hey man sweet ride.. i have a fresh 383 in my monte ss with trick flow heads... i was wondering what heads, cam, intake and compression you are running and also how much boost? email me a jaylamb355@yahoo.com
@RedHotMonteSS383 Sorry I didnt see the post. I have the 2.02 orld trick flows, ported 66cc with comp valve job, compression is 8.3:1 w/ JE 383 pistons. intake is the edel performer with the vortech carb eclosure. I think the cam is like a 230/236 510 lift on a 113, but email me if you want exact specs. it makes 650+ torque from 4,000 rpm up and stays flat at 650 torque. 700 hp if blower belt stayed on (made 645 at 5,300rpm). plus i had only 28 degrees timing because no intercooler or retard
I have this enclosure for sale. Has twin 2.5 inch inlets welded on front top lid. Blow off valve can mount on original Vortech inlet location. Worked very well. $300. email if interested.
@79TAGio hey man., it is carb, much easier... they sell the chargers chepa now, under $2k new. i think the whole setup, blower ducting with enclosure is like under $3k in jegs now. good deal
thanks bud. Its somewhere between 2-3". I bought it from S-K Speed in Lindenhurst NY a long time ago. I guess you'd have to call to see if they still have the brand! later
I don't like how those super chargers sound. Do they always sound that way? Seems every time I hear one, its as if there is a bad bearing. Too noisy and not stealth at all>
@y4utalktome well, the older ones were louder in general and there is a factory spec that it must be within (some are louder than others. the newer ones are quieter. depends on the model. i just had the old one rebuilt rather than upgrading to a new (quiet) one.
Good stuff Munks, hopefully I see you down by Englishtown for Street Wars 3. Bringing down my '84 TA w/T88 turbo, and I would love to see some more third gens representing with me that day....
@StreetLethalRacing thank you brotha... i finnally put a tranny in it, looing 11's without slicks and low boosst. i was planning on going up in the fall, when is street wars 3?
@Munks1320 They have it listed as Street Wars 2, its on Sunday November 14th, so air temps should be kept in check. I'm hoping to make a few passes mid september to dial everything in. I have a thread going on over in the Power Adder sub-forum on ThirdGenOrg, I'm trying to get it done as fast as possible....
@StreetLethalRacing i'll see if i can get thter. i am going in october (private atco rental). novemeber 14 is late, cold track, but good if we get a sunny day.
@onlypresto i actually had it made a long ime ago at a flea market. they had a vinyl guy there. i wouldnt even know how to get him, but if you ebay search custom vinyl stickers, i'm sure u'll find someone! they can get the artwork online... good luck
@Munks1320 thats cool, they make and sell vinyl graphic sticker sheets at my local crafft store that come blank so i can cut my own, i need to go get some leather anyways to recover some seats for my truck anyhow
i hear ya..and thanks.. it just went 12.6 @109.4 last sunday...on street radials, only 24 degrees total timing and only 8lbs boost witha tranny that was slipping pretty bad....had to come off the gas to shift.
@IROCwarriorAMC88 Thanks a lot! you shoul hear it now. that was the 355. the new 383 sounds redculous with the 4" muflex and long tubes
Munks1320 6 months ago
haha LOVE that sticker and how it matches the gold sickk car bro
AM18095 6 months ago
@AM18095 thanks brotha. had it made up a long time ago
Munks1320 6 months ago
hey man sweet ride.. i have a fresh 383 in my monte ss with trick flow heads... i was wondering what heads, cam, intake and compression you are running and also how much boost? email me a jaylamb355@yahoo.com
RedHotMonteSS383 9 months ago
@RedHotMonteSS383 Sorry I didnt see the post. I have the 2.02 orld trick flows, ported 66cc with comp valve job, compression is 8.3:1 w/ JE 383 pistons. intake is the edel performer with the vortech carb eclosure. I think the cam is like a 230/236 510 lift on a 113, but email me if you want exact specs. it makes 650+ torque from 4,000 rpm up and stays flat at 650 torque. 700 hp if blower belt stayed on (made 645 at 5,300rpm). plus i had only 28 degrees timing because no intercooler or retard
Munks1320 7 months ago
I have this enclosure for sale. Has twin 2.5 inch inlets welded on front top lid. Blow off valve can mount on original Vortech inlet location. Worked very well. $300. email if interested.
dontsayiwont 9 months ago
@dontsayiwont can you email me that pic?
