cant wait to have my head milled and get my cummins replacement headgasket and get mine fixed. how much boost is being run in that thing? is the trans built? is he running stock injectors? what kind of fuel plate is in it? has the headgasket been replaced before? if not and you're running around 35 pounds of boost you're right on the edge.
@6030diesel All good questions. The boost can go as high as 40psi with the upgraded turbo. The trans is built and has a high torque torque converter. It has marine injectors. Stock fuel plate moved all way forward. Head gasket is the original amazingly enough!
@edzgarage well at least the original is a good one. mine had some sort of upgraded injectors, then i figured id replace them when i did the headgasket and i put stockers in and they suck! im going to pull out my fuel plate to see if i can make the most of them. what kind of turbo is it? stocker with upgraded compressor wheel and housing? also, does he have a governer spring kit in it to allow it to rev higher? if so which one? sorry for all the questions but im curious as to what is done to it.
@6030diesel I will have to ask my Brother some of these questions since he was the original owner and did all the work. I do know the turbo is not the stock one rebuilt since we have the stock one in a box in the garage lol I will have to check on the governor spring, but I don't think it can over rev though.
@edzgarage oh i just found that video of when your brother was explaining it. if it has a 3000 GSK in it, it will rev to about 3 grand before topping out, if it has a 4000 GSK it will rev well into the redzone before topping out. if he has a 4000 GSK, im sure your brother would have put in the heavier valve springs to keep the valves from floating at those RPMS. still a really nice truck. and after reading comments i cant beleive he got it for a grand! thats a steal!
@edzgarage me too. i spent 1650 on mine and it didnt come with any of those goodies, plus i had to fix a bunch of stuff on it first! and now i blew a headgasket lol. oh well once i get that fixed she'll rip stuff up. you should tell masteroutdoorsman to grind his fuel plate for a little more jam :D
@edzgarage i would love to find a feild i can mess around in but none aval at the monent that i can think of and i think masteroutdoorsman did a fine job :)
I like the hammerhead 250cc liquid cooled, north american made, *canada I believe, fun, cheap*new*, and can do alot of stuff, even a light tow hitch on the back
@edzgarage lol yeaaa, I got my truck at the end of Aug, I did do dry donuts *short field grass*, I dont do it anymore cause its so secluded, if i broke something id be dinked.
So yea, fisrt snowfall came, donuts were much more fun, safer for the truck. but I still rarely ever do it, (new truck and all)
@utuberevlimitracing Good plan! Having your truck brake out in the woods is no fun... been there done that! It is hard to take a new truck and do these things, but once in a while is hard to resist.
That was Spectacular ( "great" for the Rio Linda crowd ) all that snow flying around looked so Cool... I can hear your Son now.. But Officer, my DAD Taught me to drive like that... :-p
humm those Chevy people are here too. lol
masteroutdoorsman 5 months ago
Nice "for a dodge" ahahahahahah nice work
FoxRaceKid37 5 months ago
@FoxRaceKid37 Thanks!
edzgarage 5 months ago
I know that dude got to love the F350 diesils
REDNECKJIMBO1 7 months ago
Like the truck but I'm more of a Chevy man or ford but nice truck
REDNECKJIMBO1 8 months ago
@REDNECKJIMBO1 Thanks for the comment! We also have a Ford F350 in our fleet.
edzgarage 8 months ago
Ill buy it for 1500
dirtr1der12345 10 months ago
@dirtr1der12345 LOL I bet you would! Not for sale...
edzgarage 10 months ago
I love yor sons truck! how much did he pay for it?
exmarkmetroguy 1 year ago
@exmarkmetroguy Thanks! $1k
edzgarage 1 year ago
@edzgarage jezz i guess thats a family deal huh? around here they are around 11,000
exmarkmetroguy 1 year ago
@exmarkmetroguy Yeah, he has a nice Uncle.
edzgarage 1 year ago
I'd do that, but it don't snow in Gulf Coast Texas
SeaDollarsBertram 1 year ago
@SeaDollarsBertram Come on up here, we still have plenty of snow!
edzgarage 1 year ago
LOL looks like alot of fun.
Nutintoitbut2doit 1 year ago
@Nutintoitbut2doit It was! Thanks for the comment!
edzgarage 1 year ago
Wish my dad would donuts with me instead of saying your going to break it or your using to much gas.
2LateIWon 1 year ago
@2LateIWon It was a lot of fun! Maybe some day you'll convince your Dad to let you do it.
edzgarage 1 year ago
crazy kids. Doing lawn jobs on dad's freshly cut grass. Is that the same famous grass that legends cut? lol
Chooman69 1 year ago
@Chooman69 lol yes it is.
edzgarage 1 year ago
@edzgarage lol
Chooman69 1 year ago
@KuntryboyF150 Thanks Buddy! I love the story "I beeped and kept driving" lol I would have too.
edzgarage 1 year ago
Whether its a diesel or a V8, trucks are AWESOME!!
slowride55 1 year ago
@slowride55 I agree!
edzgarage 1 year ago
I cannot believe people downrated this video! WTF? I guess you cannot please everyone in this world.
craig1974 1 year ago
@craig1974 You're right Craig, can't please everyone. I've had a few comments that I didn't approve that don't like Dodge trucks... whatever! lol
edzgarage 1 year ago
Nice !!
