Tokyo Marui Glock 26

[srtviper2011]

Is it all plastic

[avgnman72]

@srtviper2011 internals are metal TM Kicks ass

[srtviper2011]

Un company has metal slides for tms

[srtviper2011]

Where did u get it

[Y34HT045T]

And does it (the gun) come with gas?

[Y34HT045T]

How much gas goes into one of those magazines? How many times can you fill it with one can?

[Snowstorm45]

@Y34HT045T Enough gas for around 3 mags of BBs, and as for how much you get out of a can? A lot, like 3000 rounds or something if I remember right.

[Dcdevilsfan]

If it has no upgrades and still has the plastic slide can the TM G26 run on duster gas?

[Snowstorm45]

@Dcdevilsfan Duster gas = HFC134a without the silicon lube. I use duster gas now that I'm out of 134a, you just have to remember to put a drop of silicon oil on the magazine valves every 8-10 fills.

[bmpc1984]

Hey which is better the ksc or Tokyo Marui? And do the Tokyo Marui come w an orange tip?

[Snowstorm45]

@bmpc1984 I'd get the TM, and they only come with an orange tip if you're in the States, as that's an American law.

[cianw10]

is it possible to buy a metal slide seperate? so that it can take propane and also feel better?

[Snowstorm45]

@cianw10 Yes, but good luck finding one, I don't think any of the companies that made them make them anymore. It sucks, because I want one too.

[burtonairsoft2197]

how many bbs can each mag hold

[Snowstorm45]

@burtonairsoft2197 It's supposed to take 15, but I only load 12 to avoid stress on the spring and other parts.

[NOTSEWEDAW]

where did u get this



[seelder]

kinda over exagarated the recoil

[Snowstorm45]

@seelder To be honest, I didn't. But in fairness, I wasn't holding it very tightly at all, kinda letting it kick, rather than holding it how I would while actually using it ;)

[seanchong125]

are u using propane or a different gas?

[Snowstorm45]

@seanchong125 nope, not on this, it's plastic slided. I use duster gas, in this video I'm using HFC 134a gas, which is duster gas with silicone oil added

[hankwest988]

The g17 mag fits too right?

[Snowstorm45]

@hankwest988 Yep, it'll take TM Glock 17 mags.

[vincereviews]

@Snowstorm45 About the magazines...will this fit an extended mag?

[Snowstorm45]

@vincereviews It will take any magazine made by TM or KJW, but not KSC.

[OoWyattoO724]

i wish i had one of these intead of my kwa m9 tactical

[Vagextrol]

Do you REALLY have to shake the bottle ???

Is it instructed to shake it, on the bottle ?

[mrcrazybadaze]

@Vagextrol yeah its instructed but its like on juice bottles its reccomended, but you dont have to

[Snowstorm45]

@Vagextrol No I don't think so, it just seemed like a good idea I guess ;)

[soccerfury10]

I have a glock 26, but this is really cool though, where did you get it

[IndivisiblePrinciple]

how many shots can this thing do per gas fill? and how far and how accurate are they?

For example, could they pierce a soda can?

[Snowstorm45]

@IndivisiblePrinciple If you fire off the mag right after you fill it you will get about one and a bit, but one time I filled it up, let it sit and warm up for ten minutes, and then fired one shot every 15ish seconds, letting the mag cool down for about one minute between mags and got, to my amazment, over 70 shots off one fill! The range is good and the accuracy is surprisingly amazing. From where I was standing I can hit one of the metal screws on that basketball hoop EVERY SINGLE TIME!!!!! :D

[Snowstorm45]

@IndivisiblePrinciple (Didn't have room) In a realistic game situation I'd say three mags per fill, depending on your style, and I actaually havn't done a coke can test to be honest, but I'm pretty sure it would pierce the sides but not the bottom, so 350 FPS, more or less, that's a guess, but a pretty good one :)

[Andy9742]

I got to hold this gun today, in Hong Kong, they sell them in toy stores, lol, it was the heaviest airsoft gun there. Really nice gun.

