Added: 5 years ago
From: Idz21
Views: 40,341
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (158)

Sign In or Sign Up now to post a comment!
  • BMW < 5 spd < 4 wheels drive < 3 diamonds < 2 liter < 1 turbo <DSM

    im running on 25lb of boost on big 16g turbo stock intercooler 650 injectors 3'' straight pipe exhaust , and i can start from the dig with an m5 which is V10 5 L and on 1/4 mile i would win , but for longer run ofc no matter what eclipse is no match for m5. Fact is that M5.M3.M6 are overpriced pice of junk if 5000$ car can beat the shit out of it. Even if i ble the motor it will cost me just around 900$ to get new one .......

  • delighted the engine blew up that m3 would have blew you off the road if he decided to race but he obviously knows that abusing a car usually ends up in what you have on your driveway

  • poor engine

    

  • Nice coke nail dude...

  • Comment removed

  • Must be a coke fiend.

  • @lolrajatime1 Do you know how much an e46 m3 weighs? Even with 333 bhp, that car only runs in the 13's in the 1/4 mile, not to mention that it's overpriced, a pain in the ASS to maintain, and it looks like a fat pudgy kid got his face flattened by a fist.

  • *similar

  • Why do u guys keep calling the M3 "slow"??? 333HP sports car is slow hmmm yall must drive ZR1 Vettes and GTR's and don't tell me how u drive a blah blah blah with a rubuilt motor pushing yadda yadaa I've heard it all M3 has 100+ HP on this car and fairly simily weight he was deff not racing enuff said

  • Learn to use a boost controller, fucktard

  • Comment removed

  • what the fuck did this kid do, this doesn't just happen

  • @XxPointMan612xX

    He was racing a BMW M3 and he launched at redline and slammed the gears. Too much stress on the motor i am guessing.

  • Turbo your lawn mower you will have better results

  • @pontiacpanic79

    look it up, its been done. lol.

  • I never understood why people throw money at these piece of shyt cars, they are notorious for crank-walk.

  • just trying to give that crank some exercise... a nice walk will do =) they shoulda built before race. everyone knows the 2g 4g's are most susceptible. 2ga to be more specific =) oh well though, they learned themselves a valuable 2 or 3 thousand dollar lesson

  • m3 suck huh!! HAHA Its funny how imports always think this about m3's. But take a turbo m3 and your car will not stand a chance.

  • thats what happens when you cant drive

  • He should have checked his oil that day...I do on mine daily

  • lol !!! is that your engine ? o hh my god!! lol does what happens when you try to out run a bimmer...

  • it is clear these retards have no idea what they are doin haha

  • 4G63 FAIL!!!!

  • That's a nasty fucking pinky nail, cut that shit off bro.

  • lmao hahah

  • damm what a waste of money.

  • The BMW M3 (manufactured out of it's own special //M Plant) is so slow, yet it stays together after one race. Try calling BMW for some high quality replacement parts, that won't fail like a power wheel. ///M Power

  • haha ahha ahaha

  • There is nothing more fantastic than watching an idiot blow up his car after talking so much shit...

    lmfao!!!

  • Dude how much coke do you do man? WIth a pinkie nail like that you must be scooping and sniffing all day lol

  • Yeah thats why all he can afford is the pos eclipse instead of an m3

  • DSM > BMW

  • hope u die for when u go eat after working and not wear gloves and eat chemicals hhaha and metal u stupid. Or u could live and wash your hands lol

  • u stupid? man seriously hoping somone dies means YOUR stupid.

  • wouldn't have this problem with an sr20!

  • with its plastic rods the sr20 would have blown up at the light

  • lol sr20's push 350 on a stock bottom end so no

  • 350 DANG!!!! (that was sarcasm)

  • this is just from experience :) not from what ive "read"

  • I, from experience, would on a daily basis run 23psi (spiking 28, and that wasnt my race gas tune) on a e316g on a completely stock 7-bolt 4g63 with cams and all other supporting mods, i was easily making high 390AWHP, there is a guy about 100 miles from here trapping 138 mph on COMPLETELY STOCK 6-bolt4g63(you do the math)......

