It took me a few hours and I had to watch several similar videos, but I was able to finally make my Palm Pre Plus (ATT) to work. However, the tethering did not work through USB cable., but it worked fine on wi-fi. Go figure... Thank you for posting.
ummm.. i went 2 the website and founded the update, well, not exactly, it said it has been removed and updated elsewhere, do u know where'd it went??????? pls tell me u noe!!!!!!!!!!!!!!!!!!!!
I know this is prolly off topic or whatever but i got this damn virtual keyboard and i cant make it go in to landscape mode which is really the only reason i wanted it in the first place....is there anyway you can help me out...
so everything worked until I got to install... now its been "connecting to device" for about 30 mins and it won't close... am I supposed to put it into USB mode cause its still on just charge...help! :(
Hello Sir! Do you have any idea where I can get webos quick install 2.5 or 2.7? I have downloaded 3.0 and I can't load a theme. I get an "can not connect to URL" Error! Thanks
Hey i have the palm pre plus from VERIZON. I have noticed in most hacks/jailbreaks for the palm pre that there not verizon phones. and i was just wondering if it would work for palm pre PLUS from VERIZON (key differences) thanks
hey, i got a palm pre plus with 1.4.1.1 update an i downloaded the websquickinstall and i connect my pre to the computer in the just charge mode and when i click on the down blue errow its says "No Device Detected - Please Connect Your Device Then Hit Okay" i connected and then i got "ERROR: No Device Detected" so is there anything can do to make this work??
hey, i got a palm pre plus with 1.4.1.1 update an i downloaded the websquickinstall and i connect my pre to the computer in the just charge mode and when i click on the down blue errow its says "No Device Detected - Please Connect Your Device Then Hit Okay" i connected and then i got "ERROR: No Device Detected" so is there anything can do to make this work??
@diegurke123 non of you guys know that you have to ENABLE the develpoer mode. ok i will help you all, before you start using the webos , because it's gonna give u the error, go on your phone, main screen, start typing upupdowndownleftrightleftrightbastart exactly as shown in quotes (no spaces and no quotes). it will bring a menus , enable it, then restart it, now you should be able to use it.
@diegurke123 non of you guys know that you have to ENABLE the develpoer mode. ok i will help you all, before you start using the webos , because it's gonna give u the error, go on your phone, main screen, start typing upupdowndownleftrightleftrightbastart exactly as shown in quotes (no spaces and no quotes). it will bring a menus , enable it, then restart it, now you should be able to use it.
@diegurke123 non of you guys know that you have to ENABLE the develpoer mode. ok i will help you all, before you start using the webos , because it's gonna give u the error, go on your phone, main screen, start typing upupdowndownleftrightleftrightbastart exactly as shown in quotes (no spaces and no quotes). it will bring a menus , enable it, then restart it, now you should be able to use it.
just got the palm having trouble getting (unzippin) the webOS is there anyone that can send me the files un zipped ??? in a jam here joshlopez6@msn.C OM
when i click on tweaksit says that tweaking requires GNU patch and lsdiff to function and asks me if i want to install it. i click on yes nd then ok to install it but nothing happens. how do you install it?
@tandersonx2 mine says the same thing! i put that code thing in to turn on developer mode, and like when i go to tweaks it says "please connect your device then hit okay, so i click okay, then it says "ERROR" no device connected? idk what too do
I keep getting a message that says "Insert the disk that came with your Palm Novacom Windows could not find the driver software for your device I don't know what to do just got my Pre today and was lookin forward to some home brews please help me
Hey man i cannot do this. I want the precorder on my pre but i can't do what you are talking about. could you email me the steps to download this sofware. peace man and i need help bad.
i downloaded it and it says if i want to download the webosdoctor i did already and it keeps asking me the same thing what do i do they are in the same folder! help plz
dude it says ----- the windows installer service could not be accessed. this can occur if you are running windows in safe mode or if the windows installer is not correctly installed. ------- so please help dude i wana get this working so i can activate quick install thanx, cheers/
hey dude its amsterdaymsky again, i saw your how to install novacom video on here, in the programs it dosnt even show novacom, the problem is somthing is blocking it from installn at all and that is the cause of me not being able to activate the quickinstall proprly, so if you can help please feel free/ thanx dude/
dude i need ur help, i like ur videos and u seem really smart dude/ iam tryn to install apps and the keyboard from quick install but it keeps sayn no divice detektd/ now i have dev mode on and my pre is on charge from the usb and all that but my computer wont let me
install the novacom thing after clicking on options so i think thats why it wont let me, and keeps saying no divice det because no matter what i do the novacom wont install so please help me out dude, i dont get on here much but if u can please text my cell if u will help 4802037253 iam amsterdaym sky that trance remixa London style, thanks and God bless/
@PalmPreReviewer Hey please help me out I keep clicking on re-install novacom and nothing happens. NOTHING. its the most annoying thing in the world.. WebOS has NO IDEA my phone is connected to it.. and then after that I can't even find the package manager to download onto my palm plus even if it would connect... So I have two problems left.. anything you got thank you.