[Snowstorm45]

@Andy9742 Yeah it does have a lot of weight to it, it's in between the weight of the real one unloaded and the real one loaded, so pretty much right where it should be :)

[OzzYVideos102]

Where did u got the gun at?

[Snowstorm45]

@OzzYVideos102 007 Airsoft (I'm in Canada)

[hepaaja2]

cool blowback :D

[Deserteagleman1]

@Maekiii

mee too

[vidcrew7]

im getting fully metal one at wolf armouries what colour should i get em to paint it

[Snowstorm45]

leave it black, or get the frame in OD green, or a silver slide, thats about all that goes well with a Glock.

[vidcrew7]

i got to get it in with some colour cause of some law in england

[Snowstorm45]

oh, well I don't know anything about that, sorry...

[NallePu83]

ABS or metal slide?

[Snowstorm45]

ABS, I've been looking for a metal one.

[NallePu83]

@Snowstorm45 Hard to find....most store is out of stock

[Snowstorm45]

Yeah, I think they're all discontinued, eventually someone will start making some again, I can wait, the ABS slide looks and works fine.

[NallePu83]

@Snowstorm45 Guarder steel Glock 26 slide is nice....but sold out everywhere

I got the last Guarder Steel Glock 17 slide from UK. Stainless.....have to paint it black :-D

[Snowstorm45]

Yeah I've been looking for that one, I'd want stainless personally, good thing a touch of sanding can do that if its black.

[WithoutAParachuteWAP]

You shud all get the g26c full auto. I got that with a 50 round mag it's pretty sick as shit. It's like a cooler more compact mac 11 ns2. Ps. Never get mac 11's, they r the least reliable guns ever. I traded my mac 11 for a

Really nice trademark wilson arms 1911. Anyways, get the kwc full auto glock 26c. (if you can still find it...) lol

[NOCTURNOzombie]

mine fires cor bon 115gr +p+ JHP. :)

[Snowstorm45]

haha, sweet, I get it :)

[sidekicks112233]

I use power green gas for mine. How do you know when its full

[smalls426]

where did you buy this gun? cuz i might buy one with my christmas money

[Snowstorm45]

Depends where you live. If you're in Canada "007 Airsoft" has some (that's where I got this), if you're in the States try "Airsoft G.I.".

(007 Airsoft doesn't have TM Glock 26s anymore, but they do have KJW Glock 27s, basically the same guns)

[smalls426]

alright thanks man, i actually found it on a japan airsoft site, i think ill buy it with my christmas money

[schu740guy]

good review 5 stars

how much u buy it for and where

[davewhittno1]

One for sale near Manchester UK!

[Magnum570]

it looks like it kicks pretty hard

[dolman99]

what the stats on this gun?

[BOMBERBOY337]

it looks like its the size of a pocket pistol

[HIDcivic]

one of the nicer glocks

[orbits20]

what gas do you recomend

[Snowstorm45]

Only 134a (or Duster Gas).

Green Gas (or Propane) is too powerful in Tokyo Maruis, or any plastic-slided guns.

[tgiggf]

I use Ultra in the summer and green at winter on my TM P226, it depends on which one you go for, I wouldn't use green in a ksc p232 or even ultra but I would in a p226 from ksc or TM. I use green in my KSC 18c (with 50rnd mags) as well just not for my WA SIG GSR but my mate does with his WA's.

[SergentSprinkles001]

Will a ksc or kwa glock magazine fit in this gun?

[Snowstorm45]

No, sadly, I wanted one of the long 33-round (50 in airsoft) mags, but only KSC makes them, oh well... but other Tokyo Marui mags and the KJW mags will work

[LikkleFrizz]

he got it from uncompany you can go on there website its the best airsoft gun website noones knows it though

[SergentSprinkles001]

Is Uncompany a reliable website because it is in Japan

[Snowstorm45]

Uncompany is reliable, from what I've heard, but I didn't get it from there. I can't order from outside the country (I live in Canada), I got it from 007 Airsoft, in Alberta. You can't get guns that aren't partly clear anymore, so don't try, but you can still own them, so that's how I have this. BTW the clear guns aren't the crap ones either, G&G, ICS, and KJW have started making partly clear ones for us, and they're exactly the same as the black ones :)

[spictario]

i want to but this thing, but i dont know if its worth 90 euro's , i want to buy it for if an intruder or someone is coming. i mean, can you realy really hurt someone badly with it??

