ok thank you for help,but as you have had mentioned already that there is no cable conector have you add something or?????????? a parts that I got fro them should be ok,I got hm+
hi,how long it takes to instal it,I got same model and same quickshifter,what is kill timeand etc,if you do not mine to give me some small tips I will be more than happy
@MrZoranbebek Hi. I suppose it took about 3 hours in total to be honest. If you're quite a competent home mechanic, you'll have no trouble, but plan the wiring route first! Unfortunately, there are no cable connectors on the HM quickshifter, so you have to think about how you're going to route things. I went from shift rod to under the rider's seat (for the display), then back down the right hand side to the coils. It is possible to fit the loom without removing the side fairings.
@MrZoranbebek Kill time was pretty much perfect with factory settings. I think I may have shortened it by 5ms or something, but can't remember without taking the seat off again, sorry.
Very noice! Just finished fitting a hm shifter to my 10r tonight.. Cant wait to test it out!
chaoticspiro 2 months ago
I heard about HM QS, are they that good?
chopgr 5 months ago
@chopgr Yes, very good indeed. You won't find a better quick shifter.
s1ix 3 months ago
@s1ix Hey, glad you like it :)
Got any more vids you can share?
MrHMQuickshifter 2 months ago
Comment removed
kyu7string 8 months ago
Video would have been better if shot from the shifter side.
gohorns2323 11 months ago
well I made it it works perfect and it is not hard it took me about 2 hours.anyway thank you a lot
MrZoranbebek 1 year ago
ok thank you for help,but as you have had mentioned already that there is no cable conector have you add something or?????????? a parts that I got fro them should be ok,I got hm+
thank you.Z
MrZoranbebek 1 year ago
@MrZoranbebek You should have got a sub-harness for Honda when you purchased the shifter. Otherwise, it's available separately from HM.
s1ix 1 year ago
hi,how long it takes to instal it,I got same model and same quickshifter,what is kill timeand etc,if you do not mine to give me some small tips I will be more than happy
MrZoranbebek 1 year ago
@MrZoranbebek Hi. I suppose it took about 3 hours in total to be honest. If you're quite a competent home mechanic, you'll have no trouble, but plan the wiring route first! Unfortunately, there are no cable connectors on the HM quickshifter, so you have to think about how you're going to route things. I went from shift rod to under the rider's seat (for the display), then back down the right hand side to the coils. It is possible to fit the loom without removing the side fairings.
s1ix 1 year ago
@MrZoranbebek Kill time was pretty much perfect with factory settings. I think I may have shortened it by 5ms or something, but can't remember without taking the seat off again, sorry.
s1ix 1 year ago