo

[BluesGuitares]

Update on my razor. After 3 wks the 3d switch snaped off with the switch, unexpectedly, in the 2 d mode. Total loss. I am going with a Trex 450 clone. Do not buy this bird or any from this company!!!!!!!

[jefferyjay01]

I've been looking at the E-razor 450 and the G2. Do you have a favorite of these two? It seems like the E-razor is a little better built, but the G2 has a better Transmitter. Any suggestions?

[xhelicopter]

@jefferyjay01 If you already have experience with flying then the E-Razor should be a fine addition, don't worry too much about the transmitter

[BluesGuitares]

@xhelicopter From a memeber of their staff!

[BluesGuitares]

@jefferyjay01 Niether, DO NOT BUY From these 5 companies!!! They are nothing more than a chinese wharehouse!!!! NO customer serrvice!!!

[jefferyjay01]

@BluesGuitares

Thanks for the reply, but that really does not remotely answer my question. Maybe you could provide a useful alternative to one of the heli's I suggested and possibly a vendor instead of just bashing xheli.

[BluesGuitares]

@jefferyjay01 To everyone. It's very possible that ALL the good comments are employees of these companies!

[TheBigOne1414]

@jefferyjay01 i have been doing the same thing i would recoomend the erazor 450 2.4 ghz version

[TheBigOne1414]

@jefferyjay01 get the e razor

[rcflight13]

Fantastic sound, nice looking, well priced, however I bet those metal parts would be expensive to replace. Might order one once I get a stable job. 

[davpad]

your a liar xhelicopter im doing flips and rolls and the timer on my remote says 20:00 minutes and it still has lots of charge

there is just one problem with this helicopter, you cant take of from inch high grass or soft dirt because the tail rotor hit the ground. i recommend short grass or concrete

[BluesGuitares]

This chopper can be had at a few different sites. DO NOT buy from xheli, nitroplanes or hobhypartz, they may have more .coms. The RTF models are NOT ready to fly, you must have experience.

[basshoundusa]

@BluesGuitares RTF doesn't imply no experience needed, it means its READY TO FLY, as in no external part required to be able to fly the heli.

[BluesGuitares]

Just a heads up here. There's a lot of good quality birds out there, be carefull who you by from. In my exprerience, nitroplanes and xheli are not up to our standards. Again, the product's are good. Many times though, the products are not as described. What these guys call RTF is not what beginners want to get into. Their customer service, tech support, and interpretation of what the products should be cappable of doing are far from advertized!!! Be carefull.

[dayl791]

you're a lier... out of the box is a total mess... ( the tracking and the gain was dead on) big fat lie...

[davpad]

nice t-shirt (-:

grab you balls we're going hahahahahahahahahahah

i just got this heli and its awesome but how do you fix the throttle problem

[basshoundusa]

Just ordered one, can't wait to try it out

[xhelicopter]

@basshoundusa Cool, post up videos once you do

[BlackDart94]

how is this heli for a beginer

[xhelicopter]

@BlackDart94 Not considered for beginners at all, I recommend that you try our the 4 coaxial then slowly advance to the 6chs, Also note these are extremely difficult to fly for even the best beginners

[BlackDart94]

@xhelicopter well i have been flying rc airplanes for about a year now and i now the

there is no realy similarities between helicopters and planes, besides the bbasic of flight

[dayl791]

@BlackDart94

don't buy it i just bought it not for beginners... tony is a lier out of the box is a total mess

[BlackDart94]

@dayl791 how is it a total mess??

[dayl791]

@BlackDart94

tony said on the video that the gain was dead on the tracking was dead on ( out of the box.) that's a big fat lie and i said what i said for the question how's this bird for some body just starting heli's it's not ( i bought one and out of the box the servo arms don't go all the way like they're supposed to cuz they get stuck the tail servo is of limit the gyro is off i could go on and on with the list buttom line you have to be an advanced flyer and set it up like from scrach

[BluesGuitares]

@BlackDart94 NOT a beginners bird. Only experienced pilots should apply!!!

[legopuff246]

which is better? this or the belt cp 450 v2? im thinking to get this because the rotor head is made of metal. which is more aerobatic? i have a e flite blade sr. also is this better than a blade cp pro 2?

[ArvindKapila]

About how many minutes of flight time can you get out of a full battery?

[xhelicopter]

@ArvindKapila at least 5mins flytime depending on your flying style

[UnkleSi]

I just bought the 2.4ghz from Xheli. I'm in New Zealand, only took a week or two to get here. Flies great right out of box. This is my first 6ch, I've been learning on an HBFP. First hover yesterday in the garage with the ERazor, feels fine. Doesn't develop positive pitch until a long way up the stick but I think I can adjust that on the tx.