1boostup 1 year ago
@1boostup Thanks Buddy!
edzgarage 1 year ago
cant wait to have my head milled and get my cummins replacement headgasket and get mine fixed. how much boost is being run in that thing? is the trans built? is he running stock injectors? what kind of fuel plate is in it? has the headgasket been replaced before? if not and you're running around 35 pounds of boost you're right on the edge.
6030diesel 1 year ago
@6030diesel All good questions. The boost can go as high as 40psi with the upgraded turbo. The trans is built and has a high torque torque converter. It has marine injectors. Stock fuel plate moved all way forward. Head gasket is the original amazingly enough!
edzgarage 1 year ago
@edzgarage well at least the original is a good one. mine had some sort of upgraded injectors, then i figured id replace them when i did the headgasket and i put stockers in and they suck! im going to pull out my fuel plate to see if i can make the most of them. what kind of turbo is it? stocker with upgraded compressor wheel and housing? also, does he have a governer spring kit in it to allow it to rev higher? if so which one? sorry for all the questions but im curious as to what is done to it.
6030diesel 1 year ago
@6030diesel I will have to ask my Brother some of these questions since he was the original owner and did all the work. I do know the turbo is not the stock one rebuilt since we have the stock one in a box in the garage lol I will have to check on the governor spring, but I don't think it can over rev though.
edzgarage 1 year ago
@edzgarage oh i just found that video of when your brother was explaining it. if it has a 3000 GSK in it, it will rev to about 3 grand before topping out, if it has a 4000 GSK it will rev well into the redzone before topping out. if he has a 4000 GSK, im sure your brother would have put in the heavier valve springs to keep the valves from floating at those RPMS. still a really nice truck. and after reading comments i cant beleive he got it for a grand! thats a steal!
6030diesel 1 year ago
@6030diesel Yeah, he did get a good deal. I was jealous! lol
edzgarage 1 year ago
@edzgarage me too. i spent 1650 on mine and it didnt come with any of those goodies, plus i had to fix a bunch of stuff on it first! and now i blew a headgasket lol. oh well once i get that fixed she'll rip stuff up. you should tell masteroutdoorsman to grind his fuel plate for a little more jam :D
6030diesel 1 year ago
@6030diesel dont forget the arp head studs they will clamp it down nice and tight and you shouldnt have to worry about the gasket again :)
Needmorehorsepower 1 year ago
I hope the engine is warm, and not only the cooling water but also the engine oil
djverhulst 1 year ago
@djverhulst It was. We had already been driving for 20 minutes before we did this.
edzgarage 1 year ago
@masteroutdoorsman
(fake) global warming are the words ur looking for lol. Nice ride btw
stlchevy95 1 year ago
theres yer global warming right there
masteroutdoorsman 1 year ago
@masteroutdoorsman LOL
edzgarage 1 year ago
@masteroutdoorsman if they want we could really give em something to b**** about LOL
Needmorehorsepower 1 year ago
that is a blast ed i love it!!!!! :)
Needmorehorsepower 1 year ago
@Needmorehorsepower Thanks Scott! I think you can really show us how it's done.
edzgarage 1 year ago
@edzgarage i would love to find a feild i can mess around in but none aval at the monent that i can think of and i think masteroutdoorsman did a fine job :)
Needmorehorsepower 1 year ago
Nice job with the music, Ed. Love the black smoke.
susanloveshuskies 1 year ago
@susanloveshuskies Thanks Susan! I bet you see lots of black smoke over there lol
edzgarage 1 year ago
Sure is fun drifting! I do it all the time with my F150!
IDIDieselJohn 1 year ago
@IDIDieselJohn It is fun! Thanks for the comment!
edzgarage 1 year ago
I like the hammerhead 250cc liquid cooled, north american made, *canada I believe, fun, cheap*new*, and can do alot of stuff, even a light tow hitch on the back
utuberevlimitracing 1 year ago
Looks like fun!
dirtbike5100 1 year ago
@dirtbike5100 It was!
edzgarage 1 year ago
hell ya!! might as well make some fun outta that not so lovely white stuff haha good vid thumbs up
240sxfirebird 1 year ago
@240sxfirebird lol That's right! Thanks Buddy!
edzgarage 1 year ago
Dodge snow mover
mrbreeze732 1 year ago
@mrbreeze732 lol Yep!
edzgarage 1 year ago
Woot woot that ws fun Ed .
VE9REJ 1 year ago
@VE9REJ Thanks Reg! It sure was fun!
edzgarage 1 year ago
lol I do that in the field at my cottage in a 2010 sierria crew cab, *black-chromed*
utuberevlimitracing 1 year ago
@utuberevlimitracing It is fun isn't it!
edzgarage 1 year ago
@edzgarage lol yeaaa, I got my truck at the end of Aug, I did do dry donuts *short field grass*, I dont do it anymore cause its so secluded, if i broke something id be dinked.
