You can but you need to edit the launch commands otherwise the game restricts the maximum settings. The launch cmd's I used are in the video description
yes but probably not very well, gta 4 is a bad conversion and they didnt optimise it for dual core cpu's (cos the consoles have at least 3 cpus cores now and they got lazy for the pc version)
yeah, any recorder will halven framerates. without this he'd be getting a consistent 30+ frames. and thats maxed, tone it down to 3/4 max and he'd have 45+
yeh it was rec with fraps on max fps 20 (while recording) as it would stay constant on 20. Tried a few other vid's with recording fps 30 but it would drop quite a bit at times and when u replayed the vid it looked quite bad
the card was water cooled with a EK 4850 rev. 1 block.
Excessive i know but i just recently killed the card using the stock air cooler. Dam thing was crashing all the time on air anyway so when the rma comes in, back to water ;)
The Intel Q6600 comes at a stock speed of 2.4ghz and the AMD 9950BE is 2.6ghz. The AMD has 4 HT pipelines and the Intel only has 2. This means that on the AMD, each core can access RAM and other device like video cards indipendantly without having to share pipelines. This is why the 9950BE matches the i7s when using games or programs that are designed to use 4 cores like profesional audio and video software.
omfg your a idoit thats making up shit to seem smart wow dumbass
do even know what your overclockin? your not overclocking the cores retard
the cores run at a clock rate wich is determined by the dye clock the cores folow that clock rate (all of them) there for if you overclock (your dye) your overclocking 1 2 3 or 4 core and they all dont run even they allternate
way more complacated then ur made up stupid bullshit to make urself look like you know what your diong and u dont
That is not true. On the AMD 9950BE you can clock each core independantly in fact you can set it so that they clock independantly automatically if and when the software u are using needs more. This is good cos if u are using old software that is only able to recognise 1 or 2 cores then there is no need to waste power on the other cores. On a side note, I've got my 9950 running stable with 3.5ghz across all cores :)
I've now got it running stable at 3.65ghz. Mulitplier = 17.5 CPU VID = 1.45 NB VID = 1.3750 Mem VDDQ = 2.200 Mem VTT 1.500 CPU VDDC 1.356 NB Core and PCIe at 1.319 CPU HT = 1.248. I'm still a bit of an OC noob But I'm learning :p I got a similar video (link below) That proves this and the specs are in the video description :) /watch?v=I5q4wtq3CNU
-nomemrestrict removes the graphics memory cap in video settings
-novblank basically disables Vsync, this is a gd idea for powerful graphics cards as Vsync will just bottleneck them but it acts in the opposite for not lesser graphics cards, if the gfx card cant handle it it will make the games performance worse for you
yes... but you could also run it on medium high...
I have an e6750 @ 3,52, 2gb ram and a 8800GTS 512mb Top edition and I am running the game on the max I can set it to on 1600x1200 with good playeble Frame rate.
i have a amd 6000 running atm @3.405ghz on a dfi 790fxb mobo and its unplayable on max settings. I think it would work fine on low settings but the low settings really looks terrible in this game
btw just sold the 9950 on ebay, just gotta wait for 940 to be released ;D
the avg fps when i recorded this scene with fraps was 19, without recording i benched this at 26 using fraps. sounds low i know but its kind of like cyrsis, its completely playable and I tried to show one of the most gpu intensive areas of the map. in buildings 60-70, normal in game is either side of 30 fps.
I would honestly wait, im desperatly trying to sell my 9950 before christmas as the AMD phemon II 940 comes out jan 8th and that could well be a awesome cpu ;)
you are my bhadvo
sudip1308ify 1 year ago
Lol thats awesom!
i didnt know that you can check others fps with fraps thro youtube xD!
i just started fraps,Maked on full size ant i see our fps!
infera1 1 year ago
great video im planning on getting that cpu just for this game. i have a amd 64 x2 6000 and this game needs quad.
hound4680 1 year ago
There is such a great difference between 360p and 720p on your video lol!
Hotimpulse 1 year ago
does gta works on
AMD
Athlon II X2 M300
2 GHz
ATI Radeon Mobility HD 4530 512 MB
drangder 2 years ago
i have same video card
2 gb memory
2.66GHz can i run the game ? Can i run the game?
koukouroukou12345 2 years ago
You're gonna need at least 4 gigs to seriously consider running this game. The more the better.
HecG 2 years ago
2gb is enough
calvinnWOTLK 2 years ago
if your cpu is a dual or a quad core never on a single core
freaktube4 2 years ago
yes my friend have just these same
PMDGpilot737 2 years ago
can i run it on the highest settings
cpu:AMD Athlon 2x4 620 4x2,60ghz boxed
gpu:Power Color Radeon HD 4850 PCS 1024MB GDDR3
ram:Kingston Hyper X DiMM KiT PC2-8500 u (1066) 2x2GB
MainB.:Gigabyte GA-MA790XT-UD4P 790 X (dual PC3-1066 7U DDR3) AM3
Netzteil FSP Fortron/Source ATX-350PNF 350W ATX 2.01
Muhammed1100 2 years ago
You're running all that on a 350 watt system?! Get a bigger power supply before you fuck up your video card.
