casio fx 82ms trick to convert into fx 570 ms and do complex vectors and equation calculations

[irfanadli97]

i succesfully hacked my 350ms ,but i cant find the matrix and vector option(in 570ms i have to tap shift then MAT or VCT)my question,how to Dim ERROR just like 570ms in 350ms...help please..

[irfanadli97]

to do this hack,there's two things y'all must check bfore hack,1, try to 131313131313 rapidly at high speed ,if the respond is slow,you cant do this hack,2,some chinese fx350ms and 570ms can do this hack BUT some of them cant,to detect 'em,tap the mode button till y'all see the DISP option,if there's something after the DISP,(something that you can change the contrast of the display,i forgot that name)YOU PROBABLY CANT DO THIS HACK...ughh..

ROFL.....

[val2414]

thank you very much, i used this in our exam in complex mode, very helpful.! . ahmm. how about the matrix mode? how can i use it?

[madeinindia20]

love it!! thanks so much!!

[MultiSupernaeem]

THX !!!! NOW I HAVE TO SCIENTIFIC CALCULATOR!!!! YEAH!!! KEEP ON POSTING VIDEOUS!!!!! THX!!!!!

[EduardoReyesT]

Check if this calculator has a "A" behind (in the little engraved part right-up corner) or doesn't have anything, IT CAN'T HAVE A "B" It must have nothing or a "A", if yours do have them then open it, identify the P4 pin and make it break, I scratched it all with a screwdriver. Then open it and it does the same as the video but now it's permanent.

[Ahsan0Ullah0Burki]

@EduardoReyesT ya its a version but there is no pin p4 in mine fx 82ms..

[EduardoReyesT]

@Ahsan0Ullah0Burki Yeah, only ES series and behind the calculator it most have a letter "A" or no letter at al engraved, If it has a "B" behind it won't work.

[Ahsan0Ullah0Burki]

@EduardoReyesT i think that trick is for ES series

[Pukhtoonzalmay100]

@EduardoReyesT u mean to open the calculator screws?

[EduardoReyesT]

@Pukhtoonzalmay100 Yes

[aaron46541]

thanks a load,damn it helped me a lot,good god you are a f***n genius,thanks again brother !!peace.

[gumgumbegum]

thanks bro it helped a ton

[TheMattCN]

BAHNI WHALLID!!

[muhammadmoin74]

magar ahsan0ullah barki bhai jab mein shift+7+on aik saat daba ta ho0n to mjhe screen mein cmplx,vct,mat,eqn sab nazar aate hein to is ka mtlb to ye hua na k mere calculator mein bhi cmpx,vct etc k functions hein?reply plz

[Ahsan0Ullah0Burki]

@muhammadmoin74 no lazmi nahi,,

they use same screen accross many series,,oeecha board and ic's same nahi hothay,,

have u tried on someone else's fx82ms calculator?

[muhammadmoin74]

@Ahsan0Ullah0Burki han aap sahi keh rahe ho yahi baat hogi kyun k mera calculator bhi china ka hi hoga mein kisi k original calculator mein ye trick apply kar k check karo0nga and thnx for helping me to solve my pr0blem.

[muhammadmoin74]

bhai Ahsan0UllahBurki mere calculator mein nai horaha hai ye btao k aap ka original hai kya bhai mjhe nai samjh mein araha sare steps mein ne ghor se dekhe magar akhri steps mein ko syntax ya math error nai araha sirf value arahi hai aur vo value ye hai 1.31313131313131313131 .... ab aap btao k mein ye trick kaise karo0n aur plz mere is comment ka jaldi reply karna...

[Ahsan0Ullah0Burki]

@muhammadmoin74 not sure buddy may be u r missing something ,, or its china fake ,, try on other genuine if u r successful will then know thats urs is unfortunately fake,,

[eitherrideordie]

Using a casio fx82ms, and worked perfectly :D, thanks so much for that

[SHREYAS1112]

i see math error instead of syntax error..!

[TheBlitz613]

it works withmy fx 95 ms, but the vector mode did not appear... need help! thanks

[nicklegge]

Just wondering, this works for my casio fx 100au calculater but it gets only one more function- EQN not matrices. I need a calculator with a matrices function. My question is after this trick is applied for this particular calculator and you are inputting matrices. The keyboard doesn't appear to have a MAT button. Which buttons would you use instead to use the corresponding matrix functions? such as inverting a 3x3 or 4x4

[Ahsan0Ullah0Burki]

@nicklegge basically look at the keyboard of fx991 or 570ms the buttons after the trick will be same.. so just have a look at the buttons for matrix in 570 then use that in urs::)

[acmeengspl1]

great Superb. kon kehta hay pakistani's mein talent nahinhay........ SUPERB BUHAT ALaaa

[Ahsan0Ullah0Burki]

@acmeengspl1 thanks for liking

[TomTomG00]

works, simple, is it possible to make it permanent?(without buying a 570ms and replacing the circuit boards :P)

[paulokroetz]

Very useful! Thanks!!

[mrrmee1]

no i am not!

I have been trying a lot! it doent work!

i'll tell you what i do:

mode->2->0->(+m)*80->=->2->up-­>1313...1->=

it says "Freq80=1.3131..."

what's wrong?

[Ahsan0Ullah0Burki]

@mrrmee1 u should press 0 before pressing 1 the second time a menu appears ,, even though 0 is not one of the option,, i have mentioned it in video,, please watch it closely again,, u ill succed this time

[Radhikanadar]

no still it didnt wrk

[Ahsan0Ullah0Burki]

@Radhikanadar bizaarae icant explain ,, i never had failure with it,,

[Ahsan0Ullah0Burki]

@Radhikanadar i m lost then cant explaoin... have u tried on smeone elsre calculator? at least i have never came accros any 82ms that was not able to be converted,, may be it has changed board,,, try on others calc ,, u may have some luck ,,

[drugeoznake]

@mrrmee1 same to me

[dynamicaster]

@mrrmee1

dear firend

I use this this method and I got success.thanx

Aster

use this

mode,press2,press 0 (zero),press M+ continue until n=80 and press one more time it show data full, press =,press 2, press up errow,it show freq80=, press 1313131313............,press=d­ata full,=,press 0,and then a,= it show syntax errow,press AC,now press mode you got 5 new option in mode.

ASTER

[mrrmee1]

after i do "1313...1" and press = i dont get an error...

what am i do wrong?

[daDfarSpanTaistheKin]

@mrrmee1 plz watch the video again and follow closely u may be missing somewhere,,

[muozk]

@mrrmee1 Do your calculator has one or two options on display mode (1 2)? I dont know how to do it in the 82MS that has display contrast (1)configurator, only in the old one (1)

[suhail123456789]

ty man it worked !! Thnx again.

[zeezoo94]

math error no syntax error

[Ahsan0Ullah0Burki]

@zeezoo94 i did not get ur coment ? r u asking sthing?