9.66 3.4 whipple 03 cobra

[oli8181]

awesome!!!!!!

[EZFI]

Stock cams hahaha eat that lsx guys!! You should put that on the title!!

[traxxas35]

why do some people take out one of the headlights?

[rtusnake]

@traxxas35 Air filter is behind the passenger headlight

[Corrybasler]

dear santa....

[forged420a]

What kind of shocks/struts were you running???

[rtusnake]

@forged420a qa1 single adjustables front and rear

[forged420a]

@rtusnake Awesome! Thanks man, I was thinking of getting Strange 10 ways, but I dont like the fact that they are noisy.

[rtusnake]

@forged420a You don't want the qa1's then, they are the noisest shock I have ran so far.

[forged420a]

@rtusnake Dammit! Ok Nevermind. Is there one that you would recommend??

[rtusnake]

@forged420a I'm using tokico now, but haven't drove on them yet. Alot of the noise comes from the coilovers. Maximum motorsports has really nice coilovers but they are pricey

[forged420a]

@rtusnake I haven't looked into Tokicos... If I dont get the strange or qa1 because of the noise, ill probably fall back on some lakewoods... sucks they cant be adjusted though.

[gamebred26]

you use a two step? i didnt hear anything? just hold it at 4800 and fast slip?

[rtusnake]

@gamebred26  No two step, just leave at 5800 with a quick release

[gamebred26]

@rtusnake power shifting? or lifting? did you have a no lift to shift box?

[rtusnake]

@gamebred26

Tranny was faceplated. No need to lift

[askloglog]

thats incredible, i wish i could get my hands on a terminator

[twinscrewmach1]

do you have any suspension mods too or just slicks?

[rtusnake]

@twinscrewmach1 Has upper and lower controls arms and anti roll

[Louderbomb]

Stock longblock? wow thats crazy gotta love it!

[kcole939]

What clutch, shifter, and shift knob?

[rtusnake]

@kcole939 Stage 5 spec, stock shifter and hurst knob

[nhra1625]

holy crap! my dads 67 camaro does that and its 660-670hp and 2800lbs!!!

[07e90335]

@nhra1625

at 27 lbs this car is prolly upper 700s maybe more. driven like its stolen. and it's raceweight is probably over 3200

[rtusnake]

@07e90335

Car weighed alittle under 3600 and made 721 on the dyno

[jihadsquad07]

damn near pulled the wheels off the ground on the 1-2 shift

[Grifkylian]

jeezus that's a fast time for a 6-speed. WOW

[rfomlover]

Solid rear axle?

[rtusnake]

@rfomlover

9" ford

[FlawlessVizionz08]

FUCK when he hits second, it looks like the car took off for a second time. crazy hook

[04KBSVT]

What cutback is on it in this video? Sounds really good.

[rtusnake]

@04KBSVT Exhaust setup is, kooks 1 7/8, 3" kooks x and bassani mufflers dumped at the axle

[202WRX]

built irs or sra??

[rtusnake]

@202WRX  Ford 9"

[renaldy75]

FORD= First On Race Day

[juztanotherday2]

Nice launch , what kind tranny?

[rtusnake]

@juztanotherday2 T56 6 speed

[p4ndiamond]

@juztanotherday2 i find that easy to masturbate too :D

[Forbes9x8]

I wouldn't have believed a terminator ran 9's, damn near stock except a bigass super charger slapped on, if it wasn't on youtube! Never seen a Cob launch that friggin hard! You gonna make me wanna do a 4.6 swap in my 92 notch : ). - JC

[Mustang2160]

fuck that thing is fast

[TheRandomGuy37]

10 second cobra..... My Dream Car :)

[leadsailz]

whipples nipples

[adriank9]

Do you have to watch the front going up too much or it won't go higher than this? amazing car!

[rtusnake]

@adriank9 It never goes up higher than that.

[A4Eaton]

@rtusnake What cam are you running?

[rtusnake]

@A4Eaton Stock cams

[vtec6465]

man nice fu*king driving...havent seen much better then that

[JustinConcussion]

For some reason . . . I can't seem to get my tongue in my mouth and my jaw off the ground . . . .

[ilovegoatsecks]

damn howd you get your v6 to go that fast? mine can only do a 17.8 with intake and exhaust

[JETSTA916]

@ilovegoatsecks ROFLLLLLLLL SHIEEETTTT

[Venomous04Cobra]

I finally got my 3.4 on! Yaaayy! Now my question is, what do you have on your car as far as weight reduction? I have a rear seat delete, qa1 k member, a arms, coil overs and some other little stuff. Just kinda trying to get a estimate of my et. Hopefully I'll be close to a 9!

