Here is how to stop it 1 add a thin pc of cardboard to make it a little tighter in your mag. 2 scrap the stop in your adapter so you can slide the mag farther in cut so it fit's the curve of the barrel pipe and glue or screw in place... Hope this helps
Wow. My typing sucked. What can I say? It's my Friday. Imagine a number 8 where the golfball hits the top circle and it pivots in the middle, then the bottom circle moves in and keeps ball 2 from dropping. I hope that helps.
I can tell you how to stop your double loading issue. I just hope I can explain the picture in my mind without 1,000 words. LOL Imagina a teeter-totter in the outside of your "magazine" where the 3rd ball in line bushes the teeter-totter out while the other end pushes in a pin/cam to block the 2nd ball. I think cams would be best to avoid getting caught in your spring. Plus you could make them very "low-profile".
@johnnygization my pipe is 1.5" sdr 26, but the proper pipe is sdr 21, although it is very rare and hard to find. Any thin walled 1.5" pvc pipe should make a good enough golf ball barrel but sdr 21 is the best.
put a notch in at the spot where the golf ball is loaded then once it is loaded in it will only let 1 ball in
mybestdayever 1 month ago
should i make dart gun or golfball gun
sebbyjuice 3 months ago
@sebbyjuice both :D
techwizzy 3 months ago
easy use a detent
teamtaylor4444 7 months ago
Here is how to stop it 1 add a thin pc of cardboard to make it a little tighter in your mag. 2 scrap the stop in your adapter so you can slide the mag farther in cut so it fit's the curve of the barrel pipe and glue or screw in place... Hope this helps
TheWolfster001 7 months ago
Wow. My typing sucked. What can I say? It's my Friday. Imagine a number 8 where the golfball hits the top circle and it pivots in the middle, then the bottom circle moves in and keeps ball 2 from dropping. I hope that helps.
poopingandroid 9 months ago
I can tell you how to stop your double loading issue. I just hope I can explain the picture in my mind without 1,000 words. LOL Imagina a teeter-totter in the outside of your "magazine" where the 3rd ball in line bushes the teeter-totter out while the other end pushes in a pin/cam to block the 2nd ball. I think cams would be best to avoid getting caught in your spring. Plus you could make them very "low-profile".
poopingandroid 9 months ago
thank you you have inspired me and i now have pretty good idea on how to make my bolt action air cannon for paint ball
fierwall5 10 months ago
@fierwall5 Good luck! :)
techwizzy 10 months ago
That's how chuck Norris plays paintball!! :D
ilovesniperswoohoo 1 year ago
@ilovesniperswoohoo chuck norris uses a real gun for paint ball.
midnudi4556 5 months ago
what size pvc pipe are you using for the barrel?A golf ball doesn't fit in 11/2 inch pvc pipe
johnnygization 1 year ago
@johnnygization my pipe is 1.5" sdr 26, but the proper pipe is sdr 21, although it is very rare and hard to find. Any thin walled 1.5" pvc pipe should make a good enough golf ball barrel but sdr 21 is the best.
techwizzy 1 year ago