okkayyy i keep trying to connect and it keeps tellin me there is no device.. dO i have tO dO sOmething on my phOne tO cOnnect it? cause its not my cOrd
well listen i do believe you that it works but am losing my patience with this i've trying for a week to install a preware and or a keyboard to my palm pre AND I CANT SO PLEASE TO ALL YOU OUT THERE CAN U PLEASE HELP PLEASE AM SERIOUS...PLEASE HELP
@SophieClarkeDotCom@diegurke123 non of you guys know that you have to ENABLE the develpoer mode. ok i will help you all, before you start using the webos , because it's gonna give u the error, go on your phone, main screen, start typing upupdowndownleftrightleftrightbastart exactly as shown in quotes (no spaces and no quotes). it will bring a menus , enable it, then restart it, now you should be able to use it.
Does this work for the pixi plus
tecnologyreviews 3 months ago
What the hell when I open it with java it just opens up as a stupid bat file like WTH help
KFH2DaFang 6 months ago
To all those having a connection problem you must have DevMode enabled.
This can be done on your device by typing "upupdowndownleftrightleftrightbastart", opening the DeveloperMode app, and enabling the feature.
wgoldingful 9 months ago
It took me a few hours and I had to watch several similar videos, but I was able to finally make my Palm Pre Plus (ATT) to work. However, the tethering did not work through USB cable., but it worked fine on wi-fi. Go figure... Thank you for posting.
veroandariega 11 months ago
WHY DOESN"T WEB OS EVER DOWNLOAD?? i click it every god damn time and nothing happens. why does this have to be so fucking hard. i hate computers.
mattgutt010 11 months ago
ummm.. i went 2 the website and founded the update, well, not exactly, it said it has been removed and updated elsewhere, do u know where'd it went??????? pls tell me u noe!!!!!!!!!!!!!!!!!!!!
dwinx5 1 year ago
This has been flagged as spam show
for more games n apps.visit @ fuzzypalm.blogspot.com
bravoast 1 year ago
I know this is prolly off topic or whatever but i got this damn virtual keyboard and i cant make it go in to landscape mode which is really the only reason i wanted it in the first place....is there anyway you can help me out...
4EvaKrunk302 1 year ago
hey bro i need help mines says cannot connect to package feed
stitchie22 1 year ago
This has been flagged as spam show
cant see pacakge manager why???? or what can i do???
can anybody help me
haydeejor14 1 year ago
so everything worked until I got to install... now its been "connecting to device" for about 30 mins and it won't close... am I supposed to put it into USB mode cause its still on just charge...help! :(
CyniaCBeeBee91 1 year ago
does this work for plam pre plus att?
cageness 1 year ago
Hello Sir! Do you have any idea where I can get webos quick install 2.5 or 2.7? I have downloaded 3.0 and I can't load a theme. I get an "can not connect to URL" Error! Thanks
rshort15531 1 year ago
Hey i have the palm pre plus from VERIZON. I have noticed in most hacks/jailbreaks for the palm pre that there not verizon phones. and i was just wondering if it would work for palm pre PLUS from VERIZON (key differences) thanks
Corrupt3dUtubePage 1 year ago
@Corrupt3dUtubePage I believe it will work just when you download WebOSDoctor put the carrier as verizon and the device as palm pre.
carterlee12 1 year ago
what does this do for the palm pre/pixi phone
TJRIDeMoN 1 year ago
It Is All Fine Untill Webos Kums Up &I Press The Green Arrow &NOTHING HAPPENS.... HELP ! :)
allexsandra21 1 year ago
ya mine does that too. I don't know what to do. :(
tandersonx2 1 year ago
hey, i got a palm pre plus with 1.4.1.1 update an i downloaded the websquickinstall and i connect my pre to the computer in the just charge mode and when i click on the down blue errow its says "No Device Detected - Please Connect Your Device Then Hit Okay" i connected and then i got "ERROR: No Device Detected" so is there anything can do to make this work??
