I don't know either considering I've ALWAYS brokn something before I hit the voltage cut-off !! ;)...I know from my 4S set-up that it depends greatly on how you are driving it!
MIP CVD's, rc monster steel idler gears, modified transmission shaft (you put a drill bit or other solid object where the roll pin goes through the gears), aluminum diff cases and cups, shimmed diffs, strobe slipper with mod 1 gears.
I still have to replace diff gears every once in a while. 1/8th diffs would be stronger.
I now have the same setup in a 1/8th truggy (you have to convert them from nitro to electric). I like the truggy better, especially for racing.
I run an EMAXX 2200KV Monster with 6S of 5000mah and 35-45C, SILLyNESS !!!!!
Breaks like glass with those batteries, lol!
Nothing compares though ~! 4X4 slashes can eat their hearts out! Yea man, you need all that $hit below to keep her in one piece if you have an itchy triggfer finger !
what are the heats like?
JacobMorrell 9 months ago
I think I used a 51t spur and a 20t pinion.
That was with the old style e-maxx transmission though, the newer ones have a slightly different gear ratio.
Bewenick 1 year ago
hello
what pinion do you use?
thanks
belizonnn 1 year ago
Hello Bewenick. That time of autonomy you have?, run minutes?
Thanks.
jav24438 3 years ago
I don't think I've ran a full pack in it, but I'd say about 15 minutes driving like that, and a bit longer if you geared for less speed.
Bewenick 3 years ago
I don't know either considering I've ALWAYS brokn something before I hit the voltage cut-off !! ;)...I know from my 4S set-up that it depends greatly on how you are driving it!
TrustworthyMtgGuy 2 years ago
Looks good dude..
aqwut 3 years ago
How fast is it?
tbvdb 4 years ago
nice speed. what did you do to the drivetrain to make it last? thanks
neavissa 4 years ago
MIP CVD's, rc monster steel idler gears, modified transmission shaft (you put a drill bit or other solid object where the roll pin goes through the gears), aluminum diff cases and cups, shimmed diffs, strobe slipper with mod 1 gears.
I still have to replace diff gears every once in a while. 1/8th diffs would be stronger.
I now have the same setup in a 1/8th truggy (you have to convert them from nitro to electric). I like the truggy better, especially for racing.
Bewenick 4 years ago
hahaaaaaa hoohoohahahaaaaa
I run an EMAXX 2200KV Monster with 6S of 5000mah and 35-45C, SILLyNESS !!!!!
Breaks like glass with those batteries, lol!
Nothing compares though ~! 4X4 slashes can eat their hearts out! Yea man, you need all that $hit below to keep her in one piece if you have an itchy triggfer finger !
TrustworthyMtgGuy 2 years ago