@androsoko Mine radio was working, but the door speakers and center speaker did not. I have solved the problem by cleaning the AMP and replacing these schemes (PAL007A and PAL001A), now everything is OK. One thing by the way PAL001A was replaced to PAL002A, now the center speaker is a bit louder than usual, or maybe my hearing gone wild :)
@numberonechi Hey, yes I have removed the original ones and soldered in new ones because the connectors had some corrosion. I found some corrosion on the board too, so I have whipped/cleaned it with isopropyl alcohol, had to remove/unsolder and clean the board where the optic cable comes in. Unfortunately I did not make any images of the process. Before the repair the center and the door speakers did not work for me, but the front and back panel speakers worked.
Yes please let me know exactly what you did. No sound works at all from my car.. No turn signals, no radio, nothing. Is this what happend to you? I just dont want to pay 1000 for a new amp1. Thanks for the reply...
@motiongate First find witch amp is not working ! if the amp under the seat dosent work just remove the fiberoptic cable from the back of the amp and buy from the site etadyne.com the bypass adapter and follow the instructions! it is very very easy ! if you wanna help just sent me msg !
@mpevine11 First find witch amp is not working ! if the amp under the seat dosent work just remove the fiberoptic cable from the back of the amp and buy from the site etadyne.com the bypass adapter and follow the instructions! it is very very easy ! if you wanna help just sent me msg !
@androsoko i just had the same problem,after i got the loopback connector, everything works fine and didnt take no time at all.the part was $12 plus shipping that brought it to 20 bucks. way better than $700-1100 for an amp
hey only one side of the car works. would this be the same problem?
kamilpolniak 2 months ago
@kamilpolniak i think its one of the amps failed !
androsoko 2 months ago
Will the speakers that are in the doors work after this bypass?
Medingenas1 6 months ago
@Medingenas1 yes, the only speaker that dosnt work is the center speaker in the dash that is not so important
androsoko 6 months ago
@androsoko Mine radio was working, but the door speakers and center speaker did not. I have solved the problem by cleaning the AMP and replacing these schemes (PAL007A and PAL001A), now everything is OK. One thing by the way PAL001A was replaced to PAL002A, now the center speaker is a bit louder than usual, or maybe my hearing gone wild :)
Medingenas1 6 months ago
@Medingenas1 Did you just remove and solder new PAL007A and PAL002A? What kind of cleaning was done? Was there any sound before this fix?
numberonechi 1 month ago
@numberonechi Hey, yes I have removed the original ones and soldered in new ones because the connectors had some corrosion. I found some corrosion on the board too, so I have whipped/cleaned it with isopropyl alcohol, had to remove/unsolder and clean the board where the optic cable comes in. Unfortunately I did not make any images of the process. Before the repair the center and the door speakers did not work for me, but the front and back panel speakers worked.
Medingenas1 1 month ago
Yes please let me know exactly what you did. No sound works at all from my car.. No turn signals, no radio, nothing. Is this what happend to you? I just dont want to pay 1000 for a new amp1. Thanks for the reply...
motiongate 6 months ago
@motiongate First find witch amp is not working ! if the amp under the seat dosent work just remove the fiberoptic cable from the back of the amp and buy from the site etadyne.com the bypass adapter and follow the instructions! it is very very easy ! if you wanna help just sent me msg !
androsoko 6 months ago
Hello friend, i remove my amp that is under my seat and bypass the fibre-optic cable ! it is very very easy to fix it !
androsoko 11 months ago
i also have no radio currently.........how did you fix this please reply
thank you much!
mpevine11 11 months ago
@mpevine11 First find witch amp is not working ! if the amp under the seat dosent work just remove the fiberoptic cable from the back of the amp and buy from the site etadyne.com the bypass adapter and follow the instructions! it is very very easy ! if you wanna help just sent me msg !
androsoko 6 months ago
@androsoko i just had the same problem,after i got the loopback connector, everything works fine and didnt take no time at all.the part was $12 plus shipping that brought it to 20 bucks. way better than $700-1100 for an amp
djhotrod83 2 months ago