[rtusnake]

@Venomous04Cobra I didn't have much at that time. Still had full interior. I did have the sra and kmember and a arms

[boost178]

@Venomous04Cobra u got a 3.4 damn lucky i was just to chicnek to put a 3.4 on my 04 cobra i just tuned my o4 cobra made 630rwhp 570tq honeslty i just want a high 10sec pass with luck lol..

[natex46]

What gears??

[rtusnake]

@natex46  3.89

[Chase389]

Any numbers?

[rtusnake]

@Chase389 721hp 640ish tq

[Chase389]

@rtusnake Alright man thanks!

[WhiteVenum]

I gotta give it to you, that was a awesome pass. Good job and sweet car

[SmoknSS01]

weaksauce..... :P

[Venomous04Cobra]

@rtusnake

What does your car weigh? My 2.3 is coming off I'm a couple days and the 3.4 is going on with the modified inlet from evolution performance. I'm trying to figure what shell run. Mines silver also so it should be fast! Hahaha

[boost178]

ima put the metco lower pulley hopefully see around 600 then with cams

[rtusnake]

@boost178 It was alittle over 3600 at that time. Also no doubt it will be faster being sliver :)

[alibird88]

Hey, Can anyone pls tell me where can i get that headlight, or how to do it.

[rtusnake]

@alibird88 I made mine. Just cut out the lense around the lighted part and use a holesaw to cut the back part out

[boost178]

im tunning it hopefully friday getting some good numbers i hope mike murillo has a real mustang dyno where he puts a full load for exact rwhp numbers..

[3lanimal1]

its a car or a kangaroo????

[rtusnake]

@3lanimal1  Cargaroo?

[3lanimal1]

@rtusnake lmao

[boost178]

shit man i hope i can get 630rwhp out of it its the stock motor...hopefully mike murillo can do some magic lol..

[rtusnake]

@boost178 Murrillo is one of the best

[boost178]

@rtusnake i just took the stock shit off an putting in the 2.8kb...im just fucking with the pumps an boosta pump tommorow....man that top unit was tricky cause of the two lines of the intercooler were in way an i was trying to yank it out lol so i just took the whole freaking thing off with the intake manifold.

[boost178]

@rtusnake man bro they just tuned my cobra an it only made 540rwhp 495tq @16psi....that sucked man but mike murillos dyno is a true mustang dyno it jus got calibrated so the numbers are freaking accurate as shit....but anyways it was with a 3.75 kb pulley got the wrong one hopefully with the 3.25pulley i will make 600rwhp with meth....wich on the old mustang dyno it woulda showed 638rwhp but the whole time the other dyno was not accurate an now they calibrated to true rwhp numb..no junky dynojet

[rtusnake]

@boost178 I wouldn't worry to much about the dyno numbers, just see how it runs at the track

[boost178]

@rtusnake say bro what rpm u can launch the irs ??? going to track in a week? on some 26x10.5 e.t streets..

[rtusnake]

@boost178 I usually left around 4800-5200 on a 28" tire. I would try around 4200-4500 on that size tire

[boost178]

@rtusnake but the irs is all stock fuck it if it breaks lol......and the silver cobras are nice except mines black on black lol....man bro i wana make 600rwhp on a mustang dyno but mike will be in florida so he cant tune till 2weeks that sucks..

[boost178]

i sent the whipple 2.9 bck an ordered the 2.8kb lol fuck it...

[boost178]

well regardless whipple or kb are both bad ass as i can see on ur car lol...that kb sounded like a transformer on the tree lol i was like wtf an there it went eheheheheheheheh.....

[hiasdamoon]

damn. thats a fast ass cobra !!!!

[dumbluck0629]

im a hemi guy but man i love that ford sound

[Venomous04Cobra]

What front wheels are those? They Great and light. I need some just like those to powder coat black on my car!

[96stang2Fst4U]

lol 1seriousasshole what a dumb lil bitch i guess some ppl dont try and finish school that was fine example of a drop out

[96stang2Fst4U]

27lbs boost on stock motor?????? how much hp can that stock motor of n/a s/c cobra take

[1seriousfucker]

@96stang2Fst4U more than your fucking turd can take. get a real car loser. Nothing more than a shit talker on all these vids.

[rtusnake]

@96stang2Fst4U It lasted alittle while, I think 23lbs would last for along time on a good tune

[DapimpBDSD]

@rtusnake Alright thanks for the info

[DapimpBDSD]

@rtusnake Alright, Thanks for the info

[DapimpBDSD]

I was thinking of doin a 3.4 whipple swap on my cobra . Did you have any hood clearance problems?

