Paintball Gun Turret

[Marcksterful]

no lie it fails

[XxDeanxX96]

That is so retarded it shoots so slow

[techdudz]

it will be hard to feed it side ways unless you make a custom feed neck

[Doghoundwikiti]

How do you aim up/down =?

[pippintoon]

good for scenarios though

[metallicashredder1]

if it was a gravity fed hopper it would be kinda useless if it was sideways

[MadForM9950Cal]

AHHH, MY ANKLES!! THEY BURN!

[attackRus]

lol

[pballer000]

good idea u could just slide it across the entire field and just shoot people and theyd be like wtf

[robvanmol]

indeed only must be locked on the crotch xD

[Superdudeawesome135]

thatssikk yo.. good thinkin.

[rcbchief]

how are u going to make the paintballs fall from the side

[funx07]

make the pipe bend?

[Greeder0]

Your design is flawed. the way you have it set up will make it spin in circles uncontrollably while it shoots, hitting everything around it, unless that's your intention...

[Dutch433]

nope it isn't flawed i've shot it about twenty times and the servo stops it from spinning needless to say its taken apart now

[1stpimpking]

what is the thing that pulls the triter and were do i buy it if not made

[Dutch433]

its a servo online or a hobby shop and you have to make a conection

[hock3ydud3]

i dont kno much about paintball but wouldnt the paintballs not feed into the hopper well without the pull of gravity pulling the into the chamber?

[dzsk8r]

use a bent feed neck or make one..

[XXflapjaxXX]

make it aim up and down now :DDD

[xxninjamasterxx]

hahahahaha how bored were u!?!? LMFAO!!

5/5 (bcuz it is so pointless)

[Dutch433]

the gun hadnt been used in a year and i was bored as hell so i made it but ow i play paintball so its all in pieces now

[ItzKylez]

i would think it be possible to make it move diffent ways with a remote control cars motorand board

[Dutch433]

an example of what you are talking about would be helpful

[pbstare59]

didnt no it ws so hard to poot a remote contoll car nder a peice of fucking wood

[ItzKylez]

did you use a remote control car to move it and the steering for a remote control car?

[Dutch433]

i used a radio reciever and 2 servos one for rotation it has been modified and one for the trigger a standard servo

[nazc0]

dude just get an e-grip for like 40 bucka and just wire it up

[pclle]

even if u get a 90* elbow youll have to ave some sort of pitch to let the balls gravity feed into it..or they will just sit in the horizontal area..and if u reeeally wanted to get technical you could have an electronic trigger and have some sort of transistor close the switches and motion is detected..lol great job all in all man

[Dutch433]

with electronic triggers you can hardwire it to act like a servo its been done im just poor and thats all i had lol

[nrhegpaintman]

you will need a 90* elbow to feed it but you can get that at almost any hardware store

[Dutch433]

i made a feeder

[FTWMikeDero]

replace the trigger servo with some kind of rotational system that has soft fingers or something like it that lightly flick the trigger

[Dutch433]

you cant lightly flick that trigger and shoot

[redwall268]

thats pretty cool if the finguer shooter was a bit faster otherwish thats sick

[Dutch433]

what the servos slow so it cant be

[BlackMage1023]

that would be awseome if u used this divise for painting a room lolz

[Dutch433]

that would be funny

[vov35]

that hopper setup is gonna be a pain isnt it...

[urbanannihilators]

actually, you could take a q-loader and put it ontop of the side of the gun.

[vov35]

yea and q loaders cost how much...

well, it seems like to much for this simple project

[urbanannihilators]

ahh, so true..

[etekego12]

no you take thoes plastic hopper pieces that make the hopper like bend i cant relly explaint it but put it on there

[vidmaster222]

lol, oh ya and i dont whant to be a nagg but paint ball gun is politecly incorrect, its paint ball marker, but what the hell, nice vid!

[tank330]

i got one like that but mines silver

[Dutch433]

i dont think they made any silver tl-r's

[tank330]

its not like silver its crome...it comes with a sniper barrel and you can get one at dick's sporting goods

[Eman425]

what do you have turning it.....how is it set up

[Dutch433]

three channel reciever. 1st channel for rotation via a direct drive servo to the board and 2nd for the trigger no 3rd channel is used

[Eman425]

where did you buy the three channel reciever and the servos?......thanks for the help :)

[Dutch433]

a hobby shop in town got radio and reciever servos from a revo that needs an engine and the pb gun from academy sports. casters and washers needed for the rotation from home depot and scrap wood

[10mcguire]

WTF

[dlotus44]

one word....Qloader

[KatunoIzuki]

Lol sweet! One problem, how will it shoot? The paint uses gravity to fall into the gun, but if its sideways the paint will stay in the hopper -_- Unless ure using an electronic hopper then it would work :D Good job man :D

[Dutch433]

i didnt have my homemade system on its angled so it will fall i just have to test it

[komrev]

hahha that battery pack is for traxxas hah nice work there!!

[Dutch433]

so are the servos

[paintball164]

nice

[PWAALEX]

that made me laugh  lol

[Dutch433]

and why did it make you laugh

[oscumguy]

gj man

[Dutch433]

guessing that means good job

[jamparty000]

that crazy cool now u just have to get it upright

[Dutch433]

i need more than three channels to do that the third channel on this radio is on/off.its from a revo

i have plans to do that in the future