HecG 2 years ago 2
get atleast 450 watt maybe 500 for safe side i hv a 700watt just for a gpu like 4850
and you cn run it on probably high but what about me is a phenom 9850 as good as your cpu?
freaktube4 2 years ago
cool.i have the cpu and the same ati and is amazing play gta 4 in 1080p HD :D
psyAMD 2 years ago
you overclocked ur card gj! but you cpu is single yes? i mean its not dual core... or is it?
megadude86 2 years ago
its a quad core
cavemanleet 2 years ago
cool
megadude86 2 years ago
Hey how much 4850 cost????
UsmanIqbal03 2 years ago
they are about £70-£80
freaktube4 2 years ago
lol its even a QUAD core lol :P
i have it too
:)
qwertyxf 2 years ago
u hav 2 graphics cards?
EdYoutubr 2 years ago
no just a single sapphire 4850
cavemanleet 2 years ago
k, have u got like 1gb of memory or 512 and can i run it on high settings on original ati radeon 4850 512mb? (its from the apple store)
EdYoutubr 2 years ago
yeh its 512mb card.
You can but you need to edit the launch commands otherwise the game restricts the maximum settings. The launch cmd's I used are in the video description
cavemanleet 2 years ago
ok, i think ill stick with just high settings to get more fps because a smooth game is the best
EdYoutubr 2 years ago
can i run it on high or max settings with these specs:
3.06 GHz
same graphics card as you
4 gigs memory
and apple high quility other hardware (like the motherboard and power suple ect.)
EdYoutubr 2 years ago
yes but probably not very well, gta 4 is a bad conversion and they didnt optimise it for dual core cpu's (cos the consoles have at least 3 cpus cores now and they got lazy for the pc version)
cavemanleet 2 years ago
apple sucks
WakeupFFS 2 years ago
they dont
EdYoutubr 2 years ago
u fail
WakeupFFS 2 years ago
i do this but this is not work
kamicasu 2 years ago
How one makes something so I have geforce in 9500 gt 1gb gddr3!
However, sorry for mine badly in English I use translated programm I would like to know this with pleasure sometimes
thank´s
TheGangster83 2 years ago
lol
MikkelAagaard 2 years ago
Translators are very bad for english, there are too many technical things in it
narutoidontknow 2 years ago
9500 sucks
Riseonix 2 years ago
Single 4850 or dual?
1DCEproductions 2 years ago
just a single 4850
cavemanleet 2 years ago
Wow, 4850 is a good card.
1DCEproductions 2 years ago 3
you're goood!!!!!!1
samuelprates 2 years ago
Dude, i can see some slowdowns...is it because you were recording it with fraps?
grabedigger 3 years ago
yeah, any recorder will halven framerates. without this he'd be getting a consistent 30+ frames. and thats maxed, tone it down to 3/4 max and he'd have 45+
lolumadxp 2 years ago
yeh it was rec with fraps on max fps 20 (while recording) as it would stay constant on 20. Tried a few other vid's with recording fps 30 but it would drop quite a bit at times and when u replayed the vid it looked quite bad
cavemanleet 2 years ago
hey i have radeon 4850 and i have collectively graphic memory: 1791 MB
system graphic memory: 1279 MB
graphic memory: 512 MB
!!!
damaoker 3 years ago
average fps?
asdfxyz1 3 years ago
AMD and ATI 4ever !
ALPhawinSTEr 3 years ago 6
nvidia suck argh
the0pc0helper 1 year ago
1 419 / 501 MB :D
LukiZcze 3 years ago
WOW!! how you got your 9950 @ 3.2ghz, i think it would melt at that speed.
haz939 3 years ago 6
I got my 9950BE at 3.3ghz and its idling at 25c and It's air cooled :)
ssssroryssss2 3 years ago
What cooler you have??
mcsnakes 2 years ago
My system specs are in my gta4 vid :) /watch?v=I5q4wtq3CNU
ssssroryssss2 2 years ago
the card was water cooled with a EK 4850 rev. 1 block.
Excessive i know but i just recently killed the card using the stock air cooler. Dam thing was crashing all the time on air anyway so when the rma comes in, back to water ;)
cavemanleet 2 years ago
@haz939 AMD 9950 is 2.8 ghz so it wouldnt melt if you overclock it 0.4 ghz more(3,2 ghz)
infera1 1 year ago
@infera1 9950 is 2.6 ghz ;)
kenny13981 1 year ago
hi, can i ask what's the difference between the normal amd 9950 and the black edition? and what should i buy, the amd 9950 or intel q6600?