Munks1320 7 months ago
just made 645hp and 656 ft lbs at 5,300 before the blower belt came apart. should have made 7000, time for a 10 rib
Munks1320 10 months ago
Hey I got a question is the motor carb or fuel and also how much for the supercharger im new to superchargers thanks
79TAGio 11 months ago
@79TAGio hey man., it is carb, much easier... they sell the chargers chepa now, under $2k new. i think the whole setup, blower ducting with enclosure is like under $3k in jegs now. good deal
Munks1320 11 months ago
@Munks1320 thanks man ima consider getting one do i need to mod anything to put it in
79TAGio 11 months ago
@79TAGio not much.... mechanical dsitrib, boost referenced fuel regulator, return into oil pan for oil if you dont get a self oiled head unit
Munks1320 11 months ago
nice!!!is that a 2 inch cowl??where did you get it?
robmorgan1691 11 months ago
@robmorgan1691
thanks bud. Its somewhere between 2-3". I bought it from S-K Speed in Lindenhurst NY a long time ago. I guess you'd have to call to see if they still have the brand! later
Munks1320 11 months ago
nice!!!is that a 2 inch cowl??where did you get it?
robmorgan1691 11 months ago
yeah, the wiring is all done, that was when i first put it together.
KamadoKing 11 months ago
Nice car, but uhh, you need to take care of that wiring man...
scottyas209 11 months ago
Who cares?? It's just an automatic!! If it were a standard it might be worth something!
cooldude79790 1 year ago
@cooldude79790 you jealous piece of shit if you have nothing good to say then just the hell up you moron
camirocz 10 months ago
@camirocz Why would I have any reason to be jealous dork? I own an 89 GTA, 427 Rat, 302 Z28 cam,
4 speed, completely restored! Automatics are for the ladies to drive around in ... It's obvious you don't like hearing the truth!!
cooldude79790 10 months ago
Awesome car I have a 88 5 speed looks like this but I have black interior and black rims
bigcotie 1 year ago
@bigcotie thanks brotha. i;ll check it out.. u have vids up?
Munks1320 1 year ago
Nice car.
I don't like how those super chargers sound. Do they always sound that way? Seems every time I hear one, its as if there is a bad bearing. Too noisy and not stealth at all>
y4utalktome 1 year ago
@y4utalktome
thanks man. i like them that way. i'm not going for super stealth.. they do make them quieter, i got lucky and got a loud one ;)
Munks1320 1 year ago
@Munks1320
Lol @, lucked out with a loud one! Do they make a quiter series, or is it hit and miss with each unit?
I would think they get louder with use too?
y4utalktome 1 year ago
@y4utalktome well, the older ones were louder in general and there is a factory spec that it must be within (some are louder than others. the newer ones are quieter. depends on the model. i just had the old one rebuilt rather than upgrading to a new (quiet) one.
Munks1320 1 year ago
Good stuff Munks, hopefully I see you down by Englishtown for Street Wars 3. Bringing down my '84 TA w/T88 turbo, and I would love to see some more third gens representing with me that day....
StreetLethalRacing 1 year ago
@StreetLethalRacing thank you brotha... i finnally put a tranny in it, looing 11's without slicks and low boosst. i was planning on going up in the fall, when is street wars 3?
Munks1320 1 year ago
@Munks1320 They have it listed as Street Wars 2, its on Sunday November 14th, so air temps should be kept in check. I'm hoping to make a few passes mid september to dial everything in. I have a thread going on over in the Power Adder sub-forum on ThirdGenOrg, I'm trying to get it done as fast as possible....
StreetLethalRacing 1 year ago
@StreetLethalRacing i'll see if i can get thter. i am going in october (private atco rental). novemeber 14 is late, cold track, but good if we get a sunny day.
Munks1320 1 year ago
nice, love the vortec super charges, i got one on my 89, were did you get the sticker, i want one
onlypresto 1 year ago
@onlypresto i actually had it made a long ime ago at a flea market. they had a vinyl guy there. i wouldnt even know how to get him, but if you ebay search custom vinyl stickers, i'm sure u'll find someone! they can get the artwork online... good luck
Munks1320 1 year ago
@Munks1320 thats cool, they make and sell vinyl graphic sticker sheets at my local crafft store that come blank so i can cut my own, i need to go get some leather anyways to recover some seats for my truck anyhow
onlypresto 1 year ago
@onlypresto nice, good luck and post some vids
Munks1320 1 year ago
@onlypresto sure, i got to get a computer and camera first, i'm trying to get some things done before i start uploading, i'm on my sisters notebook
onlypresto 1 year ago
i hear ya..and thanks.. it just went 12.6 @109.4 last sunday...on street radials, only 24 degrees total timing and only 8lbs boost witha tranny that was slipping pretty bad....had to come off the gas to shift.
Munks1320 2 years ago
NICE!!! your car looks great, making me think 2wice about selling my GTA jajaj
fbody3rdgen 2 years ago
thnx, it pulls really hard, but i can't get the power down, it just blazes 'em in everygear
Munks1320 2 years ago
That thing has got to HAUL ASS
FSXPilot246 2 years ago