woodtown503 1 year ago
hey, i got a palm pre plus with 1.4.1.1 update an i downloaded the websquickinstall and i connect my pre to the computer in the just charge mode and when i click on the down blue errow its says "No Device Detected - Please Connect Your Device Then Hit Okay" i connected and then i got "ERROR: No Device Detected" so is there anything can do to make this work??
woodtown503 1 year ago
:( wont work it just pops up a freaking run window and the gets errors then quits.
sonick133 1 year ago
ok well i did all that and i dont see the package thing wont show up on my phone ... i see preware but ill open it it wont work says error
lorenzo90221 1 year ago
This has been flagged as spam show
@diegurke123 non of you guys know that you have to ENABLE the develpoer mode. ok i will help you all, before you start using the webos , because it's gonna give u the error, go on your phone, main screen, start typing upupdowndownleftrightleftrightbastart exactly as shown in quotes (no spaces and no quotes). it will bring a menus , enable it, then restart it, now you should be able to use it.
Enjoy
yaz90jordan 1 year ago
This has been flagged as spam show
@diegurke123 non of you guys know that you have to ENABLE the develpoer mode. ok i will help you all, before you start using the webos , because it's gonna give u the error, go on your phone, main screen, start typing upupdowndownleftrightleftrightbastart exactly as shown in quotes (no spaces and no quotes). it will bring a menus , enable it, then restart it, now you should be able to use it.
Enjoy
yaz90jordan 1 year ago
I can not install anything ... he always says error no device detected.
what is wrong? please help, thank you
diegurke123 1 year ago
@diegurke123 non of you guys know that you have to ENABLE the develpoer mode. ok i will help you all, before you start using the webos , because it's gonna give u the error, go on your phone, main screen, start typing upupdowndownleftrightleftrightbastart exactly as shown in quotes (no spaces and no quotes). it will bring a menus , enable it, then restart it, now you should be able to use it.
Enjoy
yaz90jordan 1 year ago
just got the palm having trouble getting (unzippin) the webOS is there anyone that can send me the files un zipped ??? in a jam here joshlopez6@msn.C OM
joshlopez6 1 year ago
if your getting the ERROR no device connected message, make sure you did all of the following:
1. have your palm pre connected to the computer
2. have turned on developer mode
3. have installed webosdoctor
4.have installed novacom
if you've done these things you should be set to go
LinkRACS 1 year ago
when i click on tweaksit says that tweaking requires GNU patch and lsdiff to function and asks me if i want to install it. i click on yes nd then ok to install it but nothing happens. how do you install it?
LinkRACS 1 year ago
how do i get this to work on a mac
ebenone 1 year ago
They're currently at v3.02
TheRealZen00 1 year ago
my phone keeps saying "ERROR" no device connected, how do u fix that????
tandersonx2 2 years ago
@tandersonx2 mine says the same thing! i put that code thing in to turn on developer mode, and like when i go to tweaks it says "please connect your device then hit okay, so i click okay, then it says "ERROR" no device connected? idk what too do
ericmmontes 2 years ago
This has been flagged as spam show
Join Date: Feb 2010
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
--------------------------------------------------------------------------------
I keep getting a message that says "Insert the disk that came with your Palm Novacom Windows could not find the driver software for your device I don't know what to do just got my Pre today and was lookin forward to some home brews please help me
michaelmurray2006 2 years ago
does this void the warante
gorrilaman8 2 years ago
HEY i tried installing preware/ the icon appeared on mi phone but then when itried to open it it said "the package manager service is not running"
what is the package manager? i uninstalled and reinstalled novacomd on mi comp and rebooted my phone but nothin =[[
help!
geo2leo 2 years ago
you have an lttle head xD
dima1997 2 years ago
you look like an alien O.o
TheRedspider2a 2 years ago
this is for phone huh??
darren414178 2 years ago
i can't do nothing. they show me a error:cannot property 'length' undefined...how can i fix this? can someone help me in this?
jagger222 2 years ago
It Keeps Telling Me That ERROR: No Device Detective, Can You Help Me Out Please.
XxLost21xX 2 years ago 2
SAME HERE!!!!