Sterman99 3 years ago
The Intel Q6600 comes at a stock speed of 2.4ghz and the AMD 9950BE is 2.6ghz. The AMD has 4 HT pipelines and the Intel only has 2. This means that on the AMD, each core can access RAM and other device like video cards indipendantly without having to share pipelines. This is why the 9950BE matches the i7s when using games or programs that are designed to use 4 cores like profesional audio and video software.
ssssroryssss2 3 years ago
or maybe u have mental ishues
dont talk to me agian
staticxmako 3 years ago
GTA4 is pretty much CPU power..
the graphics aren't all that good tbh
relemar 3 years ago 4
How you put your 9950+ to 3.2 ghz?I`am running at 3.137gHz with memory at 960mhz...
f0rfait 3 years ago
200*16 @ 1.45v with a dfi 790fxb mobo, it worked on 1.35v but was not completly stable.
had a black edition btw, never tried oc the htt before i sold it.
cavemanleet 3 years ago
When i do that,only one core be 3.2ghz,the others stay on 2.6ghz...By everest,CPU ID and AMD OVERDRIVE...You know why?
f0rfait 3 years ago
i have a k9a2-plat
and i just changed the multi
and got 3,2 that easy
it goes 3,3ghz with the ram at 400mhz
u dont ever raise voltage u lower the ram mhz thats all
staticxmako 3 years ago
Yes but when you change the multi just one core go to 3.2ghz...
f0rfait 3 years ago
omfg your a idoit thats making up shit to seem smart wow dumbass
do even know what your overclockin? your not overclocking the cores retard
the cores run at a clock rate wich is determined by the dye clock the cores folow that clock rate (all of them) there for if you overclock (your dye) your overclocking 1 2 3 or 4 core and they all dont run even they allternate
way more complacated then ur made up stupid bullshit to make urself look like you know what your diong and u dont
fuck off!
staticxmako 3 years ago
That is not true. On the AMD 9950BE you can clock each core independantly in fact you can set it so that they clock independantly automatically if and when the software u are using needs more. This is good cos if u are using old software that is only able to recognise 1 or 2 cores then there is no need to waste power on the other cores. On a side note, I've got my 9950 running stable with 3.5ghz across all cores :)
ssssroryssss2 3 years ago
whats is your fsb , multi and voltage at? also what cooler are you using.
thanks.
rod1326 3 years ago
I've now got it running stable at 3.65ghz. Mulitplier = 17.5 CPU VID = 1.45 NB VID = 1.3750 Mem VDDQ = 2.200 Mem VTT 1.500 CPU VDDC 1.356 NB Core and PCIe at 1.319 CPU HT = 1.248. I'm still a bit of an OC noob But I'm learning :p I got a similar video (link below) That proves this and the specs are in the video description :) /watch?v=I5q4wtq3CNU
ssssroryssss2 3 years ago
HTT 200 and multiplyer X 17, cant remeber the exact voltage but it was around the 1.5v (only used the cpu for 2 months and sold it, got a P2 940 atm)
& yeh it under water with a fuzion v2 stock
cavemanleet 2 years ago
hmm what does -novblank and -nomemrestrict do ???
Otringal 2 years ago
-nomemrestrict removes the graphics memory cap in video settings
-novblank basically disables Vsync, this is a gd idea for powerful graphics cards as Vsync will just bottleneck them but it acts in the opposite for not lesser graphics cards, if the gfx card cant handle it it will make the games performance worse for you
cavemanleet 2 years ago
hey what driver version u using?
bztheman 3 years ago
cat 8.12
cavemanleet 3 years ago
awesome i see how you think people should wait but
i cant if i wait i wont paly gta 4 anymore by that time
is that aircooled
tomshaze 3 years ago
can i run this on low with an athlon x2 6000+ @ 3.2 ghz, an 8800 gts 512 (g92) and 3 gb of ddr 2 at 712 mhz
Ajogamer 3 years ago
yes... but you could also run it on medium high...
I have an e6750 @ 3,52, 2gb ram and a 8800GTS 512mb Top edition and I am running the game on the max I can set it to on 1600x1200 with good playeble Frame rate.
Decenium 3 years ago 2
i have a amd 6000 running atm @3.405ghz on a dfi 790fxb mobo and its unplayable on max settings. I think it would work fine on low settings but the low settings really looks terrible in this game
btw just sold the 9950 on ebay, just gotta wait for 940 to be released ;D
cavemanleet 3 years ago
Phenom II FTW :D
Ordering me a 920 as soon as they are available :D
Will you be doing any videos on the 940? :)
DeadFredVideo 3 years ago
Whats the Average FPS?
Reckon with my new system I will be able too run it this well.
Intel E8400
4GB's DDR2
ATI 4850
OwzAJ 3 years ago
the avg fps when i recorded this scene with fraps was 19, without recording i benched this at 26 using fraps. sounds low i know but its kind of like cyrsis, its completely playable and I tried to show one of the most gpu intensive areas of the map. in buildings 60-70, normal in game is either side of 30 fps.
cavemanleet 3 years ago
Thanks for the vid. I'm planning to buy the same combination (phenom 9950 and hd4850) just for GTA so I wanted to see how it would run
Klokjvaarpsta 3 years ago
I would honestly wait, im desperatly trying to sell my 9950 before christmas as the AMD phemon II 940 comes out jan 8th and that could well be a awesome cpu ;)
cavemanleet 3 years ago
how did it run so good i mean just because the cpu or what ??
magicjohnson789 3 years ago
i think its mainly the graphics card but I havent checked how cpu intensive gta 4 is tbh
cavemanleet 3 years ago