Hi. I was really hoping I could get a copy of the PDF document of the PIC codes and circuit designs. If it's possible could you please let me know and email them to shehadehd@gmail.com
Thank you very much, and congratulations on the success.
@Xenojj Of course; wheels should be placed at the back. Because, there will be a time lapse between detecting the line via sensors and the reaction of motors respect to the line. I have tried lots of design related to the place of motors and sensors. If you want to use 2 motors instead of 4, this is the best design among my tries.
Hi! Regards from Mexico, I´m a mechatronic engineer and my final proyect is to make a line follower like your´s, and i have a little doubts about the mechanical body, i´m wondering if you could send me some info, or if you have a page with it. Thank you very much.
@Xenojj I am using Mabuchi RF370 with planetary gearbox. I had bought them from Banebots, but i think they don't sell them anymore. Motors are rated to operate at 1700 rpm at 7 volt nominal voltage. I am running them at 10 V. Their torque ratings are very high as well.
@MASfleet hello, i am willing to share some information about my robot. So, i am writing a pdf document including PID codes, circuit schematics.. I will let you know as soon as i complete writing that pdf. I need at most 2 weeks to do that. Thanks for your interest.
hello, can i get more information on building this robot? i've visited your site but theres no line follower. Hope to hear from you soon. Regards from Malaysia
This has been flagged as spam show
Hi. I was really hoping I could get a copy of the PDF document of the PIC codes and circuit designs. If it's possible could you please let me know and email them to shehadehd@gmail.com
Thank you very much, and congratulations on the success.
shehadehd1 1 week ago
Is there a specific reason you chose to put the 2 wheels at the back instead of at the front?
Xenojj 1 week ago
@Xenojj Of course; wheels should be placed at the back. Because, there will be a time lapse between detecting the line via sensors and the reaction of motors respect to the line. I have tried lots of design related to the place of motors and sensors. If you want to use 2 motors instead of 4, this is the best design among my tries.
thesilex 1 week ago 2
This has been flagged as spam show
Hi! Regards from Mexico, I´m a mechatronic engineer and my final proyect is to make a line follower like your´s, and i have a little doubts about the mechanical body, i´m wondering if you could send me some info, or if you have a page with it. Thank you very much.
ozwalld 1 week ago
nice robot, I was wondering what motors you were using but your site's in turkish. Could you please tell me, thanks
Xenojj 2 weeks ago
@Xenojj I am using Mabuchi RF370 with planetary gearbox. I had bought them from Banebots, but i think they don't sell them anymore. Motors are rated to operate at 1700 rpm at 7 volt nominal voltage. I am running them at 10 V. Their torque ratings are very high as well.
thesilex 2 weeks ago 2
@thesilex Thanks a lot, love how you share so much info about your robot!
Xenojj 2 weeks ago
did u complete the pdfdocument if so can u pls mail me febinsathar@gmail.com
febinsathar 3 weeks ago
Did you placed sensors in straight line or V shape?
ubaid88 1 month ago
@ubaid88 I placed 8 pieces of QRD1114 in straight line.
thesilex 1 month ago
@MASfleet hello, i am willing to share some information about my robot. So, i am writing a pdf document including PID codes, circuit schematics.. I will let you know as soon as i complete writing that pdf. I need at most 2 weeks to do that. Thanks for your interest.
thesilex 1 month ago
@thesilex can u share with me too? im really interested.
pretzelyna 1 month ago
@pretzelyna Of course. I'll let you know. Thanks.
thesilex 1 month ago
hello, can i get more information on building this robot? i've visited your site but theres no line follower. Hope to hear from you soon. Regards from Malaysia
MASfleet 1 month ago
awesome cool work nice....!!
29riteshkakkar 2 months ago
microcotroller used?
amaranthflavius 3 months ago
@amaranthflavius 18F4550 working at 48mhz
thesilex 3 months ago
What motor?
exapod23 4 months ago
@exapod23 Mabuchi RF-370 with gearbox. 1700 rpm at 7.4V (nominal)
thesilex 4 months ago
nice soundtrack
kle8309 9 months ago
Comment removed
kle8309 9 months ago
çok seri bir robot.
ibrahimomerdurmus 1 year ago
prison break ^^
OBOGAN 1 year ago 4