  • thats pretty poor considering a 350hp sr20det in a heavier car does 175mph. from experience of course :) and running street gas... haha...shitty dsms i tell ya, just look at this video LOL

  • You obviously dont know what im talking about, when i say "trap" 140mph, i mean he hits 140mph by the time he finish a pass in the 1/4mile, he ran a 10.0 at 140mph, on a stock block, dont ever compare your overrated sr20(i would rather build a KA24 then the sr20) to the king of 4-cylinders the 4g63

  • just know that the fastest/quickest 4-cylinder in the world, the highest hp 4-cylinder in the world, the fastest MODIFIED car in the world, the fastest 3/4 chassis in the world, the fastest AWD car in the world, all run

    4g63's.

  • must be why it blows up like in this video eh

  • yeah it must be, just imagine how easily sr20's blow up, there stock and they throw rods threw the block like nothing

  • OMFG!!!

  • That motor takes after its owner... weeak...

  • whoopsies

  • 7 bolt ftl. damn coke head

  • Comment removed

  • You are a fucking moron. The poor mitsu was murdered because of a lack of thrust bearings on the crank that when put under the stress of a high lb pressure plate it makes the crank WALK. Everyone responds to car videos but RARELY does anyone know what the fuck they're even talking about. I hate you all.

  • excuses for your gay four banger piece of shit

  • hahaha cant be straight up enough...

  • what a dumbass dont work on cars at all if all you gonna do is fuck it up

  • Hey faggot, cut that fingernail.

  • That dam Fingernail!!

  • that wasnt an act of poor design, just and act of stupidity

  • hahaha....ricer

  • thats wat you get trying to race a BMW you dumb shits.

  • ya u blew your engine but look at that pinky nail!

  • Yeah, that particular nail is probably used to shovel crack directly into his nose...

  • hope he never gets another GSX stick with a honda!

  • not my vid retards lol.

  • nice crack nail.....

  • wow people and there "beamers" they arent affordable even if they do if they dont have a warranty your fked on something if you break it.. the 4g63 is a legendary engine enough said.

  • oh yeah? my BIMMER has V-tec hahahaha.

  • lmao! conecting rod made of recyle aluminum or what hahaha! thats why i drive a bimmer, well designed engines that will last.

  • 4g63 do last but like everyone knows most of the 7 bolts in the 2g they have crank walk and other problems the 4g63 is by the best 4 cylinder platform to build on...

  • i mean yeah they are pretty quick and what not, i like the design which is pretty simple but i've seen my budie go through 2 4g63s both runing about high 13s low 14s which is not bad for minor modifications but eh.. threw a rod on one and warped head on the other = [

  • yea... and why are you laughing when you say your bimmer has v-tec? BMW does have a different type of variable valve timing... its just not called v-tec..

  • it was just a joke man. yeah they do and its called a VANOS UNIT. M3 have 2 Vanos units, one for intake and the other for exhaust. does the same job ad V-tec but works a bit different.

  • exactly my point

  • yeah.......boost can be ur friend or ur worst enemy, looks like u made enemys with yours. those stock 2g rods can't hold power for shit. weather it was to much boost or bad tuning over a period of time, those rods finally had enough beating on. i saw the racing vid to this one about 3 years ago so this old. i just hope the guy did a proper rebuild.

  • DEAR LORD!!!

    TELL HIM TO CUT HIS PINKY NAIL!!!!

    Man Alive.

    Is he trying to grow his pinky nail or what?

    00:15

  • what a dumb bitch , that is a piston boss, it hold the conecting rod to the piston.... dumbass. by the look of the arrow on top of the piston.. looks like stock internals.. what a dumb SOB.

  • hahaha, the camera guy (passenger during the "race") doesn't know a single thing about cars. he like "and this is a... um..." hopefully the owner isn't getting help rebuilding it from the camera man.

    on another note: man that sucks dude... good luck with the rebuild. atleast now ur forced to add some go-fast components

  • Dood that fuckin sucks, it will cost thousands to fix!!

