TAMIYA CUSTOM HIGH PERFORMANCE TT-01

[GenetiX881]

@supersanchez1991 the spur gear that would be good for the 24 and 25t is the 55 and 58 spur gear

[GenetiX881]

I bough a TT-01 type e stock i upgraded it with bearings an aluminium drive shaft a ezrun 13t system , the yeah racing conversion kit and that 3 racing graphite chassis i still dont know if im missing anything??

[GenetiX881]

And do you need a cover for those gears or just leave it like that

[GenetiX881]

I bought a tt-01 e and want to buy some spur gears and pinion gears what are good sizes that u could use

[supersanchez1991]

can anybody help me i have a tt01 and i upgrade to brushless motor and also the ESC, i also bought a pinion gear 24/25 t. Item #50477. but they are to big. i dont know if you have upgrade the pinion gear on your car but can you help me out and tell me which ones are the right size,thank you

[decobyrne106]

you should hav got a set of shock towers! reduces the flex the standard 1's have and there lighter and easier to modify!. and a anti roll bar for front and rear. but cool chassis!

pm me if possible and tell me what was inter-changeable from different chassis. and what you would highly recommend.!

[justreal82dj]

i read how "tt" was meant for beginners...now i was lookin to get this car n was wonderin if that is in fact tru.. I wanna be able to do the hop ups n what not n fix this thing up n switch it up wit new bods n what not ya kno? I mean the vids i seen it seems it really aint beginners, i see alotta people fixin these things up...lemme kno please ty

[HAN2929]

stock screws

[SuperHippo17]

what is with all the tt 01s that are ment to be hopped up all this alloy and carbon shit isnt needed i have one all i have done to it was put a 3t brushless set up in it and it is great my would kick ass in a race i have pulled over 50 kms h/r on drift wheels and could you tell me the name of the song and how you made the vid (what program)

[MrKokosFire]

song name plz answer!!!!!!!!!

[4444mongo]

no stock then you got two cars.

[hiitzmike]

why did you not get a schumacher mi4 that would own that at my club (ardent racing)



[007700887]

haha i dont think that still counts as a tt01 :D

[tt01dwifta]

there is stock components on it!!!the gear box covers, knucles, upper and lower arms rear and forward ect ect ect

[ThePlatinumrs]

why would you make the main gear and the motor gear open to dirt? cut a platic box or something and screw it over it

[murcielago1997]

@ThePlatinumrs you don't really need to be protected from the dirt with on road racing. Plus if you clean it every time you run it you don't need to worry. That chassis saves weight if start adding stuff you just ruin the point of the chassis.

[integraxdc2]

whuts wrong with using GPM parts on 3racing tt01s?

[mrd88888]

they are heavy thats why

[Jperezo311]

gay ass song

[fordyrox]

all you need now are the graphite shock towers and yeah racing alloy conversion kit

[ALEXSANHONDA]

nice, engine? ESC? tks

[kiwiRC1]

which is better fiberglass or graphite ??

[fordyrox]

@kiwiRC1 fiberglass can take more flex but graphite is stronger

[340e36]

where can i get a carbon chassis, any where i look it says "discontiniued"

[fordyrox]

@340e36 ebay

[stratmast3r]

get a brushless system!

[infernuse]

where did u get the carbon fiber bathtub?

[infernuse]

sweet!!!

[MrPokegeek212]

you sould get carbon fiber main shaft

[tifr87]

great looking car you should go brushless

[franki0man]

dou you have ball bearings and tuning pinion and spur gears? and wich is the trf part?

[SUPERFORMIAN]

N00B! JUST ABOUT ALL IS TRF!!!!

[olly3663]

Not all of it is TRF at all. I can see the TRF shocks but the rest looks like 3racing chassis kit and some 3racing alloy parts. Hardly any TRF to be seen.

[SUPERFORMIAN]

WADAYA MEAN?!!! I'LL TELL U WAT TRF

[SUPERFORMIAN]

DA DRIVESHAFT, STEERING LINKS,

[SUPERFORMIAN]

HEATSINK!!!!!!!! I'M SURE BAL DIFFS 2

[olly3663]

Tamiya TRF don't do a blue alloy driveshaft or blue alloy heatsink for the TT01. The steering linkage is 3racing or GPM and you can't actually see inside the ball diffs.

I was wrong about the shocks though. Looking at them again they are not TRF as I first thought - they are GPM.

[SUPERFORMIAN]

U R SO FUKING RETARTED!!!!!!! HE SED

[SUPERFORMIAN]

NO GPM! I NO TRF BETTER DEN U!