[rtusnake]

@DapimpBDSD You do have to clearance the hood for it to work on a stock hood and run a certain size upper pulley

[boost178]

i just got a 04 cobra is a 3.4 whipple to much for the stock motor? or is a 2.9 just enough?i see your car is fucken fast but will the motor last with that power?

[rtusnake]

@boost178 Depends on what you mostly do with the car. I mostly race mine is the reason I went with the 3.4. The 2.9 should do very well also. My motor did lose a piston with the 3.4 but I have been racing it since I have owned it

[boost178]

@rtusnake my best time on my other mustang 2v was 11.4e.t but im hoping i can get this cobra in the tens...with just a 2.9 and slicks.

[boost178]

@rtusnake man bro i sent back the 2.9 whipple to get a kb 2.8 cause my tunner says there more reliable an sound better...

[rtusnake]

@boost178 The kb's do have more of a whine. You couldn't hear the 3.4 at all. Both are pretty reliable imo

[boost178]

holy shit....11.4 sits my ass back i can imagine 9.66e.t

[03svtgtr]

What in the world?!?!? Insane insane insane!!! The take off is brutal

[Venomous04Cobra]

I've got 620hp/590tq with a gen 1 whipple on my stock bottom end right now on 18-19lbs. If I put a 3.4 on my car how much boost would I have to push to see 700? I'm a svtp member 2001snake on there. You car is my idol! Lol silver cars are faster!

[rtusnake]

@Venomous04Cobra lol I feel you on the silver cars. Seems 21-22lbs makes 700 on most other cobras. Mine is rtusnake as well on svtp

[boost178]

@rtusnake lol i own a black cobra made 630rwhp on 21psi with the 2.8kb on 109vp pushing for 700 with a 3in upper pulley.

[praetorian2150]

@Venomous04Cobra, you could also setup a meth kit if your doing a 3.4 project. More protection for the engine, better octane and more power, specifically torque :)

[BLACKLACDTS]

nasty whore! whats it weigh?

[rtusnake]

@BLACKLACDTS It was around 3600 with me in it

[MaddCow99]

Hey rtusnake how is this car comin? Last I heard you were rebuilding it and shooting for the stick shift mustang record. Any progress or updates?

[rtusnake]

@MaddCow99 Getting close on parts. Just need the standalone and piping. Hoping to be ready to go before spring

[CalypsoNotch408]

This video really shows how strong those Ford DOHC motors are, a 3.4L blower pushing 27lbs? Very nice, and great run.

[mustanggt1996rules]

fucking sick ass cobra

[flyingapples9]

holy shit. you hit second gear so freakin perfect. SUPERB timing. that is insane! great driver, beautiful car. nice job

[halohadel]

so ok um, how did you get it to launch like this? How many t56's has this lunched?

[rtusnake]

@halohadel Heavy with the skinny pedal lol. Never broke the t56, but it is built

[202WRX]

@halohadel lmao look at his back tires

[ALMILLONAZO1]

themm thiss is BEAST !!

[STAGEIIGN]

THAT WAS IMPRESSIVE

[cooldude87awesome]

So freakin' awesome!

[SD3255]

Holy shit it took of. lol

[MrTsuperchallenge]

thats on my favs!!

[bbdropped1988]

is this thing for sale? :)

[nscthomp4]

great hook...for steele

[00freightshaker]

putting a solid axle in my 04 Cobra was the best mod I ever did. Are you running a fox body tubular K member aswell?

[rtusnake]

@00freightshaker I am using a tubular k member and fox length a arms

[1fast302]

DAMNN

[mcftrucking]

I pee'ed a little when he took off.....

[TheMrhoneycutt]

What all is done suspension wise?

[rtusnake]

@TheMrhoneycutt

Tubular front and coilovers, rear is aftermarket control arms and arb

[TheMrhoneycutt]

@rtusnake Are you going to go to the 8.8?

[rtusnake]

@TheMrhoneycutt It has a 9" rear in this video

[bigsmith72985]

@TheMrhoneycutt halfshafts?

[goofyexponent]

@TheMrhoneycutt Didn't you see it launch! It has rabbit legs under there!!!!

[PinkPanther094]

9 seconds... in a FUCKEN TERMI

[gunmetal0209]

Are those front brakes a lil small for 9 sec? Jw how well the stopping is?