[tuckertimothy]

how accurate is it

[Snowstorm45]

Very, even though it's small it doesn't seem to matter. If I had tried I could've made every shot his the white part of the net on the basketball hoop. Regardless, I'm gonna get a silencer and extend the inner barrel, then put an Aimpoint on it. Oh, and Glock 17 mags too, as it's gonna be my primary. :D

[parkour720]

full metal???????????!?!?!??! plz tell

[Snowstorm45]

No, but the slide and barrel are really the only parts that should be, so it's not much of a loss. It's good plastic though, just don't use Green Gas/Propane.

[sammannj]

nice kick my friend has the same gun and its like a real pistol except sounds silenced

[cuuuuue]

i love comepack guns

[PhillandEv]

Same!

[cuuuuue]

i know right just so cool

[radnomppl]

im gettin this!

[orbits20]

sweet gun man

[newyorkcity863]

Where did u get the glock how for how much plz tell me

[paintballer9608]

where can i get and yes i did read the description but i need to know

[orbits20]

just search it on google product serach

[awesomeness1367]

wow it actually has kick

[awesomeness1367]

cool mini glock

[BM4A]

cool fps view

[b1782w]

i have glock 19c they are sweet  but my clip i think is not holdin gas the way its supposed to which is prolly y it was on ebay but i paid like 185 over a yr ago and havent used it much cuz i dont kno where to get another clip for it

[tylerpomeroy]

Yea, i have the 19 and my slide, which is metal, doesnt seem to want to fire the bbs. Ive oiled it, done everything and it wont work anymore. :(

[Snowstorm45]

If you have a metal slide and it's not cycling when you shoot, you're probably not using Green Gas

[STEALTHSNIPER969]

It might be ur recoil spring. If thats not taught enough, ur not gonna get enough power to slam the slide back in place.

[jackassdude12]

dude i love this gun i have just bought one from red wolf airsoft and it hold the full 20 rounds and it the same size mag  nice vid

[Snowstorm45]

I wasn't faking, I just wasn't tightening my hand at all.

[navyseal1000]

Snowstorm45 how bout trying another brand like a KWA G26 metal slide or a HFC G26 metal slide.... I think you can use other brand slides for marui GBBS (gas blow back)

[scotteh765]

what gas does the glock run on. and where can you purchase in australia. i have a glock on order and im not sure if i should still get it, is it a good gun?

[Gangga17]

that gun can burst. why dont you burst that gun?.. thats a nice gun. I want that but it's out of stock. so I buy the desert eagle (Tokyo Marui)is that a full metal? because in Indonesia that gun is full metal.

[Snowstorm45]

This gun doesn't have a burst setting, and the Desert Eagle isn't metal, though the slide has an inner metal layer.

[tondic]

burst?:) you play counter strike too much :)

[getodaze]

I'm pretty sure my cousin has that one

[fairman110]

yeaah ok thanks for the information

[smarzotais]

only problem with that damn thing is that its to damn small for my god damn hand :(.

[fairman110]

love that gun great thx

are u using green gas ??? pls answer

thx

[Snowstorm45]

No, I'm using 134a, though you could use Green Gas.

[nvtech11]

if you do use green gas, upgrade to a metal slide, cuz the tm g26 comes with a plastic slide, and will probably crack with green gas

[Snowstorm45]

Yeah, I'm trying to find a metal slide, but it seems all the ones for TM's 26 are discontinued...

[nvtech11]

check out uncompany . com, i believe they have some custom metal slides for the g26