buy yourself "plasti dip". its a liquid rubber in a can. submerge the whole servo in the liquid rubber (dunk it like a teabag) and allow to drip over the tin till the excess is off. reseal the tin very well.
once servo is dried gently trim around the servo output gear and your done.
put your receiver in a couple of party baloons for splash protection while its within the Rx box.
you can buy plasti dip ant your local hardware store... its about 6 bucks and super easy! take your servo out and dip it in untill it gets about 1 inch up the wire... let it drip and dry (about 5 hours to be on the safe side) then cut out the servo horn... do this to all your servos and your battery... but put a balloon around your reciever box.. but it all back together and GO MUDDIN!!!
power man nice tune
orcovavoulas 1 year ago
Wow that was cool looked like it was break dancing on ice
logantic 1 year ago
lol the foam flew out of my tire while i was doing donuts like that
oxymoron2727 3 years ago
what do you mean burnt out didnt you clean it?
chillygoat 3 years ago
how much it weights?
aparats6233 3 years ago
sorry, i dont know.
but its a fairly standard 2.5 tmaxx with some rpm parts + alloy chassis braces.
it would weigh very close to standard, maybe a little bit heavier
Obliv69 3 years ago
hell yeah!!!
bad91dually 3 years ago
THATS A VERY FAST 2.5 WHAT THE FUK
chkris3 3 years ago
tuned and geared to perfection.
Obliv69 3 years ago
@chkris3 man mine is waaaaaaaaaayyyy more faster then that
khalid67596 1 year ago
HOLY SHIT! i'd never have the guttz to do that to my T-MAXX!
nitroburner666 3 years ago
what about the esc/
cobain032 3 years ago
this is nitro yyou dumb ass, ther is no esc
rcfreak363 3 years ago 2
buy yourself "plasti dip". its a liquid rubber in a can. submerge the whole servo in the liquid rubber (dunk it like a teabag) and allow to drip over the tin till the excess is off. reseal the tin very well.
once servo is dried gently trim around the servo output gear and your done.
put your receiver in a couple of party baloons for splash protection while its within the Rx box.
Obliv69 3 years ago
that is exactly what i do
YamahaKodiak915 3 years ago
dued nice truck! hey how much did it cost to water proof it and what did it take?
johntogreen 3 years ago
you can buy plasti dip ant your local hardware store... its about 6 bucks and super easy! take your servo out and dip it in untill it gets about 1 inch up the wire... let it drip and dry (about 5 hours to be on the safe side) then cut out the servo horn... do this to all your servos and your battery... but put a balloon around your reciever box.. but it all back together and GO MUDDIN!!!
twiztidkid092 3 years ago
do you know where to get a snorkle? for the air filter
YamahaKodiak915 3 years ago
you dont need one as long as the air filter is above the water flow.
in the vid my friend is about chassis deep in water, its not completely sumberged.
the exhaust fumes can be heard gurgling out through the water though hehe :)
Obliv69 3 years ago
This has been flagged as spam show
watch my video
boogaloog123 3 years ago