[archer7153]

Is this heli compatible with trex parts

[DavidSunshine867]

Some parts are compatible with the Trex 450 SE V1 or SA head, it uses the V1 feathering shaft. The tail shaft/tail boom/landing gear/fins, main(325mm)/tail blades are also swappable. The servo mounts are also the same.

The things that aren't the same are the main shaft, tail belt, head/tail assemblies, canopy(unfortunately, mounts are too far forward), and main frame.

It's a good heli. Now they have the 2.4ghz version, which is awesome because 2.4ghz is much more reliable than 72mhz.

[BIGGBULLxxx]

Man, the tail motor holder on my madhwak 300 broke from a 2ft hover drop on plush carpet in my bedroom and it was not that hard of a drop.

[2010scott1995]

Do you ship to Australia, Melbourne and if yes how long will it take? i'd also like to know how much this heli is in AUS dollar

thanks

[xhelicopter]

Hi, please go to xheli . com and search for "E-razor 450". Try ordering it and you can see the cost of shipping. Good luck!

-Teddy from rcdiscuss . com

[BIGGBULLxxx]

I hope you guy's are not one of those company's that just sell an item and it's remaining parts, and once gone...one will see them no more.

[xhelicopter]

We support our products fully. We are trying to retain customers, not drive them away. =]

-Teddy from rcdiscuss . com

[BIGGBULLxxx]

Hey when are you guy's gonna stock up on your helicopter's and helicopter's spare parts. You seem to be out of stock for a long time on heli's and heli parts. And it's been more than a month on other RTF heli's and parts that I've been watching and waiting for. What's up with the long wait???

[xhelicopter]

We have no control of what the manufacturers makes, but you can probably find better and newer helicopters on our website that are in stock.

-Teddy from rcdiscuss . com

[BIGGBULLxxx]

Do this heli breaks easy? Because I have the madhawk 300 and that sucker breaks so easy, that if you sneeze to loud it will break.

[xhelicopter]

That's a bit of an exaggeration. The E-Razor 450 does not break easy, but if you crash hard enough, it will break. The Madhawk 300 does not break easy either. If you crash hard enough, it will break.

-Teddy from rcdiscuss . com

[t07xqj4o]

Indeed the madhawk 300 does have an intrinsic flaw with its tail rotor blades; mine broke from a 2 feet drop on flat carpet too. This than can further be attested by the constant 'out of stock' stats for these replacement blades on your website. Anyways, can you put together a substitute tail rotor blade for this chopper as an alternative on the parts page of the madhawk? We really need to get back into the air...

[DavidSunshine867]

This heli's not bad, I've crashed it before and it breaks just like the Trex 450SE V1, which means the frame doesn't explode. You basically have to replace the feathering shaft, main shaft, maybe tail boom/belt and tail shaft, if you hit the tail.

There are helis out there where the main frame explodes, take a look at the pictures, if the frame is made of thin supports, it'll break.  This one is made of thick plastic, and holds together well during crashes, except the landing gear.

[t07xqj4o]

Not realy, it is so graceful in its movements that if it does manage to slip out of your hands and crash you'll break or bend the feathering shaft, bend the main shaft and bend the flybar. Your bearings/washers and O rings will fly out into the grass too if you do break the feathering shaft. Depending on the intensity of the impact, damages can extend beyond the head assembly. Tail boom is not chopped in a crash as is always the case with the Raptor G2 although the G2 is a good chopper.

[sgtcortez1]

i ordered it today i won't be disappointed right? it will be my first heli .

[xhelicopter]

If this is your first time flying, I strongly recommend that you Start off with a 4ch helicopter instead. You will avoid expensive repairs from crashing. But if you do insist on starting with this one, then invest in a training kit and Flight Simulator.

[DavidSunshine867]

Only 1 guarantee if you don't simulate first, is that you'll crash it and be disappointed.

Learning to fly an RC heli is the same as snowboarding, every crash is a fall. If it's your first time on a snowboard, you'll crash, same with this RC heli, it's a 3D bird, and being so, you need to learn how to fly it, or you'll crash.

Simulate enough, and you'll be able to fly it for the first time without crashing. Assuming you don't crash in the simulation.

Good luck!

[TheAthensWarriors]

@DavidSunshine867

Dear David,

Few weeks ago I have purchase a helicopter model razor 450 directly from the manufacture company in China and they tall me that they dont recommend the flight simulation system because infect the flight system of heli system is this correct?

Looking forward to receive your prompt reply, thanks in advance

[DavidSunshine867]

@TheAthensWarriors

hey,

This Heli is meant for beginners, but without practicing on a computer simulator, you will have no skills to fly it. Like learning how to ride a bike, if you jump on a bike and have never rode, you will fall in 1 second. If you practice, you can go all day without crashing. It will not infect the flight system, only positive gains will be noticed, in your skill and flying abilities. Get a simulator, it is essential to flying an RC Heli.

