detroit diesel sind absolute luschen gegen perkins weil perkins verbraucht weniger hat eine wesendlich bessere leistungsentfaltung laufruhe usw also detroit müll ^^
sounds well , it's a P6 from a massey harris/fergy combine and as such has a mechanically governed CAV inline pump instead of the pneumatic governed inline pump usually found on a p6.
dont ajust the idal speed cause it will speed up when its warm and plus it chokes them up if they run fast.I know because my grandad has got one similar to that one and when i start it up he always tells not to run it for because the man who had it before had it running his radiator in his shed and it was realy bad we had to strip it down for a total rebuild and they need some thing to make that engine work but what can you find cause it takes alot to make them work
where the accelerator lever is there is a screw that it always lays against, just loosen the lock nut and turn the screw clockwise a little and then tighten the nut and your done.
No, this is known as a P 6. They have the 3.5 inch bore and are about 288 cubic inches. I have a later version of this engine known as the 6-288 fitted in my wee grey ferguson tractor. The 6-288 has the same guts as the p6 but it is fitted with a C.A.V rotory diesel pump with mechanical govnor instead of the C.A.V in-line air govorned injector pump. The rotory pump makes the engine very livley. Check out my videos and you will see the wee grey fergie in action.
e27n p6 the best tractor ever!! i would not want a massey harris 744pd with their weak gearboxs as a gift,only to take out the engine & chuck the rest away!!!
Wow, what a good engine. Awesome sound, and I maybe buy a Fordson E27N, and then I am gonna put a Perkins P6 engine in. But whit no silencer, and maybe a turbo!!
That's a Hayabusa engine !
seapeddler 7 months ago
did the ford cargo uses this engine?
jaggass 7 months ago
koliko konja ima ovaj motor?
horsepower?
ivan92000 10 months ago
detroit diesel sind absolute luschen gegen perkins weil perkins verbraucht weniger hat eine wesendlich bessere leistungsentfaltung laufruhe usw also detroit müll ^^
perkinsmaster 10 months ago
perkins engines are shit
djdonalin 11 months ago
sounds good. diesel power
pal1986 1 year ago
I want it!! how much you want for it???...lol
NathansBackwoods 1 year ago
what a sound O:
DiVlJaKzzzz 1 year ago
anda lindo , ajustale un toke las valvulas
v8veneno 1 year ago
los motores de antes sonaban mejor
elunico7074 1 year ago
del año del cohete pero linda maquina
pabloossxd 2 years ago
Ese perkins es de la era de piedra..
SuperPachipachi 2 years ago
P6 first produced in 1937.
darkarts59 2 years ago
Perkins is the best engine in the world!
szymon170t 2 years ago 9
i second that
ktmmx29 2 years ago
I third that as well
Ive got a 354 in a 66 D200 with 1.4 mil on it. Still runs like the day I bought it
TodiShep 2 years ago
@szymon170t For a better diesel, watch "Detroit Diesel 6V53T" by erickoster. =)
joedrummer2010 1 year ago
Hello,
Does anyone know where i can find enige parts for P6 in europe ?
rudbog 2 years ago
I'm not a fan of Perkins, only when they are built by Volvo-BM.
husqy250 2 years ago
Dose that one use a Simms starter motor or different brand?
Aussie50 2 years ago
Good engine :)
traktorpovver 2 years ago
sounds well , it's a P6 from a massey harris/fergy combine and as such has a mechanically governed CAV inline pump instead of the pneumatic governed inline pump usually found on a p6.
perkins305 3 years ago
dont ajust the idal speed cause it will speed up when its warm and plus it chokes them up if they run fast.I know because my grandad has got one similar to that one and when i start it up he always tells not to run it for because the man who had it before had it running his radiator in his shed and it was realy bad we had to strip it down for a total rebuild and they need some thing to make that engine work but what can you find cause it takes alot to make them work
macfletcherhotmail 3 years ago
INJ PUMP NEEDS IDLE ADJUSTMENT.
BLAKEYBBLAKEY 3 years ago
you need to increase the low idle speed a little so it doesn't fluctuate as much and you might want to check the valve lash one more time.
BattousaiKenshine 3 years ago
gow do you increase the low idle speed on an engine
johnkawash 3 years ago
where the accelerator lever is there is a screw that it always lays against, just loosen the lock nut and turn the screw clockwise a little and then tighten the nut and your done.
BattousaiKenshine 3 years ago
She started up with a tap, good engine, good in pick up trucks too a lot of torque.
Weldaz1 3 years ago 2
is this a 6.247?
tpvalley 3 years ago
No, this is known as a P 6. They have the 3.5 inch bore and are about 288 cubic inches. I have a later version of this engine known as the 6-288 fitted in my wee grey ferguson tractor. The 6-288 has the same guts as the p6 but it is fitted with a C.A.V rotory diesel pump with mechanical govnor instead of the C.A.V in-line air govorned injector pump. The rotory pump makes the engine very livley. Check out my videos and you will see the wee grey fergie in action.
madeljacky 3 years ago
heh cool sound.
jesuschristbitch 4 years ago
e27n p6 the best tractor ever!! i would not want a massey harris 744pd with their weak gearboxs as a gift,only to take out the engine & chuck the rest away!!!
sumerzet 4 years ago
Fordson E27N? that top heavy numb thing? No thanks, I much prefer the Massey Harris 744 which also used that Engine
Brittlejester3 4 years ago
Nifty. Governor's hunting like crazy. Don't run it too long and overheat it.
apeppink 4 years ago
sounds like it needs a valve lash adjustment.
cjminokc 4 years ago
Runs better idling if you fil the covernor case with a bit more oil!( sounds nice , and starts super!
bugsier5 4 years ago 2
wat a cracking engine, do everybody a favour and put it in a fordson e27n!!!
sumerzet 4 years ago
out of a massey combine?
mountfields 4 years ago
Love the sound... ;D
Sulazoh 4 years ago 9
Wow, what a good engine. Awesome sound, and I maybe buy a Fordson E27N, and then I am gonna put a Perkins P6 engine in. But whit no silencer, and maybe a turbo!!
Modlendingen 4 years ago 2
I *love* the low frequency hunting on the governor spring when you fire it up. Started well, too
scammellexplorer 4 years ago 2
it's running a bit rough. Did you feed some cooling water into the thing before you started it?
douro20 4 years ago