well they are over rated over priced shit of a computer,dell on crack what i built for what they wanted for one lets just say i got triple what they offered in a system for way less money.and my comment surely didnt have anything to do with suggesting anything from dell/alienware id never buy it.the point to by the way if u cant read was boasting to buy a 800d!know what that is??????
am i looking at a alienware wana be ? yup go get u a 800d and spend that lil extra for a quality case to me that has shit ole colored wire inside just throws off everything!
@samfischer111 hey sam, sorry if i came off the wrong way thanks for the response,ill try to be nicer next time if it works for u it works for me but it does seem to copy a alienware case with the active cooling,and just my thoughts all the fan wires that have to be connected in my opinion should be black and not multi colored that is the one thing thing that stops me from purchasing a case. ty for responding i have a video and some pics of my two systems check them out on my nervoustwitch77
@ToKiiNz it is runs battlefield 3 on high settings no problem i plan on upgrading but don't have the cash between school and only working part time as a server cant afford nothing i really want yet
I wasn't able to tell from the video, but does this case use USB 3 pass through cables or does it have the internal 20-pin Motherboard connector? Thank.
Hey I just got this tower and I had a question... Is there something I need to plug in to make the fans run off the switches on the I/O front panel? I have 1 plugged into A1 and 1 in A2 and the same for B1 and B2. Problem is the fans aren't spinning up. Is there a plug (molex?) that I should have plugged in to have them all running off the switch?
@PlaneswalkerVoid no all i have is the front and the one in front of the psu on the bottom attached to a1 &2 and the back, top and, side fan setup up on B1&2 umm make sure your i/o panel is plugged in the right spot on your mobo in the F_Panel it should say right on the mobo itself and the cable for the I/O plate should be labeled as well
@samfischer111 Turns out my case actually came with the reset button broken on the front I/O panel. The tiny reset switch is permanently pressed in/physically broken. It came that way from Newegg. BUT now I've got my computer up and running and its a fantastic case. Keeps everything nice and chilly and does a fair job at keeping dust out. Just have to keep the reset switch unplugged on the MOBO. :)
hey, just ordered one, but i am going to install a corsair h60 in it and wanted to know if a 120mm fan would fit in the back instead of the 140mm fan?
@superfish7 it really is a nice case if you want good airflow and cable management this is good choice and it will fit probably every board and video card you throw at it its very spacey inside
i just saw a review for the aerocool xpredator and it looks just like this
glusquirt 2 weeks ago
with the fan on the side panel how tall of a cooler can fit in the case
glusquirt 1 month ago
Christ get a tripod.
vkrische 1 month ago
well they are over rated over priced shit of a computer,dell on crack what i built for what they wanted for one lets just say i got triple what they offered in a system for way less money.and my comment surely didnt have anything to do with suggesting anything from dell/alienware id never buy it.the point to by the way if u cant read was boasting to buy a 800d!know what that is??????
nervoustwitch77 1 month ago
am i looking at a alienware wana be ? yup go get u a 800d and spend that lil extra for a quality case to me that has shit ole colored wire inside just throws off everything!
nervoustwitch77 1 month ago
@nervoustwitch77 this case seems to be working fine for me keeps my stuff cool for now until i upgrade and the wires work for me
samfischer111 1 month ago
@samfischer111 hey sam, sorry if i came off the wrong way thanks for the response,ill try to be nicer next time if it works for u it works for me but it does seem to copy a alienware case with the active cooling,and just my thoughts all the fan wires that have to be connected in my opinion should be black and not multi colored that is the one thing thing that stops me from purchasing a case. ty for responding i have a video and some pics of my two systems check them out on my nervoustwitch77
nervoustwitch77 1 month ago
@nervoustwitch77 more pic on face book under david braswell if you want to, would be nice to here some thoughts anyways.
nervoustwitch77 1 month ago
@nervoustwitch77 lol you act as if alienwares aren't completely overrated/overpriced PCs
randomblueman88 1 month ago
@nervoustwitch77 800d and 650d are great looking cases.. I would get one but for me, they dont have enough airflow
Syrius187 1 month ago
@nervoustwitch77 NZXT is more alienware looking. Rosewill has a lot of crappy looking cases lol.
Kulopto 2 days ago
real nice case i;ll order it now. Your setup seems low end for this build but hey your still will stay nice and cool
ToKiiNz 2 months ago
@ToKiiNz it is runs battlefield 3 on high settings no problem i plan on upgrading but don't have the cash between school and only working part time as a server cant afford nothing i really want yet
samfischer111 1 month ago
I wasn't able to tell from the video, but does this case use USB 3 pass through cables or does it have the internal 20-pin Motherboard connector? Thank.
reconJeff 2 months ago
@reconJeff internal 20-pin connector
samfischer111 1 month ago
Cool unboxing but you need better lighting dude
neflinger 2 months ago
Hey I just got this tower and I had a question... Is there something I need to plug in to make the fans run off the switches on the I/O front panel? I have 1 plugged into A1 and 1 in A2 and the same for B1 and B2. Problem is the fans aren't spinning up. Is there a plug (molex?) that I should have plugged in to have them all running off the switch?
PlaneswalkerVoid 2 months ago
@PlaneswalkerVoid no all i have is the front and the one in front of the psu on the bottom attached to a1 &2 and the back, top and, side fan setup up on B1&2 umm make sure your i/o panel is plugged in the right spot on your mobo in the F_Panel it should say right on the mobo itself and the cable for the I/O plate should be labeled as well
samfischer111 2 months ago
@samfischer111 Turns out my case actually came with the reset button broken on the front I/O panel. The tiny reset switch is permanently pressed in/physically broken. It came that way from Newegg. BUT now I've got my computer up and running and its a fantastic case. Keeps everything nice and chilly and does a fair job at keeping dust out. Just have to keep the reset switch unplugged on the MOBO. :)
PlaneswalkerVoid 1 month ago
Haha I had no idea there was a hidden LED switch on the front. Thanks for the tip!
champj21 2 months ago 2
Thanks man, came in today and the case is a BEAST!
Soundarcher 2 months ago 2
hey, just ordered one, but i am going to install a corsair h60 in it and wanted to know if a 120mm fan would fit in the back instead of the 140mm fan?
Soundarcher 3 months ago
@Soundarcher yes there are holes for screws for a 120 fan if need be i think they did that on purpose for that reason
samfischer111 3 months ago
You got shit on your sock 4:09
jonesboyy93 3 months ago
@jonesboyy93 no its gold or bronze arrows its on both if you look closely
samfischer111 3 months ago
Just ordered mined, but my setup is alot bigger.
Hopefully it will keep it cool
superfish7 3 months ago
@superfish7 it really is a nice case if you want good airflow and cable management this is good choice and it will fit probably every board and video card you throw at it its very spacey inside
samfischer111 3 months ago