  • eclips's are nice cars but you gatta know what your doin with them b4 you up the shit out of them lol

    and how pissed was his parrents?

  • I'll never understand why people spend money trying to turn economy cars into sports cars.

  • grenade that shit

    whooo

  • har har this will be my transmision test har har. well looks like your tranny held up didn't it? tell ur coke head buddy to learn a few things b4 he grabs a camera. that e46 would smoke u too lol

  • if he sold coke instead of snorting it he could easily buy a new engine and lessons to learn what all the parts are.

  • wow m3s may suck but trying to make that point scares me goooby engine

  • yo coke head lol

  • cut that pinky fingernail bitch!

  • COCAINE MUTHA FUCKA!

  • *slow clap*

  • Fatality!

    Total Annihilation! LOL

  • therES A VIDEO OF HIM TRING TO RACE A M3 AND HE GOT OFF THE LINE AND BAM!!! THATS WHAT HAPPENS WHEN YOU BUY A 7 BOLT OR 420A ENGINE

  • Crankwalk it is. 2nd Gen GST and GSX Eclipses are infamous for it.

  • That isn't crankwalk. He snapped a rod, completely different.

  • is this "crankwalk?"

  • how the hell did that guy do that? what did you do put it in reverse while going 80? that guy needs to cut his nail, i dont get the point of 1 nail being huge unless you lost a bet.

  • to snort coke.

  • Cut your pinkie nail, junkie!

  • lol its funny how they pretend to knwo what they talking about...

  • Much love for Eclipses and also much love for M3s ... However "u can't just climb in the ring with Ali just 'caus u think u can box" same story in the movie ... M3s and Bmw's in general are a breed apart

  • U know I wish this would happen to all those ricer with there shit Civics who always try and fly by me with there loud ass fart cans I wish I just had a button on my car to make this happen to them

  • thats what happenes when u drive a junk car

  • look at that guys crack nail, on his pinky.

    lol crackheads.

  • Thats why you dont drive shit japanese cars.

    The M3 wasn't even trying. He would of owned his ass.

  • Wow that must be depressing. Shows the force behind each explosion in the cylinder though lol.

  • Thats why its a REALLY good idea to build the motor eventually...especially if it has high miles...

  • That sucks, my first DSM was a 93 Laser turbo, I fell victim to crank walk at 147mph! And, for the record. DSMers are NOT ricers, we walk just about everything that comes to the table.

  • rice lies

  • another victim of crankwalk

  • look i own a 999 gs-t but im not stupid when it comes wit m3s and muscle cars

    i lose no doubt about it

  • pssshh... slap in less than 3g's in that motor and you'll kill em like candy

  • i'm not a hardcore dsm/evo fan but i've seen talons/lasers walk all over m3's porsches and v8 iron

  • are you guys kidding me...RICE... i saw the DSM pull away from that m3... not sure if you know but m3 are fast.

  • do not ever say m3 suck or any car suck...this is what happen when you look down on other people's car...Just keep it to yourself..M3 driver must of heard you say that his car suck so he curse you...

  • rofl, stupid ass ricers.

  • I think some rice fell in the engine.

  • Wow you must be the most ignorant 26 year old on here. I didnt know a stock awd turbo eclipse was a rice burner. If thats a rice burner i guess an evo, sti, supra, rx7, and many others are ricer burners as well dumbass.

  • hahahahahahahahahahahahahahaha­hahahahahahahahahahahahahahaha­hahahahahahahahahahahahahahaha­hhahahahahahahahahahahahahahah­ahahahahahahahahahaahahahahaha­hahahahahahahahahahahahahahaha­hahahahahahahahahahahahahahaha­hahahahahahahahahahahahahahaha­hahahahahahahahahahahahahahaha­hahahahahahahahahahahahahahaha­hahahahahahahahahahahahahahaha­hahahahahahahahahahahahahahaha­hahahahahahahahahahhahahahahah­ahahahahahahahahahahahahahahah­ahahahaahahahahahahahahahahaha­hahahahahahahahahahahahahahaha­hahahahahahahahahaha

  • ha ha ha looser that is what you get for driving rice

  • whats with the fag ass pinky nail. homo

  • haha i think its a nose picking nail ..