So yea, fisrt snowfall came, donuts were much more fun, safer for the truck. but I still rarely ever do it, (new truck and all)
utuberevlimitracing 1 year ago
@utuberevlimitracing Good plan! Having your truck brake out in the woods is no fun... been there done that! It is hard to take a new truck and do these things, but once in a while is hard to resist.
edzgarage 1 year ago
@edzgarage lol, thats when I decided Im getting a ATV or a decent offroad buggy when the snow melts.
utuberevlimitracing 1 year ago
That was Spectacular ( "great" for the Rio Linda crowd ) all that snow flying around looked so Cool... I can hear your Son now.. But Officer, my DAD Taught me to drive like that... :-p
vidman008 1 year ago
@vidman008 lol Just like the way my Dad taught me!
edzgarage 1 year ago
Pretty cool fun ,never underestimate the power of wheelies and donuts ,hell their fun !
FrankaDith 1 year ago
@FrankaDith It was a lot of fun!
edzgarage 1 year ago
Pretty cool, I so got to get a truck...
IHcubcadet 1 year ago
@IHcubcadet Thanks Buddy!
edzgarage 1 year ago
fwd donut ftw lol. Doing some Ken block driving in a big truck :)
tom58c 1 year ago
@tom58c It was a lot of fun! Thanks Tom
edzgarage 1 year ago
guitars and donuts .
cant beat that :)
500passwords 1 year ago
@500passwords LOL I agree!
edzgarage 1 year ago
Too much fun guys, I do like your intro!
Have a goodun'
D-Ray
draywanda 1 year ago
@draywanda Thanks a lot! We did have fun.
edzgarage 1 year ago
You look like your having way too fun there bud.....Now where's my coffee??.....to go with the donuts.....Great vid man. Keep em comin'
teeltimes 1 year ago
@teeltimes lol I'll have the coffee ready next time! Thanks Ron!
edzgarage 1 year ago
Donuts!! I'll take a dozen!! Great intro Buddy!!☺
805ROADKING 1 year ago
@805ROADKING lol I'll work on that order! Thanks Buddy!
edzgarage 1 year ago
Who was playing the guitar?
RockinGuy1994 1 year ago
@RockinGuy1994 Me!
edzgarage 1 year ago
@edzgarage Awesome job! You should post more vids playing the guitar.
RockinGuy1994 1 year ago
@RockinGuy1994 Hey thanks a lot! I have a few other songs in some vids on my channel.
edzgarage 1 year ago
@edzgarage I'll go take a look.
RockinGuy1994 1 year ago
The new opening was great!
RockinGuy1994 1 year ago
@RockinGuy1994 Thanks Buddy!
edzgarage 1 year ago
what kind of CB does your son have
vmxrm85 1 year ago
@vmxrm85 The CB is a an original Cobra 148GT. It's one of my old CB's from 25 years ago that I gave him.
edzgarage 1 year ago
@edzgarage cool, thanks for the information
vmxrm85 1 year ago
I LOVE the intro Ed!! Very well put together!
Now, that is a cold...COLD diesel engine right there...LOL!
Who the hell needs a snow mobile?? That looked like more fun! Plus, your warmer inside! :)
Great vid Ed!!
mbyr31 1 year ago
@mbyr31 Thanks Matt! We had a good old redneck time out in the yard!
edzgarage 1 year ago
@mbyr31 Thanks Matt! We had a good old redneck time out in the yard!
edzgarage 1 year ago
you should try the idi in the snow
tanksor 1 year ago
@tanksor lol that truck gets stuck on dry dirt!
edzgarage 1 year ago
@edzgarage that sucks
tanksor 1 year ago
@tanksor It really does!
edzgarage 1 year ago
@edzgarage that would have been cool to seen
tanksor 1 year ago
@tanksor The other problem is the truck needs an injector pump, so it doesn't run right now.
edzgarage 1 year ago
@edzgarage that sucks and me and a friend is going to look at a ford diesel soon that i may be buying
tanksor 1 year ago
@tanksor Good luck, I hope it works out.
edzgarage 1 year ago
@edzgarage yeah
tanksor 1 year ago
YEEE HAW!!!! Gotta love Winter wheelin!
CDNBadass 1 year ago
@CDNBadass YEEE HAW!!!! That's right!
edzgarage 1 year ago
You should of had it in 2 wheel drive. I like the Intro.
GarrettJDB 1 year ago
@GarrettJDB Thanks Garrett! The truck wouldn't get going in two wheel drive... we tried.
edzgarage 1 year ago
The new intro looks great. Nice drifting as well. Now you need to get that BMW out there and show him hows its done lol
ShawnCFarm 1 year ago
@ShawnCFarm Thanks Shawn! I don't think the Beemer would even get going on that snow lol
edzgarage 1 year ago