YaBoyKhalilTv 2 years ago
@XxLost21xX You have to put your phone in DEV mode. Just open your keyboard and type
without the quotes "upupdowndownleftrightleftrightbastart"
mrmagoo662 2 years ago
Hey man i cannot do this. I want the precorder on my pre but i can't do what you are talking about. could you email me the steps to download this sofware. peace man and i need help bad.
hempliker 2 years ago
why doesnt novacom work? it say make sure novacom exists?
whytelace217 2 years ago
i downloaded it and it says if i want to download the webosdoctor i did already and it keeps asking me the same thing what do i do they are in the same folder! help plz
ChellynWilly 2 years ago
i have a mac and when i click "download here" it doesn't open the link it just takes me to a bank page, any suggestions? i'm doing it on safari.
garrettdini 2 years ago
dude it says ----- the windows installer service could not be accessed. this can occur if you are running windows in safe mode or if the windows installer is not correctly installed. ------- so please help dude i wana get this working so i can activate quick install thanx, cheers/
amsterdaymsky 2 years ago
hey dude its amsterdaymsky again, i saw your how to install novacom video on here, in the programs it dosnt even show novacom, the problem is somthing is blocking it from installn at all and that is the cause of me not being able to activate the quickinstall proprly, so if you can help please feel free/ thanx dude/
amsterdaymsky 2 years ago
dude i need ur help, i like ur videos and u seem really smart dude/ iam tryn to install apps and the keyboard from quick install but it keeps sayn no divice detektd/ now i have dev mode on and my pre is on charge from the usb and all that but my computer wont let me
amsterdaymsky 2 years ago
install the novacom thing after clicking on options so i think thats why it wont let me, and keeps saying no divice det because no matter what i do the novacom wont install so please help me out dude, i dont get on here much but if u can please text my cell if u will help 4802037253 iam amsterdaym sky that trance remixa London style, thanks and God bless/
amsterdaymsky 2 years ago
o.0 it keeps tellin me NO DEVICE CONECTED 0.o is pissing me off =(
reffamilia 2 years ago
maybe u have windows 7, is not compatible
NudoxFan 2 years ago
i got windows XP bro =/
reffamilia 2 years ago
you have to enable developer moder
PalmPreReviewer has a Vieo for this too
Murphy9904 2 years ago
yeah thanks man I got it after playing around with it and thaks for getting back
pardeepranadey 2 years ago
Mine says that no device found
pardeepranadey 2 years ago 2
You need to install novacom. To do so go to websquickinstall and go to file, options and click (re)installation Novacom
PalmPreReviewer 2 years ago 3
i do that and it dosent work
JessicaA39 2 years ago
i reinstall novacom and the same thing pops up
JessicaA39 2 years ago
@PalmPreReviewer Hey please help me out I keep clicking on re-install novacom and nothing happens. NOTHING. its the most annoying thing in the world.. WebOS has NO IDEA my phone is connected to it.. and then after that I can't even find the package manager to download onto my palm plus even if it would connect... So I have two problems left.. anything you got thank you.
mattgutt010 11 months ago
okkayyy i keep trying to connect and it keeps tellin me there is no device.. dO i have tO dO sOmething on my phOne tO cOnnect it? cause its not my cOrd
kimikoj 2 years ago
well listen i do believe you that it works but am losing my patience with this i've trying for a week to install a preware and or a keyboard to my palm pre AND I CANT SO PLEASE TO ALL YOU OUT THERE CAN U PLEASE HELP PLEASE AM SERIOUS...PLEASE HELP
lonelycm 2 years ago
Well what problem are you running into?
PalmPreReviewer 2 years ago
@PalmPreReviewer every time i try install it it says error ''/
HELP !!
SophieClarkeDotCom 1 year ago
@SophieClarkeDotCom @diegurke123 non of you guys know that you have to ENABLE the develpoer mode. ok i will help you all, before you start using the webos , because it's gonna give u the error, go on your phone, main screen, start typing upupdowndownleftrightleftrightbastart exactly as shown in quotes (no spaces and no quotes). it will bring a menus , enable it, then restart it, now you should be able to use it.
Enjoy
yaz90jordan 1 year ago
@yaz90jordan
Thanks for your help.
diegurke123 1 year ago
@lonelycm did you ever get this problem to go away? I'm having the same trouble.
JesseJMira 1 year ago
thanks so much your the best!!!!!!!
Vi11in 2 years ago
cool .... where is the link?????
jujin918 2 years ago
you forgot to put the link in the description
gregorym93 2 years ago
nice PiP
MultiMediaWill 2 years ago