  • well thats what you get when you mess with BMW's..... :-X

  • Yeah, this video is old, and I doubt it was too much boost, most DSMers know thier limitations. My guess is an assload of knock, same thing happened to my first DSM(1993 plymouth laser awd) damn that was a shitty day.

  • probably revved it too hard i saw the first part and has was bouncin the redline no matter what turbo u got theres no point in revvin a dsm within 500-1k of the redline theres no power there anyway unless you are in ur final gear and he wasnt in his final gear

  • retards shouldnt post in these kinds of videos trying to explain what they think happened. it had nothing to do with redlining during the launch. my guess is that he has 2 step which is just a programed rev limiter for first gear. he probably was running too much boost for his block to handle. well theres a good way to get rid of a 7bolt. this video is old btw.

  • like i said this guys obviously doesnt know how to drive and if u tok the time to listenin the first vid he didnt redline during the launch he was redlinin it when he shifted 2-3 3-4 etc. listen you can hear the damn thing, launch had nothin to do with it considering (like i said if you watched the first part) he launched pretty well it was his shifting that messed him up although im not going to argue with teh too much boost thing

  • If it aint ur video then why did u post it up?? retard...

  • aww wrong video comment...sorry

  • This video is not a GSX its an MR2...Im glad to know that some douchebag decided to throw DSMs into this ricer blowing his engine

  • its a dsm dummas...mr2s engin is in the back and the front of that car is a eclipse

  • replace the motor !!

  • thats what i was thinkin lol

  • ouch. i snapped a rod and it shot through the block.. =(

  • m3s what?.... oh shite there's my block in pieces on the ground....do it right the first time you newbs!

  • nice coke nail ;)

  • shoulda bought a bimmer...that's what you get when you say they suck...and what's funny is that bimmer you were racing was stock...what all have you done to your car? why don't you race an 80s 4 banger that's been properly tuned before you try a bimmer...haha

  • that what happens when you say BMWs suck hehehe haha

  • Makes me want to buy a japanese car.

  • i guess this is a common thing.. my GSX had a similar fate.. except i was just driving it, not racing.. and they say American cars suck, lol

  • mitsu is the exception to jap reliability. and they were allied with chrysler for the dsm project.

  • dude wtf u do to a jap car, u know they cant handle the rpms lolz

  • The car is Japanese, but the engine isn't. It was manufactured by the Diamond Star Motor Company in Normal, Illinois.

  • It's actually the other way around. Most of the parts and the final assembly are from Normal, Illinois but the engine and transmission come entirely from Japan.

  • You launched it way too hard, bro. I hope that doesn't happen to mine.

  • nice crack nail, loser, you got what you deserved by shit talking other cars....

  • My GSX is in alot better shape thank god.

  • OMFG, Idz videos FTMFW!

  • nice coke nail.. ROFL!

  • a some JB weld and a little more of mommy and daddy's money and this kid will be back out on the street "terrorizing" M3's.

  • lol

  • damn gotta remember its a dsm! hahahah but you know 4g63 kicks ass!

  • omg what a loser..so embarrasing, talking shit on an M3 then loses in the worst possible way.. :D pretty obvious it was gonna die by the way he carelessly launches it...

  • is that car for sale :)

    esubaru22@yahoo.com

  • No, the car crashed N then a fucking elephant walks over the car.

  • wow, that makes me think twice about my GS.

    Its weird cause i thought that 4g63 engines were stronger than that and could easily support bigger turbos and more serious mods.

  • wow...that makes me think twice about my GS...

    Its weird, cause i thought 4g63 engines were stronger than that and could sustain some bigger turbos, and more serious mods.

  • they can but he probbly did some bad tunning and pushed it beyong what stock parts can handle u should be safe with 350hp on ur stock block and internal parts dont go more

  • how did that happen lol, what did you do, did u floor it? that cyl head looked like a chewed up chocolate chip cookie.

  • It wasn't me. Just some crackhouse that thought his juiced up car could sustain the power with stock internals.

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more