[SUPERFORMIAN]

I NO MY TAMIYA! U CANT TELL ME WAT IS

[SUPERFORMIAN]

TRF AND WATS NOT WEN IT IS!!!!!!!!!

[SUPERFORMIAN]

they maybe stock diffs but everythin else

[SUPERFORMIAN]

is TRF except carbon fibre

[olly3663]

You do know that Tamiya don't do a TRF version of the TT01 don't you?

And as such there are no TRF TT01 specific parts available to buy.

[SUPERFORMIAN]

I NEVER SED THEY DID A TRF V. OF TT01

[SUPERFORMIAN]

DA SHOX I NO R TRF! plus, who else besides

[SUPERFORMIAN]

da Tamiya Racing Factory gonna make those

[SUPERFORMIAN]

aluminum parts? HUH?!!!!!!!!!!!!!!!!!!

[panhead88]

nice graphite chassis and parts! what motor you running?

[Jhanzen14]

may i know how heavy it is compare to stock tt01?

[SUPERFORMIAN]

heavy? ITS LIGHTER!!

[jwrx7tt01]

what battery do u run?

[lanbel88]

nice car

[locotes187]

nice but, no action tho!!!

[keetoungu]

i will only give chris brown my shit

and the car is a great looking build

[roanyto]

i love this car its my

favorite car real ,

this fantastic !!!

[dutchy2005]

is it okay if i ask about tc-03???

my left steering sucks

i guess it's beacuse of the wheels

[tknv311]

I get the same problem with my hpi sprint 2. If you have had the car apart lately. Fiddle with your ackerman setting. Sometimes it gets messed up during a teardown rebuild.

[dutchy2005]

is it okay if i get some ideas from your video??

[d5iveproductions]

ha ha ha no one can stop anyone from getting ideas

[BradorzBoi]

Nicely done, keep us updated :)

[LilRichards2]

nice car

[udesh123456789]

whats the best brush less motor for dirftin

[Mcintee09]

i bolted the traxxis brushless system i my graphite tt01

[ARZ818]

the novak slyder of course !!

[NewToDis07]

Hey u make a video on how it runs?

[VhRdC]

bad misic

[CalleUnion]

Nice car, music sucks.

[scottcblack]

why no gpm parts? the alloy knucklea and arms are better

[chinkmaster000]

they are strong but heavy

[sharingan180185]

wow u got 3Racing Carbon Chassis already but Kyosho TF-5 Stallion is cheaper than all that tuning parts and its better

[chinkmaster000]

A) I Got the 3racing 'Graphite' Chassis roughly when it came out

B) You can't just say you're 'Kyosho' is cheaper and better (better than what?, at drifting? drag?)

C) You don't even know all the tuning parts i have in that rc car

[acalthu]

Meh it's a tt-01. It's never going to be a "high performance" chassis. I modified mine with nearly every available hopup, even stealing bits from an E kit when applicable. I ended up tossing it because when I received a TA-05 lexus as a gift I was just amazed. I doubt you can even call your car a tt-01 anymore, it barely uses any of the original kit anymore. But seriously, spending that much to make a budget chassis marginally better is just silly.

[boxster260]

well that is true. i just think he could have bought a ta05ms for same amont of money he spent to tuning the tt01 and they is still a lot of plactic onlike the ta05ms but its still a good car

[sharingan180185]

a Kyosho TF-5 costs in ebay less than 200€ Im sure that upgrades in ur TT01 cost more than 200€... you can say wat u want a TT01 is not better than TF-5 Stallion...

[SuperChevy446]

so what isnt the stallion a nitro?

[superbobberd2]

A TT01 and high performance? ha! don't let me laugh

[chinkmaster000]

LETS SEE YOURS then...

oh whats that??? you don't have one

[Mcintee09]

o ya u wanna see a impressive tt01 i only have oil dampers ball bearings n alluminum shaft n differnt eletronics n motor come race me n see wat happens superbobberd chinkmaster u car is pretty sick i no u can kick mine neday wat motor u got in urs

[boxster260]

bad commet a tt01 can be high performace chassis if its tuned up good (i dont think you know much)

[shinigarmour]

i might be getting a tt01 but, how fast are they out of the box?, ive currently got a hpi

[chinkmaster000]

there not too bad out of the box, the standard 540 motor does provide adequete speed, but if want more.. then upgrade

[justinbeiberhascrabs]

@shinigarmour bout 15-20mph so i found out on a 7.2v

[halolord22]

dude what damps u got (i want my chasis all shiny blue to match my heat sink)

[fataldeception]

Those are TRF (Tamiya Racing Factory) Flourine Shocks. Tamiya sell them for $83US - but you can get them much cheaper elsewhere.

