@deadpeng in this video the harddisks and the traffic on the street, i later replaced the graphics card, the power supply and the harddisks to fanless/noiseless. But i cant run it completely fanless, it has 2 fans in the right side of the case that suck warm air out. I used a potentiometer to slow those fans down to 300-400 rpm. With that setup its absolutely silent even at night.
you want a fanless gpu aswell, gpu fans are the noisiest bloody things in computers, i got a radeon 4890 for my work (and gaming) computer and its almost too bloody noisy to work on!
OMG.... Love your Case.... that is the most sexiest and awsome case I have ever seen, and yeah your cooler is nice too.
I have the same Cpu in my Gaming computer with a Zalman 9500 Blue LED cooler, I overcocked my chip to 2.7ghz, not game to go further... and I too have ATI card but mines a HD4870 1GB....
Nice system though, omg best ever case...
Where did you get the case from man...
and what do you use that system for, I mean it would seem to me to be put in the living room or somthing...
thanks, yeah i only use it in the livingroom mate,watching movies live streams listen to music, i also overclocked to 2,7, which is no problem for the ninja mini. the case is called antec fusion remote, i later changed the case fans but once its so silenced you hear the noisy hard disks...
dude, 2.7 and your not game to go further? i have a e5300 with an arctic cooling freezer xtreme, first thing i did when i finished the built was change the multiplier to 12.5 and the clovk to 266.
I would love to go further but AMD cpu's are very hot running and I live in a climate that gets to 35C + everday with no a/c, under full load cores peak at 85 - 90C and since I have posted on this I have been able to take it to 2.82Ghz. about an 18% o/c. It is too hot where I live to take it any further, especially on a CPU that was not designed for o/cing, however designed for reliability. The Cpu is rock stable at temperatures of 90C at 2.82Ghz 1.4V.... its an old hot mechine.
The opteron was a server processor on socket 478, there are not many boards that even allow overclocking. The e5300 is on socket 775 thats a totally different world.
And 3,3 with an e5300 is not that good, especially with such a high multiplier, i would lower the multiplier and raise the fsb, you get more power out of yer computer this way
what would you suggest i lower the multiplier to and what should i raise the fsb to have a better resulting overclock? also, how does this configuration improve my system performance??
at first i would test how far you can go with the fsb, set the multiplier really low and raise the fsb with little steps until the computer starts to make problems, on some 775 mobos you can also change the north bridge volt core, maybe raise that too, if possible.
It maybe nice to have such a high cpu speed but the fsb will limit the rams and the cpu, thats why.
But it also depends on yer ram and yer mobo how far you can go, it takes some time and many tests so be aware of that.
Why still so noisy
deadpeng 1 month ago
@deadpeng in this video the harddisks and the traffic on the street, i later replaced the graphics card, the power supply and the harddisks to fanless/noiseless. But i cant run it completely fanless, it has 2 fans in the right side of the case that suck warm air out. I used a potentiometer to slow those fans down to 300-400 rpm. With that setup its absolutely silent even at night.
kalismuggla 3 weeks ago in playlist Uploaded videos
Hello just wondering does this take full size graphics cards?
ceet12 6 months ago
@ceet12 theoretically if you mod the cage with a good steel saw :) if you just want to plug it in, its not possible
kalismuggla 6 months ago
you want a fanless gpu aswell, gpu fans are the noisiest bloody things in computers, i got a radeon 4890 for my work (and gaming) computer and its almost too bloody noisy to work on!
gobacktorussia 1 year ago
nice machine man, i want one of thoes
oddha 2 years ago 7
@oddha Haha, I'm selling one of the cases :p New
deanfransen 1 year ago
This comment has received too many negative votes show
You DVD drive is opening on its own because the jumpers are on wrong, might wanna fix that.
PS Zip ties aren't an excuse for poor cable management.
adamthe1st 2 years ago
the dvd drive is opening because i push the eject button, there is no need to jumper sata drives those times are over....
the cable mangemant is not needed in all of the chambers of the case because it has little gates to prevent that air goes from one to the other
kalismuggla 2 years ago
Hi Very Nice.
Thinking of buying that case myself, how does the front display connect up to mobo?
Lobatt1 2 years ago
as far as i can remember there is just a power on/off connector and a seperate power connector for the front display, should work with every mobo
kalismuggla 2 years ago
crazy alta!
Jetzt weiß ich auch, wie man in kurzer Zeit viele Klicks kriegt, jedenfalls nicht mit Gitarrespielen!
savingbenssisterbonn 2 years ago
OMG.... Love your Case.... that is the most sexiest and awsome case I have ever seen, and yeah your cooler is nice too.
I have the same Cpu in my Gaming computer with a Zalman 9500 Blue LED cooler, I overcocked my chip to 2.7ghz, not game to go further... and I too have ATI card but mines a HD4870 1GB....
Nice system though, omg best ever case...
Where did you get the case from man...
and what do you use that system for, I mean it would seem to me to be put in the living room or somthing...
ncnhomegrown 2 years ago
thanks, yeah i only use it in the livingroom mate,watching movies live streams listen to music, i also overclocked to 2,7, which is no problem for the ninja mini. the case is called antec fusion remote, i later changed the case fans but once its so silenced you hear the noisy hard disks...
kalismuggla 2 years ago
dude, 2.7 and your not game to go further? i have a e5300 with an arctic cooling freezer xtreme, first thing i did when i finished the built was change the multiplier to 12.5 and the clovk to 266.
and there you have 3.33ghz
addzkebabs 2 years ago
I would love to go further but AMD cpu's are very hot running and I live in a climate that gets to 35C + everday with no a/c, under full load cores peak at 85 - 90C and since I have posted on this I have been able to take it to 2.82Ghz. about an 18% o/c. It is too hot where I live to take it any further, especially on a CPU that was not designed for o/cing, however designed for reliability. The Cpu is rock stable at temperatures of 90C at 2.82Ghz 1.4V.... its an old hot mechine.
ncnhomegrown 2 years ago
lol!
addzkebabs 2 years ago
@addzkebabs
you can not compare an e5300 with an opteron.
The opteron was a server processor on socket 478, there are not many boards that even allow overclocking. The e5300 is on socket 775 thats a totally different world.
And 3,3 with an e5300 is not that good, especially with such a high multiplier, i would lower the multiplier and raise the fsb, you get more power out of yer computer this way
kalismuggla 2 years ago
what would you suggest i lower the multiplier to and what should i raise the fsb to have a better resulting overclock? also, how does this configuration improve my system performance??
addzkebabs 2 years ago
at first i would test how far you can go with the fsb, set the multiplier really low and raise the fsb with little steps until the computer starts to make problems, on some 775 mobos you can also change the north bridge volt core, maybe raise that too, if possible.
It maybe nice to have such a high cpu speed but the fsb will limit the rams and the cpu, thats why.
But it also depends on yer ram and yer mobo how far you can go, it takes some time and many tests so be aware of that.
kalismuggla 2 years ago
the opteron 180 is of course on socket 939.....missing the edit button :|
kalismuggla 2 years ago
Geile Schüssel!
mailmighty 2 years ago