Cheers.

[MaximD9]

@TheAthensWarriors Yes get the flight sim it is well worth every penny I have the razor 450 and bought a flight sim too !!! If you've never flown before you WILL CRASH your first time and be out till you get replacement parts. get the sim and practice and you will be much happier!!!

[sgtcortez1]

how long does the battery last ? i am planing on buying one but i don't want to get something that is only going to last me 10 minutes.

[xhelicopter]

Depending on how you fly it you can actually get more than 10minutes, but if you plan on going 3d most of the time 10minutes is what you'll expect from this heli

[DavidSunshine867]

10 minutes is more than enough for an RC heli, your heart will be racing, adrenaline will be running through your veins, and you'll want to land within 3 minutes.

My CopterX with an 800Watt motor on there lasts 2.5 minutes, it's MORE than enough flying time for one flight.

With this heli, you're more going for the excitement of 3D, not 10 minutes of boring hovering.

I would suggest against the hovering!!

[MikeysRC]

I'm going be reviewing this helicopter on my live show tonight 6:30PM Pacific time Go to mikeysrc dot com and click on the Weekly Group Chat button at the top of the page.

[Spaeckli]

do you ship to switzerland?

[Fetherbutter]

is there some place you can go to get help with this product. Im new to rc heli's and my wife got me this for x-mas .. So i need to learn as much as i can before i go braking it so i know what to fix!

[xhelicopter]

Hi Fetherbutter, you can go to rcdiscuss . com for all the help you need. We have a great community and a team of specialists that answers questions all day. Good luck!

-Teddy from rcdiscuss . com

[DavidSunshine867]

Fetherbutter,

Forums are good(rcuniverse), if it's specific you can ask me if you've got any questions, I've done a complete teardown and rebuild of the 450. This bird is quite simple, actually easier than a Trex 450. Don't get intimidated by all the parts, it all comes together intuitively.

Cheers.

PS: Your wife's awesome, she got you a good bird.

[akdude47]

You say "guys" a lot.

[xhelicopter]

Of course, that's his thing. In the future, everyone will know it's him when he says "Hey Guys"; don't even need to see him, just hear his voice.

[AdamDiddy]

Just bought this from XHeli. It will be my second heli. Can't wait for it ! Woo

[xhelicopter]

Grats!

[DavidSunshine867]

It's a good 2nd heli man. You'll like it.

I even like it and I've already got a CopterX 450 SE V2.

The E-Razor can do 3D out of the box, but don't go inverted right away, you should take it easy and get a hang of it first.

It's got a little less power because the radio has a low mid point in idle up, but no biggy, upgrade to the 2.4ghz radio they got going for less than $50 and you can make all the adjustments you want.

[J444123]

im getting one right now, how long did it take to get it?

[xhelicopter]

depending on your location, it ships out of california, and takes 5 business days to NY,

[J444123]

Awesome, Thanks, im in Kansas. I love the low prices!

[Didgeman80]

"Grab your balls, we're going bowling!!"

Nice shirt and nice heli

[DavidSunshine867]

Good review Tony!!

Ya, I've got this helicopter too, it's a good one, probably the best RTF out there. It's too bad the radio is so limited, otherwise it'd be much better, like you said, midstick is stuck at a low throttle. All that could be fixed with a quick upgrade to better radio though, then this thing would be better for 3D.

Also, you said the screw adjusts the gain, it won't adjust it unless you unplug the gyro gain wire from channel 5, the CH 5 switch adjusts the gain from HH to RH

[xhelicopter]

Hey, Thanks for the tip. I agree as this is an Awesome RTF for the price. Post up videos if you have any

[DavidSunshine867]

Ya, it's truly RTF out of the box. They've set everything up quite well, and used locktite where needed.

One bad thing is the manual, it could use some work, but you can learn everything from the net, so it's not big deal.

Ya I got a vid up, more to come!

Cheers.

[kidcalzoncillo]

I want this! i am from Puerto Rico who i orden one? send me the link.

for PR!

[xhelicopter]

Link is in the description

[rccrazer]

hey 3dt! can you show us the 250 and tell us what you think about it?

[xhelicopter]

250 review is on the way!

[shakedown71]

torn between the exceed blue ray 450se and the e-razor 450 metal. any suggestions? differences?

[bluesnyth]

Does it come RTF?

[xhelicopter]

Yup, comes out of the box ready to fly

[GrubFlyer]

Oh gosh your shirt is hilarious

[erasmo559]

i want 1 :(