[chinkmaster000]

there are tamiya racing factory springs, you can find them on ebay or you local rc shop

[DRIFTking95M]

nice man!

 (how is the song called ?)

[fataldeception]

Dude, it tells you what song it is near the end...

Chris Brown - Gimme That

[r56mini]

The chassis deserves a better painted body, IMO.

[chrisbarnes100]

hey i got a tamiya tt01 brushless and i was wondering were u got the graphite conversion set were from and is is worth it thanks

chris

[chinkmaster000]

the graphite conversion set is from mainly either ebay or 3racing (look on google). When i got it, it cost me about 40GBP, and i felt it was worth every penny, the car feels lighter, more rigid and looks fantastic.

[harjunLFS]

cost? nice work

[Bottenhond]

Whats wrong with GPM parts?

[chinkmaster000]

some are heavy, ugly and are easily broken

basically there unreliable, 3racing and offical tamiya parts are far better.

[Bottenhond]

The tt01 Steering set of a friend of mine looks good, steers bloody fast and is fine...

We had to install a few ball bearings though.

[chinkmaster000]

it looks gd n steers fine.. wait till u accidently hit sumthing like my friend did, the whole steering gear snapped. After i saw that i bought and installed one staight from tamiya. Have a look at the steering set from tamiya its far better in my opinion.

[Bottenhond]

I agree with what you say from the tamiya set... I have it myself on my TT01D, and it steers like a dream, and it's strong. But the friend of mine with the gpm set always drives on a veeeeeeeeeryyy big parking lot, so he never crashes.

[Mcintee09]

ya i agree the from gpm shock tower will break over anything

[Imprezaman555]

can u use the tamiya carbon upper deck with that carbon chassis? I want to get the chassis but I like having the anti roll bars as well.

[chinkmaster000]

I dnt know, been an idea of mine aswell, if the tamiya carbon uppder deck will fit. If i got some money i mite buy and try.

[Imprezaman555]

thx. also do u know a website that has good but inexpensive tires and rims?

[chinkmaster000]

yehh try 3racing (search it on google)

[Imprezaman555]

thx

[Jakey4seasons]

2:05 typo lol

+ where can you get that chassis?

[Mcintee09]

hey dont bash this car stock its not that bad i also jus got mine running but i wanna upgrade tho

[lancer411]

u should really change ur connections from the standerd tamiya to the male/female connections with high performance motors they overheat and melt happened to mine when i first got my tt-01

[smknyan121]

You From Cali...Wanna Race, I gotta TT-01 Same Cmponents I wanna see What the Weight Difference is w/ that!

[chinkmaster000]

nope i aint, im from UK? lol put a video of your tt-01 up

[SkyhunTer0210]

wow men you jus spent all you cash...for that car dude...but anywayx nice car...

[Ichsan22430]

wow that is alot of upgrades, nice! How does it run? Could you make a movie of it?

[chinkmaster000]

yehhh its fastttt... .. yeh there hopefully will be a video on youtube soon. Thanks

[MohHageen]

Hey Chinkmaster can you tell the TRF parts listing you installed on you car?

[chinkmaster000]

the trf parts are mainly just the trf dampers/suspension and the main shaft but thats is really a TB evo 4 lightweight aluminum shaft not the normal one, u can tell cos it has a 'tamiya' logo on it

[MohHageen]

very nice paint job, kamekazee logo, i think you must spent more than $150 on the anodized aluminum parts.

[chinkmaster000]

yeh i must have lol. but it looks nice and adds performance

[dritf4life1994]

nice car!!

what motor are you runing??

[chinkmaster000]

a tamiya RZ superstock 27 turn motor

[dritf4life1994]

nice

[wifey13]

called that high performance?

lol

i dont see a BL system..

and those wires are messy..

[chinkmaster000]

everyone has their own level of high performance, it depends on what you want drag or drifting! if i wanted a proper fast car i would of installed a mamba motor and esc. and what has wires got to do with it? most of those wires you see are for my LED system for my car! and it aint even messy, so you can SHUT THE HELL UP!

[chinkmaster000]

...and furthermore, i bet you don't know jack s**t about what i have installed in my car for that matter,

for the record theres no point in having a car so fast u cant handle!