[rtusnake]

@gunmetal0209 Just stock cobra brakes. No problems with stopping

[Danny7930]

rip off the side view mirrors get an extra .100 ripped off

[WontStop323]

@Danny7930 WTF! the mirrors only weigh about 5 to 10 pounds at the most....... Not worth it! Seems he's doing just fine running 9's and all with them on!

[Danny7930]

27lbs of boost?

holy shit.

[fadingabel7]

awesome car bro

[1suck1it1]

how much did it coast to supercharge it?

[rtusnake]

@1suck1it1 $3650

[Medjeed86]

how much hp at the crank, and at the wheels? it's by far the fastest manual cobra I've seen.

[rtusnake]

@Medjeed86 Not sure on crank but 721 at the wheels. Hopefully it will be a good bit quicker here in a few months

[witlessbanshee]

steele thats my track go there every friday baby

[dontfuckwitme69]

sick shiftin man

[snowplow1z]

just wanna see do you tune cobra,s

[rtusnake]

@snowplow1z No sorry. Huxracing does my tuning.

[jessegitsmylife]

Are those vette wheels in the front

[rtusnake]

@jessegitsmylife Weld alumastars

[Situ8ed]

Much respect on you're run. I wanted to ask you about the 3" Bassani catback. Was this with the SRA? Was it a custom job or what? i'm having a hard time finding #" catbacks...

[rtusnake]

@Situ8ed It is a sra but the mufflers are dumped. It was my 3" system I had on the irs. Bassani does make a 3" for sra cars though

[snowplow1z]

do you do tunes or can you tune a 03 cobra with mods

[snowplow1z]

just wanna know if your intrested in saleing your whipple..i live in huntsville al, if so 604 8464 jay,thanks

[rtusnake]

@snowplow1z

Already sold it.

[Z06kilr]

Ok shit car runs good ive got an 03 but the motor blew putting a navigatro block in there with gt500 heads im think 2.9 l whipple or just go all out and put the new 4.0 my buddy has same set up as u on his but hes got 410 gear and he cant bet the car to run right hes also got a built solid in there

[Z06kilr]

car runs fucken great i have just one question no two how much timing was put in the car and how much power it make r u still running the its or did u switch over to a solid

[rtusnake]

Timing was at 23 and it was around 720 on they dyno. It has a 9" in it now, broke the irs a few times before taking it out

[shftn6]

what exhaust you running

[rtusnake]

Kooks 1 7/8 longtubes, 3" kooks x pipe and 3" bassani catback

[blown1995gt]

That is a bad ass cobra what part of alabama are you from?

[rtusnake]

Lincoln, you?

[blown1995gt]

Trussville, Pinson area. Your car is sick! how often do you go to Steele?

[RacerXstl]

Rear gear? Slicks or DRs? very impressive car man.

[rtusnake]

3.89 and 28x10.5 et drags. Thanks

[april97cobra]

Awesome pass headlight! :D

I want one!

[4pinks]

I am putting twin turbos in now 67mm i will send you pics soon.

[4pinks]

How much boost by the way?

I had the 3.4 but didnt like it it overheats at 30lbs boost not ment to run beyond 26lbs i would say, it loses its efficiency.

i switched to a 2.8 Kenne Bell Mamoth and it went 4 tenths faster,its a way way better blower kit anyways 9.57ET way to go thats a great time.Keep me updated if you spray it on the( ETs )Oh love the silver nicest colour by far ,mine is silver too.

[rtusnake]

27lbs. Doing a twin turbo setup at the moment. Should be done in a few months hopefully

[4pinks]

@4pinks what it run with spray?

[4pinks]

@4pinks also did you end up doing the turbos if so send me pics and stats.

[4pinks]

Thats stupid quick for a stick ,wow you must be running spray as well . I have an 04 rag and it took 30lbs of boost with 200 shot to run 9.50s but i have an addtional 3 -4oolbs on ya because of full sterio,sweet sweet ride be proud not to many run mid 9s

[rtusnake]

Boost only, never had spray on the car. It went 9.57 the next weekend but lost a piston later in the day

[MysticCobra04]

Thats shit fucking fast

[rtusnake]

bogart d-10s on the rear, and weld alumastars up front

[Abe4racing]

Nice, nice nice, That's what I plan to do some day with mine. I'm sure you swaped the IRS for a live axle, but did you do any weight reduction?

What did you do?

[rtusnake]

It does have a sra. Only weight reduction at the time was wheels and tubular front suspenion. Had full interior

[Abe4racing]

Nice, so if you went all out in weight reduction you could probably shave another second.

What's an sra?

Thanks for replying man.

[rtusnake]

Solid rear axle. It has a 9" in it